While weaving my first rug (weft faced, so I have to beat hard), the back beam keeps slipping forward. I think problem is with the old lever brake assembly.  A guild member told me that I can't weave rugs without a ratchet/pawl brake system.

Leclerc says I can, and just to replace brake parts.  Camilla Valley sells a updated Leclerc ratchet/pawl system that can be installed on my loom, but Leclerc says no.

Don't know what to do-have a rug all warped, but can't weave anything until I resolve this brake issue-any ideas?

C

 

Comments

laurafry

If you have the brake with a turnbuckle adjustment all you might need to do is adjust the turnbuckle to make the brake band grip tighter. Can you post a pic of what you have? Cheers Laura With an old Fanny on which I've woven rugs...

sandra.eberhar…

Most Leclerc looms have a ratchet and pawl on the cloth beam and a friction brake on the warp beam.  If the friction brake is in good condition, it can give you the tension you need for rugs.  The key is good condition.  Your note is a little confusing; you say that Leclerc said you can fix it, then you said they said no.  Several things can affect friction brakes with metal bands; the drum may be grooved (replace drum); the drum may be rusted (replace drum or replace band with heavy elictrical cord).  Camilla Valley is pretty good at diagnosing problems with Leclerc looms and I would probably follow their advice.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

sandra.eberhar…

Another thing to consider, if you have an old loom, is that Leclerc has redesigned brake systems for many of its looms over the years to make them work better.  Retrofit kits for these looms are available.  Again, Camilla Valley is the best source.

Submitted by cdrcweave on