sequel (not verified)

I have done this. On a pitch band reed all you need to do is remove the end caps, they are held in with a couple of nails, and take the end bar out.  The "teeth" of the reed are mounted between two half rounds of wood and metal.  When you measure to cut your reed, you will have to allow an extra quarter inch or so for replacing the end bar, so cut accordingly.  Then you may have to pull out a "tooth" or two to replace the end bar.  Put the end bar in the space created and nail the caps back on - gently!

On the new "welded" reeds, mine had an off-cut at one end and no end bar on that side.  I pried off the oval brass plate they glued over the end, cut it to size and re-glued (epoxy) the brass plate.  I'm guessing that since the manufacturer shipped mine like this, it is just as strong without the end bar.

I have a friend who did this to join to short reeds to make one long one for a special wide project she was doing.

Buy one of the "expensive" hack saw blades, not the cheapest.  Mine was a bi-metal 8% cobalt, whatever that means.

 

 

spinningalpaca (not verified)

Thank you all so much!  I'll definitely pay close attention to the tips I've received here before cutting down the reeds.  I will wait until I find out if I get a used 36" Mighty Wolf.  I want to see what the maximum length for the reed will be in the beater before I make any cuts. The 37" length was just for discussion purposes.

 

Thanks again!

 

sequel (not verified)

The Dorothy and my Minerva both had reed channels that were not the type that could allow the unused ends of a wide reed to stick out either end.  I just happened to have a wider reed that was available for alterations.  Of course, I have cut down 60" non-returnable reeds that I ordered by mistake for my 42" loom with a closed end reed slot.  I now have a nice selection of real short reeds for my small loom.  I use my three reeds, 8, 10, and 12 for everything.  Maybe someday will consider a 15 if I start doing linen in finer setts since it is more likely to show reed marks.

flamingo (not verified)

I just completed Diane de Souza's workshop at Shuttles. The workshop taught the characteristics of some of the new odd fiber types: Tencel, seaweed, bamboo, soy, etc. and associated blends. It was a round-robin workshop. We wove samples crossing warps with identical wefts and then followed up with trying wefts of our choice. In addition to the yarns that were used in the warp, we had access to some additional odd yarns. For example, I got to weave with a blended yarn that had stainless steel in it. (Very interesting.)

We learned how to finish the items. My loom was warped with 16/2 SoySilk from SW Trading Company. The warp was set at 32 epi. My workshop loom is an 8-shaft table loom (with legs), but the "treadling" was annoying for such a fine yarn. Nevertheless, I spend Sunday washing, drying, pressing the samples and I was so struck by the difference in the feel of the samples after pressing! I may be in love with the SoySilk sample. It feels wonderful. I'm not sure how much of the warp is left on the loom, but I'm definitely going to finish weaving it.

Jeanne-Marie (not verified)

 I had a chance to see some examples from the work shop and o lalala the soy silk is lovely.

Thanks for sharing

flamingo (not verified)

I've finally got some photos of my weaving. I purchased additional Soysilk in spring green. (I'm not sure what the manufacturer calls the color. That's what I call it.) I've decided to weave the rest of the warp with it. Another photo on my projects page.

Caroline (not verified)

hi Rose, welcome back!

Ffirst of all, get yourself a good beginning weaving book. One of the best is the out of print Mary Black's Key to Weaving, or New Key to Weaving, depending on which edition it is. There is now a web site of woven samples to accompany the book, thanks to the government of Nova Scotia here:

www.gov.ns.ca/nsarm/virtual/black/results.asp

so the black and white photos are not such a problem. There is also the Debbie Chandler book Learning to Weave; it is not as detailed, but looks prettier. And a quick check of the index doesn't appear to cover what you are looking for. The Black book should be at your local Guild, or in your local library, and copies regularly appear on Ebay, at Amazon, Powells  Alibris,etc. I would not be without my copy.

With the threading you have on your loom, you can do plain weave, lifting shafts 1 & 3 together, then 2 & 4 together. You can also do some twill weaves, by lifting the treadles in turn. Using a thick and thin weft yarn will give you a textured cloth when done in plain weave, and you can experiment with altering how you beat the fell to see what effect that has  on what you are doing.

Also, there is this site:

www.handweaving.net/DAHome.aspx

which is an archive of out of print and out of copy write weaving books, magazines and patterns. Mary Meigs Atwater wrote a weaving book that you will find there ( name escapes me!) and you can download it for free to read. There are several text books on that site, and its somewhere you will refer back to time and time again, so its a good idea to bookmark it. You can search the archive by name or subject matter, and its quite easy to navigate.

Use this as an opportunity to see how the loom behaves, and how you operate it, and how the yarns behave. The warp may not be correctly sett for rep weave, but you will only find out how far off it is by trying. There will be others along shortly who will advise you in other ways, but they will also tell you to sample, sample, sample - and they are right, lol! This is your chance to sample, so you don't have to get it right, you do it just see what happens when you try something, and what works, and what doesn't. Above all, relax and have fun!

lkautio (not verified)

The first place I might go for thick and thin ideas is the book:  Best of Weavers:  Thick and Thin (ed by van der Hoogt, 2002).  I believe it is still in print and available through lys and Amazon.  Shadow weaves are very interesting in thick and thin, as are twills, laces, and many other interlacements.  Experiment with it both in warp and weft.  Remember that you don't need to alternate one by one.  If you pick up any book on color and weave, and then use thick and thin for the two colors (eg thin white, thick blue), you will get interesting results. 

As a beginner you may have trouble calculating the sett.  Figure out the sett of each yarn by itself in the interlacement (structure) you are using.  Then, knowing the proportion of each, calculate the intermediate sett you will need.

Have fun!

Laurie

lkautio (not verified)

Clasped weft is very interesting in thick and thin.  Try clasping thick to thin and v.v.

Laurie Autio

Rose (not verified)

The clasped weft does sound VERY interesting.  : ) 

 

I'll just have to figure out how I would wrap the wefts around each other... before putting them thru the shed, I'm guessing?  lol

 

Would you have a link to a picture of a clasped weft in thick 'n thin?  I've done clasped weft in tapestry weaving... although I'm a nube in that too...

Thanks, Laurie!