Rose (not verified)

Thank you Caroline!

 

I'm checking my own personal library to see which of the books I own (I've been collecting from thrift/used book stores for a while now), and I'll check the guild library. I have found that I own, Black's, New Key to Weaving.  No thick 'n thin in the index... I'll study it a bit...

 

I suspected that I could do a twill weave, and I'll have to try to figure out how to set the treadles so that I can lift the treadles in turn, as they are set to lift two at a time now.

 

I looked up what the "fell" was.  Thanks for the new term!  : )

 

I like your suggestion to try the rep weave, as it intrigues me greatly, esp. to try to weave in some fabric strips!  Our guild has a good book on rep weave that I got the basics from last night.  It's called Rep Weave and Beyond, Joanne Tallarovic.  I believe the sett in the reed was orginally 16 thick epi, but a member changed it after the first sample.  I think she made it less epi...

 

I read about the Diversified Plain Weave (DPW) in The Best of Weavers: Huck Lace.  This is where I found that the threading would need to be different that what I have to work with for this particular warp.

 

I will continue to explore the other resources you so kindly offered.  : )

 

With Gratitude!

lkautio (not verified)

I'll see if I can find some pictures to put up in the projects area.  I have a piece of Beiderwand on opposites with two heavy pattern wefts which clasp two other heavy pattern wefts, and one thin tabby which does not clasp and is not particularly visible but creates a firmer fabric.

To do the clasped weft, put one weft on the shuttle, and the other on a cone on the floor.  The shuttle passes through the shed, around the second weft and then back through the same shed.  You can adjust the position of the clasp within the shed by pulling it a bit.  Leave both threads at an angle and beat on an open shed so that you have enough slack to avoid draw in.  It takes a bit of fiddling if you want a precisely located join because it can shift a little when beat in.  It sounds more complex than it is.  If you don't need precise placement it goes quite fast and is fun to do.

Laurie Autio

Rose (not verified)

Wow, that sounds fun!  Thank you for saving me struggling to figure out how to clasp the wefts!  : ) 

 

What is "Beiderwand on opposites" and a "heavy pattern weft"?

Rose (not verified)

Our guild has Best of Weavers:  Thick and Thin, but a member has it out, and our public library doesn't have it... I'm trying to get my hands on it!  : )

 

You are right, I don't know much about calculating the sett, and I must admit, I don't know how to do what you described about figuring out the sett of each yarn by itself in the interlacement.....  I know the loom was first sett at 16 thick epi, but I believe it was too close, so that was changed.  It is a cotton warp with alternating thick and thin threads. 

 

In any case I don't plan to change the sett, or the threading of the heddles on this warp.  (Unless someone gives me a very good reason to bother doing so!  : )

lkautio (not verified)

I found the piece I was thinking of and posted a picture in the projects area.  I forgot (it's been 10 years) that though I sampled with a fine tabby, the final piece only had the clasped heavy pattern wefts, so it is not thick and thin afterall.  When woven thick and thin with fine tabby the fabric is a bit more stable and stiffer, but the tabby disappears under the pattern wefts.

Some interlacements are woven with two shuttles.  Usually one shuttle carries a finer thread meant to bind the structure and eliminate long floats.  In the common weaves (for example overshot, crackle, summer and winter) the fine thread usually weaves tabby (plain weave).  It can have a more complex interlacement, such as a twill or other structure.  The second shuttle often carries a heavier weft in a contrasting color.  This weft interlaces in varying ways to create the pattern.  The pattern weft is often supplemental - that is, it could be removed entirely and you would still have a viable piece of cloth (in whatever structure the binding is using).

Beiderwand is a less common structure that looks like a two tie weave but doesn't function that way.  It has areas where the cloth is one layer thick and areas where it is two layers.  It is traditionally woven with a fine tabby and a heavy pattern weft. It was used for coverlets traditionally.  I have another piece from this warp treadled in this way, which is thick and thin.

On opposites is a treadling technique.  Each pattern pick is followed by its opposite in a different color.  For example, on a simple straight 4S twill one might treadle with colors A and B: A on 1+2, B on 3+4;  A 2+3, B 1+4; 3x(A 3+4, B 1+2), 2x (A 1+4, B 2+3) etc. where the numbers (x+y) are the shaft numbers raised (or lowered).  One or more tabbies (or other bindings) may be used, or the tabby can sometimes be eliminated depending on the effect desired. Tabby may come after every pick, every other pick (most common because it allows the pairs to nestle together), every 4 picks, or as desired for the effect wanted.  It is usually fully weft-faced (no warp showing) but does not need to be. This kind of treadling heads toward what is sometimes called taquete on certain threadings.

That may be more than makes sense just yet, but in a few years it will.

Laurie Autio

lkautio (not verified)

To calculate the sett when you are mixing two yarns, for example 5/2 cotton and 20/2 cotton, you first need to know the sett of the yarn by itself in the interlacement (structure) of interest.  That is, 5/2 could be sett in a range depending on whther you are weaving plain weave, twill, etc, and depending on the hand desired for the end use (supple, firm, stiff as a board).  You could sample, or look setts up in Handwoven or various beginner books.  Let's say you determine that the sett of these two yarns would be 16 epi for the 5/2 and 32 epi for the 20/2.  If your warp will be half of each, you average the two epi to get the sett:  (16+32)/2 =24 epi.  If your warp will have one end of  5/2 for every two ends of 20/2 (as in diversified plain weave on a 3-thread huck base) then you adjust for the proportion:  (16 + 2x32)/3 = 26.7 epi (probaly round off to 27 epi).

Just by way of explanation, not to say that you ought to change the sett or threading on this warp!

Laurie Autio

Rose (not verified)

Thank you very much Laurie, for all your explanations. 

 

I have been able to follow a lot of it in theory only, mainly because I've been reading, and I am becoming familiar with some terminology.  You may be right, in a few years (!) this may all make more sense!  lol  : )  You must be VERY experienced. 

 

Thank you so much for taking the time. 

 

Now isn't this weird, I'm learning to weave, and learning to knit a sock at the same time!!!  lol  ...back to the sock for now...  : )

lkautio (not verified)

I've been weaving for 25 years - plenty of time to pick up lots of stuff along the way <g>

If you are interested in expanding your knowledge in a systematic way, a number of guilds and organizations have master weaver programs.  Even if you don't submit the work for evaluation (which is valuable in itself), weaving your way through it will teach you a lot.  Many of these programs can be done by mail, including Weavers Guild of Boston, Ontario Handweavers and Spinners, Potomac Craftsmen, Handweavers Guild of Canada, Handweavers Guild of CT, NH Weavers Guild, Weavers Guild of Greater Baltimore, Handweavers Guild of America, etc.  As a side note, about 75% of the guild master programs I have come across are based on the WGBoston requirements, which started their master program in 1952.  The program I did at Hill was partly based on WGB, but is done with 4 years in a classroom and up to two additional years of independent weaving of 30 or so original projects plus samples.

Have fun weaving,

Laurie Autio

djfiberarts (not verified)

Thanks for sharing that Mary Black website, Caroline. How cool is that.

DJ

Rose (not verified)

Thank you, that is great information to know about.  I will check those out!  : )