I am weaving a sample for a Coverlet using 20/2 cotton for warp and tabby set at 30epi. The sample is working great and after I tried several weights of wool, I have settled on the one I plan to use.
My problem is this. The 20/2 is very smooth, looks great, but it has a lot of twist. When warping the 4 yard sample, I wound on a board with 2 strands, seperated with my finger. When we warped this it was hanging in ropes and had to be eased on the loom. I had to seperate the threads as I sley the reed, and in places, I have twist behind the heddles. If I don't ease this forward and check for tight spots, it is breaking-only 2 but this is only a 17 inch sampler. I don't want to deal with this on 9 yards of warp 48" wide.
If I sectionally warp this will this help to keep this twist under control.?? I thought it might as the spools on the creel would be under tension, and then the tension box would help keep it under control. It will still have twist when I thread but if I am careful, it should be maneagable.. I have been weaving a while, and have dealt with sticky warps before, but this is a big project, and any help would be appreciated.
Thanks in advance,
Cheryl

Comments