I just finished my first doubleweave project (and it's only my second weaving project overall)! I'm so excited, and it came out looking great, but obviously needs a bit of finishing to add that final touch. I have a couple issues and I'm wondering if anyone can recommend some fixes:
1. There's a knot that I missed in warp and weaving, which is now woven in, but shows up on one of the outer surfaces. Is there anyway to replace, or at least lessen its presence?
2. Although I tried to be careful when weaving, I have a small float or two in each placemat. It's quite noticeable due the pattern and colors. Is it realistically possible to weave in a new thread and cut out the float? even with a looser weave?
3. My project weft is all 8/2 cotton, with the warp also being 8/2 on one side, and carpet rug warp on the other. I threw it in a cold soak w/ Dawn last night, rolled out the excess water and let it dry. It did shrink some, but not nearly as much as I thought. If I could get it to shrink a bit more I think that would help it, especially on the side with the 8/2 warp. This side came out a bit looser b/c the other rug warp kept it from packing down as much. Any thoughts?
4. Keeping selvedges neat with double weave that kept meeting, exchanging side, and going back again was a nightmare. The result: the warp is extra loose about 1/4" of the way in on both sides and there are lots of junky loops. I'm thinking turning the edges in a bit and sewing them with help neaten things up. Does this sound like a good idea? Is there a particular stitch you'd recommend? Anyway to help tighten the loosey goosey warp on the edges?
Any and all thoughts are appreciated. Thanks for your help! Pictures to come when things look better.
Comments