I'm a very "beginning" weaver - I've aquired a very used loom which is not yet in action as it needs a part or two. So I'm trying to decide whether or not to order a 15 dent reed along with my parts. There is a particular towel pattern I would like to try that calls for a 15 dent reed. I got with my loom purchase 8,10 and 12 dent reeds. I believe you can substitute a 10 dent reed for a 15 dent (I don't know with regard to this particular pattern if it states you can do that). My question is, when you substitute a reed and change the sleying pattern to accomplish your desired epi warp - does that have a significant affect on the project? If so what? Does it depend on the yarn being used or the pattern/type of weaving being done? Thanks!

Comments

Cat Brysch

But you know the old saying "It'll come out in the wash"? Well, that's what happens here. Change your thinking here. Does your project call for 15 ends per inch? Focus on the needs of the project calling for a certain size of warp thread/yarn and there needs to be 15 threads in each inch across the warp....how you go about getting that sett can vary with each different reed that you use.Try this....use your 12 dent reed and sley single for 3 dents, double for 1 dent, single for 3 dents and double for 1 dent, etc...repeating. This gives you 15 dents per inch in your 12 dent reed. Hope this is clear!

Sara von Tresckow

If your project calls for 15 ends per inch use your 8 dent sleyed double. The difference between 15 and 16 ends is not enough to really impact your fabric. That way you have even denting.

If you need 30 ends per inch - which sounds more like towels - put 3 ends per dent in your 10 dent reed.

While you can do the 2-2-2-1 type sleyings, it is best when starting out to try for an equal number of threads in each dent.

mssmith2711

Good to know there's not one "right" way, and apparently many options with no significant affect on the final product. I appreciate the help.

Submitted by mssmith2711 on