Hi all,

I'm interested in trying to use flanges on my Leclerc Fanny warp beam. I've had no luck finding sources for them. Does anyone know where to get them, or perhaps how to make my own?

Comments

calebsb

Do you mean the rakes used to turn a plain beam into a sectional one?  Off the top of my head, I know The Woolery sells them online, among other places.  You could build the same thing with some lengths of 1X2 and the heavy staples they use to nail down hardwood flooring, or use thicker wood pieces to increase the warp length per turn.  My Leclerc came with 1" sectional rakes, which I hate (I had to pull out every other staple to even get started), but the staples are nice and thin and create very little disturbance.  If I ever build a new beam for my Macomber, I may use those instead of the pins. 

Dawn McCarthy

AVL has flanges but I highly doubt they will fit your beam as the Leclerc is not a smooth round beam.  Do you wind more than 18 - 20 yards at a time, much less and they wouldn't really be necessary.  

Dawn

Joanne Hall

I agree with Dawn.  Even a 30 yard warp is easier to beam using warp sticks.  I made flanges for table looms at a time when I was taking them to teach workshops and I wanted long warps on them.  I usually put on 20 yard warps using sticks.  So, I made flanges for them.  But it was not an easy way to warp.   It takes longer because you have to be so extremely careful with the beaming.  The selvage threads need to wind on just perfectly.  Using sticks is much easier.

Joanne

Weavin Steven

calebsb, flanges are not sectional beams, but rather two roundish-shaped discs that hold your wound warp in place on the warp beam. When using flanges, paper or sticks are not needed to keep your warp from spreading. However, one could use a sectional beam even if not warping sectionally. I suppose it would have the same effect as using flanges.

 Dawn and Joanne, I warp 15 yards, which is the max. my warping board can handle. But then often my project width does not vary from one warp to the next. So in my mind I picture being able to set the flanges one time, then forget about moving them until a project of a different width comes along. What am I not understanding about the difficulty of flanges? It would seem to me that I just could zip along without having to futz around with paper or sticks.

I took a tour of a Taos rug weaver about a year ago. He showed me how he winds on his warp beam. He removed the beam, and mounted it to a contraption on his celing. Now this beam was HUGE! He actually winds warps for many of the regional rug weavers. I estimate well over 100 yards, possibly even 200-300 yards per beam. He had giant flanges on he beam. He started a bit slow to get the yarn where he wanted, then fired up and wound that puppy in warp speed. Yarns flying hither and yon! It was a pretty ungainly contraption he set up, but the idea of the warp flanges was what caught my attention. Apparently it's not a problem if the middle of the warp spreads, it's all about the selvages flaring out to the sides. If you can prevent that flaring, the middle yarns will behave.

Sorry about the type sizes, can't figure out how to make all type consistent.

debmcclintock

Steven, I can't find my photos now but on a smaller version I put L shaped metal onto my warp sticks and used those as flanges.  It worked well. (google L bracket or ponder goods in your local hardware store).  Picture your warp stick with a L bracket attached on one end.  You'd have a couple with the L attachment and you drop them in alternating directons (left and right) as you start winding your warp.  I spaced them out as I started my winding and then just wound on.  It wasn't elegant but it worked.  Now if you are trying to emulate the process above in post #4, my suggestion isn't for you but I thought I'd mention it.  I don't have advanced woodworking skills so I improvise.  Deb Mc

SallyE (not verified)

The phrase "wound that puppy in warp speed" made me laugh!   I'll have to google where the term "warp speed" comes from - certainly not from MY warping!   My "puppy," on the other hand, moves at warp speed when I'm trying to catch her.

 

r1mein54 (not verified)

I think you will find the most common origion of 'warp speed' was done by Gene Rodenberry in his writings for the 1960s Star Trek.

kerstinfroberg

In Sweden we can buy flanged warp sticks - see my blog post here. The postage may be a problem, but the idea is free!

debmcclintock

Ah! Kristin, that is what I am trying to describe in post #5. Now I know I made flange sticks! Deb Mc

Weavin Steven

Thanks kerstinfroberg for the tip. I think I'll go to the hardware store to see if I can emulate the flanged warp sticks. I think you're right, postage would likely be too expensive. That Swedish site has some other interesting accessories as well.

Submitted by Weavin Steven on