lkautio (not verified)

When the heddle frames have bolted/welded uprights on the sides, they will stay rigidly in a rectangle no matter what.  Some looms have just the top and bottom bars, with only heddles (and maybe a soft removeable end tie) holding them together.  That means the top and bottom bar can move closer to each other as needed (rather than staying a fixed distance apart).  If the heddles are not stretched tight on an immobile frame they are easier to slide as you thread.

I've woven with 140/2 silk on metal heddles with no problems.  Very fine wools or fine singles cottons might like texsolv better.

Laurie Autio

lkautio (not verified)

All metal heddles are not created equal.  Inserted eye seems easiest on threads, twisted wire is harsher, and the stamped kind somewhere in between. 

Laurie Autio

tracyjayn (not verified)

I have made a few furry rugs with mill ends...  you can look at a picture I have in my projects.  I have not been weaving long, but have washed my rugs about 20 times and they have held together great.  I love them.  Let me know how it works out for you.  What kind of loom are you using? Where did your ends come from?

TinaHilton (not verified)

I've also woven rugs with upholstery selvedge and they're very nice, firm rugs.  Did you use a solid floor loom with a good beat?

Here's a picture I took of some of them.  Ignore the tote bag that's in the middle.  This picture was for a presentation on rag rug weaving at my guild.

Claudia Segal (not verified)

What sett did you use?  Have you considered doubling the warp ends?  I used seleveges and the sett I chose was 7 doubled.  I threaded the warp with 2 threads in each heddle and wove plain weave.  You want the warp open enough to allow the selvedge edges to stick out and create the shaggy look but you need strength and firmness too. 

Do you have a photo of the rug?

Claudia

swelch (not verified)

It depends on what sort of selvage you are working with.  If you are working with a really shaggy upholstery selvage, the warp will tend to get covered up pretty well.  You will likely be able to see it if you go looking for it though.  If you use something like Great Northern's jazz strings (I love these!) your warp will show much more.

I am in the middle of a long warp of selvage rugs.  I used Great Northern's 100% poly rug warp set at 8 epi, all black.  I used a variety of different wefts: cotton shaggy selvages, rayon chenille shaggy selvages, rag cloth, denim strips, jazz strings, andmachine-knitted i-cord. I like my results so far!  

TinaHilton (not verified)

I can't remember off-hand if I used 6 or 8 epi, but I know it was doubled for extra strength.  With the really hairy selvedges, some of my friends take the time to comb fringe so as little as possible is trapped by the warp.  The warp does show some, but how much depends on how much of the fringe is on top.

Aunt Janet (not verified)

Hi Liz,  I am a spinning maniac, myself.  I spend way more time spinning than I do weaving.  I can spin while working, in short bouts.  I own and operate a wool processing mill. While the carder is running, I set my spinning wheel where I can see both ends of the machine, to keep an eye on the operation.  I have to jump up often to add more wool, or make necessary adjustments, but I get a lot of spinning done.  I couldn't weave while running machines.  I need a lot more concentration for weaving.  I can just about spin in my sleep.  I do, however enjoy a free time spinning hour now and then.  That is when I get a couple of skeins in an hour, depending on size of the yarn.  I'm working on a Romney fleece that I carded into roving.  It is shiney white and I'm spinning rug weft yarn, bulky singles.  I spun five hundred yards yesterday while running the carder! 

There is an alpaca warp on my Julia (2 harness counterbalance loom), which I'm weaving with handspun wool/mohair including a bumpy novelty yarn.  I'm warping my Glimakra Standard in a log cabin for jacket fabric for my grandsons.  Next warp up will be my Glimakra band loom, which I will warp for trim on the jackets.  When I finish off the jacket fabric, I'll put on a rug warp to use up some of my handspun.  I'm thinking of a shaft switching pattern.  I took a class a couple years back on that technique.  I may change my mind before I get there.

In the mean time, I'll be spinning lots of yarn.  I have a couple of alpaca fleeces to get to this week.  I'll be blending the dark one with some very soft Romney.  the other is a white suri which I will also blend, but haven't picked out the wool yet.  I will probably use a Romney lamb wool, and throw in about 10% angora from my bunnies.  This will result in a nice soft yarn I would use for my grandkids sweaters, or blankets. 

OK I'm overplanning now.  Don't you love how one project leads to thousands of possiblities?

Aunt Janet

 

SundownAlpacas (not verified)

Wow, and I thought I was an over achiever. I have thoughts like that and lots of knitting patterns that I will someday knit before I leave this earth. LOL I also have a carding machine. I bought it mainly to do my own processing. Do you have any spinners to process yarn? Liz

Aunt Janet (not verified)

No spinning frames, and none in the foreseeable future.  I don't feel that I'm an over achiever.  Just have to keep my fingers busy.  I'm a figiter. If my fingers aren't occupied, I feel uncomfortable. 

I just came home from a trip to Missori, visiting my sister, her children, and grandchildren.  I planned to bond with those grandkids, so I brought along a bunch of Kumihimo disks and taught all of them who were old enough to do the very simple "fill in the gap" braid, and a more complicated pattern for the older ones.  We had a great time, and they will remember me.  I braided on the bus, in the airport, and on the plane. 

I also demonstated spinning for them on a tiny spindle that I brought along.  They were charmed by the crafts, and my attention to them.  Way fun.