I want to weave a rug in twill.  My warp is 3-ply wool,  5 e.p.i in a 5-dent reed.  I am using a 2-ply wool doubled for weft.  I would like to know if when weaving rugs we need to have the 45 degree angle of the twill.  And also,  I would like to know if you think that my warp is ok or should I have doubles all my ends?  Thank you

Comments

Joanne Hall

You will get your answers after you weave a couple inches.  Then you will know if you are producing what you want.  Then you can decide if the rug is too thick or not thick enough or if it looks like what you want.

But, I think that a three ply wool does not describe the warp well enough to comment.  It might be strong enough or thick enough, but it does not sound like a very strong warp thread.  If the warp is completely covered, that will help to protect it when it is on the floor.  But the warp needs to be very strong.  Doubling it only makes it thicker, not stronger.

Joanne

Cat Brysch

a very popular warp as well. Wool is used in Navajo rugs, usually sett at 8 epi and that is quite fine and very tightly spun. Joanne is right, that, if the warp you are using isn't spun for use as warp, doubling it won't make it stronger. You could benefit from advice in Peter Collingwood's book, "The Techniques of Rug Weaving". If you have access to that book, focus on the twill. You'll be inspired and I recommend it highly.

I have a wonderful memory of Peter (back in '87), checking his work on a rug in progress on a loom, by standing up on the breast beam with his hands on his hips, casually checking out how it will look and feel while on the floor....I'm grinning all over again...

kerstinfroberg

Both Techniques of rug weaving and Rug weaving beyond the basics can be downloaded from handweaving.net. Here is the link to the Collingwood page.

1gardenia (not verified)

I am using wool made for rugs that I bought at Halcyon yarn (I think that is where I bought it) and I also have Peter Collingwood's book.  That is not really the problem and I could not find the answer in his book. The only thing that I have seen  is that plain weave should be square (as many epi as ppi), but I could not find anything about when you are using twill.  Should I try to have the 45 degree of the twill?  Or does it really matter?  That is really my question.  Thanks for your help.  (I am going away for a couple of days, so I won't be able to read your messages until Thursday)

 

Joanne Hall

The amount of bubbling you do with the weft for a rug is dependent on several factors.  Even with experience, if a weaver changes any of those factors, one has to weave a little to see how much bubbling is necessary.  Even just a little more thickness in the weft will require more bubbling.

One does not usually just angle the weft, but you make the weft undulate through the open shed and then bring the yarn down to the selvage before closing the shed and beating.  A thicker warp, a closer sett, a thicker weft or even a wider warp will all require the weft to be longer in order to undulate enough to cover the warp after you beat. 

Joanne

mneligh

One more reference that might help -- Warp, Weft, Sett.  You can find it used on Amazon, and  it's quite useful.  Look up the sett, and find the materials used to give the effect you need.

Submitted by Anonymous (not verified) on