Hi everyone,

 

I have a 48" countermarche loom and was warping the loom the other day for some scarves. Only about a foot wide. As I was walking back and forth and reaching across to feed the warps through the heddles, I thought how much easier it would be if I warped to one side. Besides having to reach across to operate the treddles, is there any reason not to warp to one side of a loom?

 

 

Comments

Joanne Hall

Balance is very important for all looms.  On jack looms, the shafts sometimes ride in a groove, and so a centered warp makes sure that the shaft will rise and fall perfectly so that it will not stick in the groove.  And sheds are better if the balance is good. The beater also will beat straight when the warp is balanced.

Joanne

Bonnie Inouye (not verified)

I read your message and wondered about this part: "As I was walking back and forth and reaching across to feed the warps through the heddles"

This sounds like a lot of extra work. Whatever the loom, you should be able to find a place to sit so you can see the heddles and reach the warp threads without stooping or walking around. Weaving on a warp that is one inch to one side is OK, but generally you want to sit at the center for best use of your legs and hips with treadles, use of shoulders and hands with shuttles and beater, and most even weaving results.

Bonnie

ReedGuy

Fitz, I'm just trying to imagine it. It might result in a lopsided shed. You have a bunch of tension on one side of the shafts when pressing the treadles and the other none. So one end of the shed would be up off the race and the other end on it. Might be a mess. Sounds like you need to sit something aside from the loom to get at the heddles easier. If it's just a narrow warp than maybe what your doing is fine. But if you have 800 ends, it's going to get old real quick with all the walking about.

Fitzroy

Thanks everyone,  I'm probably not walking back and forth as much as I might have inferred. But I still dislike reaching over and through. Working from the side is so much more comfortable. I suspect too that there is method I have yet to develope for myself that makes the job easier.

Joanne Hall

Fitzroy, what brand and type ofloom are you warping?

Joanne

Submitted by Fitzroy on