dyeing2weave (not verified)

I do not do this - just mordant once - as the alum chemically bonds to the fiber and then to the dye there are a limited # of dye sites which once used up are used up.  I do rinse after mordanting to get rid of any loose alum.  I'm not quite sure what alum would be bonding to if you mordanted again - perhaps the previous dye layer.  Also, if you get too much alum on protein it gets sticky.

Judith (not verified)

Does anyone know if it is possible to paint warps etc. with natural dyes. I'm not really interested in buying pricey extracts as I have a lot of natural dyes on hand. I'm wondering about making a more concentrated stock and thickening it with sodium alginate. I have not been able to find any information about doing it this way after extensive research. If anyone has tried this I would love to hear about it. Thanks Judith

Judith (not verified)

Thanks Deb. That workshop sounds great but unfortunately I live in B.C. so it isn't possible. I will just try some samples and steam them and see how it goes. Thanks again Judith

dyeing2weave (not verified)

Yes, I do it all of the time.  I'm using extracts but the process would be the same with natural dyes stuffs - make a concentrated solution, mix it with gum trag (sodium alginate curdles some natural dyes stuffs) or if you like the more painterly look, don't thicken it.  Mordant the warp or you can put the mordant in the dye stuff.  It won't be as intense that way but works.  The amount of mordant is open to experimentation if you do it with mixing.  What is more difficult to do with natural dyes stuffs is mix colors - I don't have a good idea about how you might go about that other than painting with one color and then another.  After painting, you need to heat set the warp and then rinse.  I've been letting mine age between the heat setting and the rinsing (dry completely at least) which seems to help with color retention. 

Caroline (not verified)

This shows how from the front sheds 1 and 3 can be used together if you want to weave plain weave.

This is the view at the back with shed 1 raised.

Caroline (not verified)

You will notice I did not take the advice to use floating selveges; this is because I used a warp already on my loom, but I would recommend using them to give a neater finish. The floating selvege runs through a slot, but is not picked up by the string heddles. You go into the shed OVER the selvege, and come out of the shed UNDER it. The secret to making it work is consistancy.

You will need extra shuttles for this WAL, because Krokbragd relies on the change of colour to create its pattern. Each row of pattern consist of 3 throws of the shuttle. In the draft I have shown how the 3 sheds are made, and the order they are raised. You will be lifting the rigid heddle plus one set of string heddles for some of the throws. Again consistency is the key, always lift in the same order, its the shuttles that will change. if you lift in the wrong order, don't panic - all that is happening is that you are weaving it upside down. You can continue as you are if you don't want to unpick it.

Here are a couple of websites that cover Krokbragd on rigid heddles, though the techniques are a bit different, the drafts and end result will be the same:

http://yarninmypocket.typepad.com/yarn_in_my_pocket/krokbragd/

http://boisebarefootweaver.blogspot.com/2010/09/weaving-krokbragd-kitch…

and both weavers are using rigid heddle looms.

Good luck warping up! Any question, please PM me. Please remember I am in Australia so I'm awake and bouncing around while you guys are asleep. My evening tends to cover your morning so I'm not around in your afternoon and early evening.

Claudia Segal (not verified)

I am thrilled we are starting today.  I warped up using cotton carpet warp on a 10 dent rh last night but am now wondering if I should have doubled the threads.  Hmmm.  

A picture would be great, good thinking Laverne.  I searched Weavolution for krokbragd and found one by kendrick43: http://weavolution.com/node/12914 and several others.  I just put krokbragd in the search box and selected Projects and came up with several.  Here is one of the first I found:

Caroline (not verified)

Bonnie Datta has a pdf file on her website on Krokbragd and another very similar technique:

www.brdatta.ca/docs/Doc04.pdf

This is a bit more advanced, but should give an idea of how you can draft your own patterns.

I'm off to bed, but shall post something about the patterns tomorrow. I have found out that choice of colours requires some thought. My initial choice was not the best; photos tomorrow my time! I'm off to bed.