conib (not verified)

Hi Deb ...

I'm looking into using the AVL warping wheel for making warp chains (bouts for beaming onto a plain beam).

What's the longest warp you've done using the warp chain method (creating bouts for beaming onto a plain beam)?  How wide was your widest warp using that method, and how wide did you make each bout?

Did you use a warping trapeze for beaming, or ... ?

Thanks in advance for all info and insights!

-- Constance

 

conib (not verified)

Hi Deb ...

Thanks for your post.  I'm going to try *one more time* to get my response finished and posted!  (It would be nice -- but probably impossible of course -- if Weavolution was like my email program, and would tell me that I have something in progress that needs to be finished or saved!)

Eenyway, yes, I know exactly what you mean by having to have an attitude adjustment about knots on the back bar.  I think I'm over that one (well-placed warping sticks, my usual method, should take care of any issues there).

However, the other attitude adjustment I'm trying to make is not having choke ties from which to tension the warp while beaming.

Also, I noticed in the AVL video where Lucinda is demo-ing chaining off the WW

        http://www.avlusa.com/index/videos/ww_cm/

when the crossmaker comes up and around the top of the arc, the WW suddenly loses its tension somehow (apparently overwhelmed by the weight of the cross maker) and all of a sudden Lucinda has a bunch of not-yet-chained warp on her hands (or rather, some on her hands and some off of them) with which she has to deal.  It doesn't look pretty.  Do you see that same behavior with your WW, or ??

-- Constance

 

 

alison.addicks (not verified)

Hi Constance

I have two AVL looms set back to back in my 24 x 20 ft loft.  The warping wheel and Schacht's winding station fit neatly 'twixt the two looms. My sectional beams sport 2" sections, so I calculate stripes or repeats per two inch section, wind on the number of colors required, going from one cone to the next and allow for a little - very little - crossover to take care of the sequence changes. I like the warping wheel, I just wish it was a perfect 3 yard rotation!

spinningalpaca (not verified)

You can do two threads per dent for a 20 epi sett and use two threads per weft shot for a basket weave.

klhow74 (not verified)

Or you can get a 2nd 10 dent heddle and weave at 200% density for a fine 20 epi cloth.  I am making some waffle weave towels with this threading with 8/2 cotton right now and it's working great.  I sampled ahead a time and the finished texture and weight is great in waffle and in plain weave. 

geeksdoitbetter (not verified)

 

"use two threads per weft shot"

i'm having trouble visualizing this - while i totally get how to put two threads in each slot/hole of the heddle, i can't quite figure how to use two theads for the weft

would you use two shuttles, each with one thread and pass them through one after the other?

or, would you first double the thread and then wind it onto one shuttle so that when it unwinds the two threads come off at the same time?

spinningalpaca (not verified)

You would use two shuttles or a shuttle that holds two bobbins (that could be a rag shuttle with a rod or a boat shuttle with the double bobbin chambers. You could probably manage a stick shuttle with two threads carefully wound on so that they won't tangle.

Caroline (not verified)

Hi Cathy, This should not happen! Assuming that your consumer laws are similar to ours in Australia, I would be returning it, with the receipt, to where I bought it, explaining the problem and asking for a replacement. If that failed too I'd be wanting my money back!

I don't know how the ratchet  is set into the back and front beams on your model loom, but there should be no way they slip! I do have a replacement older-style metal Ashford ratchet. It fits over the end of the beam, and has a square hole where the end of the beam is shaped and goes in, and then a screw goes into the very end of the wood to hold it all in place, and I assume that the nylon ratchet is set up the same. Its not very deep, so maybe the wood at end of the beams is damaged and has splintered? The drill hole for the screw would only need to be fractionally off centre for this to happen.

That said, I have a 12 inch Knitters Loom and have given it quite a work out under tension, and am very happy with its performance. and there are any other satisfied Ashford loom users around, so it does sound as if you unfortunately hit the lemon. Ashford should be aware of this problem. I don't know if they have a head office you can contact, but I would start with the retailer first.

Good luck!

wilowind (not verified)

 

 

My husband built a frame for the Ashford. We checked the ratchet & pawls to be sure they are on correct & they are. I think part of the problem with slippage was having to move it out of my lap &on the table every time I had to get up. I'll give it another try with the frame & see what happens.

Cathy S.

wilowind (not verified)

 

 

Just an update on the ratchet & pawl propblem I "had". The stand helped the problem a lot.. The tension has stayed steady ever since I put the loom on  the floor stand. Perhaps moving it around caused the problem in the first place.

Cathy S/Willowwind