I've just finished setting up my loom (4 harness nilus leclerc) with a pattern I found on this website.  I can't seem to get the pedals to go down all the way & therefore the shed isn't wide enough.  My tension seems to be even & I've messed around with the tie up strings to see if that would make any difference (but it doesn't).  Here is the pattern I'm using with a 3/2 cotton: http://weavolution.com/draft/broken-twill-0I can't figure out what is wrong or how to fix it.  Any help is much appreciated! Thank you.

Comments

sandra.eberhar…

What I've found to be useful is to put a weight on one treadle to depress it as much as it will go, and look at the loom from the side.  What is the choke point?  Is a treadle hittin a lamm?  Are the heddles bottomed out? Lamms clashing?  Rollers hitting?  Jacks constrained?  Something limits the shed from getting any larger.

laurafry

Does your warp go over the back beam? Cheers Laura

veganweaver

What exactly do you mean when you ask if the heddles are bottomed out?  I can't visually see anything that would restrict the size of the shed.  If the tension is too tight would that do it? Thanks

veganweaver

ohboy.... now I'm just embarrassed.  It's been a long hiatus from weaving for me.  Thank you LauraFry.  You just saved me on a lot of frustration.

laurafry

Been there, done that.  You are not alone!  :)

cheers,

Laura

ReedGuy

Ah, the warp under the back beam trick. :)

Sam (not verified)

As Laura said...been there, done that...more than once! Sheila

sally orgren

A repeat offender, about once every handful of years. ;-)
Submitted by veganweaver on