claudia (not verified)

I tried to clean up the Microsoft "junk" but it wasn't there when I viewed your post in Firefox.  Sorry.

The link is great.  What a fascinating article.  Too bad we don't have 25 treadles or a 24 shaft loom.  All the great treadling to be done on one "simple" threading.

Claudia

rose Goldielocks (not verified)

you can try wrapping another section of your handspun around it, so the weak section is 2-ply,...

or you could add a warp dressing like some of the loom weavers do.

even tesion all the way across with multiple colors,= practice, and trying differnt things until you find one that works for you.

For myself, I try to tie the knots evenly, (the bowline that laverne showes for ending a warp is great!), and if it doesn't work, I even it out a little by weaveing a header of sticks. The uneven area gets cut off or fringed.

Sometimes, if I am switching beween 2 colors, I tie the two warps toghether, wind them together, and switch the warp order afterwords, but it doesn't work to carry a third color (like an edge stripe) over more than 2 or 3 warps.

If you want to see what NOT to do: check here: http://goldielocks-garden.blogspot.com/2010/03/misadventures-in-warping.html

tien (not verified)

I wish!!  I am starting to play with doubleweave and would LOVE to get my greedy little hands dyeing another set or two of gradated colors (a sequence of skeins that gradually blend from one color to another), because I think that would be really exciting with doubleweave - but until the wedding-dress is done, appraised, and carefully stored away, I'm not letting ANY dye into the house!

The good news is that the appraisal is scheduled for April 4, which means the dress MUST be complete by then, so I can start dyeing on April 5!

Anyone else doing dyeing?

Tien

esmesmom (not verified)

Only about 10 oz of freshly scoured wool last weekend, when we had warm weather and I could put my gear out on the porch!  It snowed this weekend so any more wet fiber work has to wait.  DH won't tolerate fumes, smells, or particles at all and the house has to be kept tight to hold heat.

Once the weather turns there will be lots more carding and dyeing outside.

Kristina (not verified)

Is there someone with experience, how to dye a cotton roving?  Some times ago I bought a  hand dyed cottonfibre at cotton clouds. Spinning was so much fun.  Wich dyes are usefull for cotton? Do I always have to card the cotton after dying- or is there a way to prevent this?

Grateful for a couple of ideas.

Kristina

Evelyn (not verified)

I have just started a new indigo vat.  My fermentation experiment last summer wasn't much good , so this time I am using Thiourea Dioxide and soda ash.  My test  piece of silk worked incredibly well and when the weather warms up again I will make a large vat and work outside. (yikes what an on and off again spring!)   I am dyeing the second of two woven shibori scarves, a sample piece.  I started with an over dye using Procion MX in rust and pulled the ties.  On the sample I will discharge the colour on half, then do the indigo.  I want to compare the effect of the indigo overdyed on the rust  and plain white before I decide how to to the scarf.

Then I will dye whatever else I can  until the pot runs out!  

 

jordanj (not verified)

 Cool! This sort of project is on my "to do" list. Maybe someday this summer I'll get to it....  Please, please post pictures when you are done!

Jennifer

tien (not verified)

I've just finished dyeing the next 66 skeins in my 400+ skein Sabraset dye sample set (dyed on 30/2 silk).  I have about another 132 skeins to go before the sample set is finished. 

The sample set consists of all combinations of the "pure" Sabraset colors, graded in 10% intervals (100% color A, 90% color A 10% color B, 80% color A 20% color B, etc.).  So a total of 11 skeins per color combo.  I added Washfast Golden Yellow, Washfast Magenta, and Polar Red to the "pure" Sabraset dyes to increase the color range.

Why am I doing this?  Two reasons: (1) I want to learn more about color mixing, and this is a good way to see, visually, what happens when you mix yellow and violet, or an orange-red and a bluish yellow, etc. (2) I'm creating a wonderful palette of colors I can later pick from when deciding what colors to dye for a given project.

Once I finish with Sabraset (acid) dyes, I'm going to move on and do another 440 skeins in Sabracron F (fiber-reactive dye), since you can dye silk both ways.  That should give me a very complete palette to choose from, and a lot of education on color mixing!

I'm hoping to finish the Sabraset dye samples by the end of Memorial Day weekend.  The wedding is in three weeks, so I don't want to do any dyeing after Memorial Day - otherwise, I might have to go to the wedding with dye stains on my hands!!  (I do wear gloves, but splashes happen!)

Tien

Evelyn (not verified)

This was something I had wondered about!  Because I used Procion MX it should just discharge and I don't need to do two steps? 

 

Evelyn (not verified)

I did a dye set using primaries/secondaries  in various strengths using Ciba dyes years ago and  though I don't use that particular dye anymore it is still a valuable resource. 

I had planned to do tertiary hues, just never got to it!