I'm working on a Leclerc loom (believed to be a jack-type Colonial, most similar to this model http://www.leclerclooms.com/draw_inst/da_col_old.PDF , but I can't find a serial number, it's a friend's loom she found at a tag sale years ago)
I'm having some trouble getting the tie up and treadling to function. I'm trying to set up treadles for two different 5 harness satins (1/4 and 3/2). The harnesses and treadles are set up with Texsolv cord and arrow pegs but I can't seem to get them to sit evenly or balance.
The harnesses attach to the floating lam and jacks with texsolv cord, but I cannot figure out a way to balance the harnesses so that the warp lays flat in the reed while keeping the floating lam from resting in the lam support and depressing all the treadles.
The harnesses appear to not have enough weight to counter the treadle tie up pulling the floating lam down.
I've never worked with this kind of tie up before and I'm well out of my depth. Any assisstance or experience with this kind of loom would be greatly appreciated!
Thanks so much for all your help!
Comments