I am going to start my first baby blanket. I have a draft from "Weavers Craft" issue 27 which is in Atwater M and O pattern. I have some 5/2 bamboo in navy and azure blue that measures to a sett of 12. If I use a sett of twelve ends per inch, I would have 548 total warp ends giving me a width in the reed of 46.5 inches. My reed is 48 inches. At a warp length of 2.5 yards, I will need 1370 yards of warp thread. The draft calls for the same picks per inch as the ends per inch. I plan on using navy for the weft and the azure for the warp. The draft calls for knitting worsted weight yarn at a sett of 8. I know the finished product will be thinner but they live in the south. Should I calculate anything else? How do you think the blanket will turn out? Has anyone made a blanket out of 5/2 bamboo?

Comments

mneligh

I have made shawls out of bamboo as well as bathmats and other items, and love it.  I have used both UKI bamboo and my own handspun.  Judging by the shawls (examples on my project page), I'm putting a bamboo warp on my big loom to be used with handspun wool weft and am quite confident as to how they will turn out.  This bamboo is like 3/2 cotton, and I use 15 epi in a twill threading.

Claudia Segal (not verified)

I have used bamboo for several baby blankets and it works very well.  Has a lovely drape.  

If you are trying to check your calculations why not try the Weaving calculator here on Weavolution.  It is very reliable and you can print from your browser.  I always use it and like it a lot.

Happy weaving,

Claudia, Weavolution co-founder

sally orgren

You sound like you are on the right track! The only thing I noticed is I think you transposed the number indicating the width in reed. 548 ends divided by 12 epi gives you 45.6" width in the reed.

I have woven yardage with bamboo from Webs, but it was a special technique, so not apples-to-apples with your project. (I did Danish Medallion throughout.) You are right, the blanket will be thinner than the what the pattern called for.

I will be curious about your finishing since baby blankets have to go through the wash a lot. (Shawls & scarves, not so much.) Please post your progress and follow up!

mneligh

Quite a few things I've done from bamboo go through the washer.  I even knit a polo shirt out of handspun bamboo for my son.  I made a washer bag out of mesh fabric, and if it gets either baggy or dirty he sends it through the washer and dryer. It returns to its original shape.

I have even been known to send bamboo warp, wool weft projects through a cold water gentle cycle machine wash with line drying with no ill effect.

That said, always try  these things with a test swatch first.

buckskinhawk

Thanks for all the great comments. I am wondering changing from an m and o draft to a double weave. I did a double table runner on my rigid heddle so I think I should be able to do one on my four shaft loom. It will add to the thickness. Thanks also for the calculator note. I did have a typo on the width. I find matching the yarn that I have to the project that I want to be the hardest thing. It is hard to get the courage to warp such a big project but that is part of the fun of learning a new craft. Sometimes you just have to saddle up and ride that new horse.
Submitted by buckskinhawk on