claudia (not verified)

Hi Cathy,

When I first got my Kromski, I had the same problem and I found the stand made a big difference, too.  I still check and tighten my brake before every new project but it usually holds through a project.  I have also found that folding a project is problematic and the tension is lost whenever I have attempted to do so with a project on the loom.  I have taken to securing the beams and just transporting my loom open when I travel with it.

Glad to hear things are working out better.  How fortunate you DH was able to put something together for you.  Can we see some pictures of it?

Thanks,

Claudia

Caroline (not verified)

I have also found folding my KL causes tension problems; it never goes back the same, grrrrr. Fortunately my loom is the smaller one so its not any more difficult to carry it open than shut. The idea of collapsing it is great for storage, and as a selling point, but not so hot if you have to take it somewhere with a project underway.

claudia (not verified)

Thanks Caroline, it's good to know I'm not the only one unable to maintain tension when I fold a warped rh loom.  You're right, it's a good selling point but difficult to execute.

Happy weaving, with an open rh loom,
Claudia

Phoeb (not verified)

On my practice piece, the same thing happened, but I think I was pulling too tight. I did order the stand, but they sent the wrong size. I am now waiting for the correct cross pieces and hope this helps.

Marsha A. Knox (not verified)

I had this same problem with my Kromski Harp.  I cured it by using a C clamp from the hardware store and securing the ratchet.  It happened once when I had a large project on the loom and the warp was never the same after that.  Now even though I know the looms limitations I use the c clamp 'just in case'!

whiteoakgrandmother (not verified)

There's a really simple fix for the rear pawl. I used a simple "turn-button", drilled a pilot hole and used a short threaded nail to get a good friction fit. So easy to turn on and off that it's become an unconscious motion when I advance the warp. I've never had problems with the front pawl, so I didn't do anything to it. Sorry, a computer glitch keeps me from posting a picture or a link here, but if you go to my projects and look at the "Ashford Loomstand" you can see what I did. I call it my "pawl lock". If you do this, you MUST drill the pilot hole so you won't split the wood on your loom. My little piece of wood is 5/8" x 1 1/2" x 1/8", but this measurement is not critical. You could use something more finished and prettier if you wanted to.

nanaspins (not verified)

I have tried to do two projects on my new Ashford 32" RH Loom. I have had constant failures with the ratchet and pawls, both front and back. I try to set the tension firm enough to get a good shed and it cuts loose! It also releases when I am trying to wind on. I am now using the C-clamps but it is aggravating to spend over $500 on the loom, stand, and heddles and have it malfunctioning out of the box. I have triple checked and they are installed correctly. The problem seems to be in the design of the pawl, which is too broad and shallow to fit snuggly into the ratchet.  Thanks to Whiteoakgrandmother for her fix. I will be doing just that but, I am also going to write to Ashford.

Thanks for letting me vent!

Claudia Segal (not verified)

 

What a bummer to have a beautiful new loom and such a headache!

Please let us know how it goes with Ashford.  I borrowed a Kircher rigid heddle loom from a friend and had the same type of problem with it.  I tried everything I could think of and it turned out I had wound the warp on incorrectly!!  Once she showed me what to do, it was fine.  Just a word to the wise, it's easy to do.

Claudia

Phoeb (not verified)

It's been awhile, but I want to thank you for this suggestion. My Ashford pawls kept coming undone and it was extremely frustrating. I bought C clamps for both the front and back and it works like a charm.

Claudia Segal (not verified)

It's a shame to have to weave like that.  I know I advance the warp frequently when I am on my rh loom and I would hate to have to remove the c clamps, move the cloth and replace the clamps.  I did have a small problem with my Kromski and when I contacted Tim at New Voyager Trading he sent me a replacement part immediately.  Now the loom works as it should.

Consider contacting either the retailer or the manufacturer.  They should be made aware of issues with their product.  I believe you can also contact Foxglove Fiberarts who are the distributor for Ashford looms in the US.  The contact info is on their website HERE.  

BTW, what are you making?  Have you posted photos in your Projects area?

Claudia

Claudia