francorios (not verified)

Very nice!

Thank you for posting that!

It looks good.

Have a good day!

tien (not verified)

The color and design classes look really interesting!  Not in the budget just at the moment, but I'd love to take them in a couple  of months, when the wedding's over and I have cash again!

Thanks for putting me on to this wonderful source of online classes!

Tien

claudia (not verified)

Hi Erica,

Yup, that's how I set it up. There are three threads through the slots on each heddle and one in the hole. I put 4 different color threads on the loom so I could designate one to each corresponding shaft on a 4s loom.  Which 2 threads should be on each stick?  I only have one thread on each stick. 

Claudia

claudia (not verified)

Thank Erica. I have threaded the two heddles exactly as described in the Ashford article  . So, white is in the hole on heddle 1, yellow in the hole on heddle 2 and red and brown are in the slots, one on the left the other on the right.  I designated the brown as shaft 3 and have it being picked up by the first stick shuttle.  I designated the red as shaft 4 and being picked up by the 2nd stick shuttle.

When I try to get the 4th shed, which would be white and red, I cannot get the red to separate enough from the brown to create any type of shed.  Here is the point twill I am trying to weave with this structure. I am looking to use a traditional tie up of 1-2, 2-3, 3-4, 4-1. And it's the 4-1 that trips me up because it requires the 1st heddle to be in the up position and the 2nd string heddle to be up also. So, with the heddles in neutral, I pulled up on the 2nd string heddle and cannot get it to separate enough from the 1st string heddle to slip a pick-up stick under it.  The threads are not crossed, I checked that.  It just evades me.

Thanks for any suggestions you have. I am willing to try anything over the next day or two. Then, I have to abandon this to weave a scarf that is a sample I have promised.

Claudia

claudia (not verified)

Thank you very much, these are very helpful suggestions.  With the stick shuttles it is difficult to get them down in the same way you can with the heddles.  I think that may be the problem and, without a third heddle, it's just not possible.

I have abandoned this endeavor and am looking forward to the WAL with Erica for the 3s point twill.

My thanks to everyone who gave me ideas and suggestions.  These are all good ideas which can be used in many situations when weaving with 2 heddles.

For now, I'm moving on to a 3s Bronson draft and give that a go before I warp the loom with the hand dyed tencel I have.

Claudia

lkautio (not verified)

Hi, I've been weaving since 1985 and weaving on Weavebirds since 2004.  I started with a 24S 45" and then upgraded about 18 months ago to a 32S 36" bird. Several factors influenced my purchase of  a Weavebird - countermarche action, metal heddles, feeling of a sturdy traditional loom, balanced on both legs, price, and local support.

The current warp on the loom is an alpaca silk huck lace scarf.  I posted a picture of a canvas and twill project a few days ago.  Would love to see more projects woven on these looms.  A search of Weavolution shows 8-10 Weavebird owners.

I am not connected to LeClerc, but manage a yahoogroup for Weavebird owners and potential owners.  There are 43 members currently, some of whom are on this list, too. 

Laurie Autio, in MA

weavedixon (not verified)

Wow Carla, you have come a long way in a short time.  How do you thread the loom? Front to back?  Have you had problems threading this loom.  My loom is 45" 16 harness and I can barely reach from #1 harness to #16 harness.  The first time I warped the loom (and the only time so far) I didn't know about putting  in the lift plan to treadle the pattern for correct threading.  I'm looking forward to doing that this next time.  I have always warped from back to front and it's been a real learning curve for me to thread from the front. 

weavedixon (not verified)

Laurie, I am in awe of your expertise.  I will definitely find the yahoogroup for Weavebird owners, wish I had known about it before.  I have been weaving about the same amount of time as you but am not nearly as advanced.  I worked with color/texture and plain weave for 20 years before venturing into patterns.   I am not mechanically inclined so my husband has been the "mechanical" part of getting this loom set up.  The biggest problem has been the jams.  I just got my first practice warp off the loom and am eager to put on a bamboo scarf warp for the second.  I also have problems in threading as I have always sectionally warped and threaded from the back and that is not possible (that I know of) with the Weavebird.  I also am not experienced in the software, another learning curve but with so many patterns on handweaving net for now I will just use those. Lots of new experiences for me but I knew that would be the case and feel sure I can conquer whatever obstacles come up.  There are few weavers in my area and none of them have computerized looms so I can't just meet with others in person for help.  I am so thankful for my internet weaving friends/mentors.

lkautio (not verified)

Hi, To join the yahoogroup for the WeavebirdAerie go here:

http://groups.yahoo.com/group/WeavebirdAerie/

You may be able to find someone who is nearby through the list. 

I am not a mechanical expert, but this is what I have learned from Tom Beaudet and Francois Brassard.  For jams, first try working your way through the LeClerc Weavebird trouble shooting guide (on their website).  Watch and write down what happens with each jam.  Is it all the shafts every time?  A few shafts every fifteen picks?  One shaft all the time?  Does it happen only on one treadle?  Which one?  Does the motion feel smooth or "crunchy"?

     Make sure you only have one foot on a treadle at a time (no back pressure on the other one).  This is the most common problem of new users as it is different from many other looms.

     Make sure you don't leave the treadle halfway, always complete the cycle, pushing all the way to the bottom.

    Check that the treadles bottom out before they hit the ground (should hit bottom an inch or so above the floor so that you are sure the cycle completes).

     Check that all cords run through their pulleys (both shaft and treadle).

     Check the shaft cable tensions.

     Watch the solenoids to see if they extend and retract as they should.

     Check the motion on the cam board (the end plate) - it should go around a full loop, not up and down on the same line.  If it doesn't, the stoppers that limit the arms' (forks') movement may need adjustment.

If none of that does the trick, and the Aerie can't help, email LeClerc looms with a picture of where you think the problem is. These looms are great when they work well, but have a learning curve.

Laurie Autio

lkautio (not verified)

There are some tricks that make threading easier.  As I understand, you are warping sectionally, then threading from the front after beaming (aka back to front)?  You may not have been using a cross with sectional warping, but the depth of the loom makes threading easier if you add a cross. 

     Hang the lease sticks vertically from the back of the castle. This is easier to see at the distance than horizontally hung lease sticks.

     Remove the breast beam (it just pops off), the top of the beater, and the reed. 

     Get a low chair or stool and sit inside the loom. 

     On the 24 I was able to treadle the threading, but I did a variation of it.  I would lift the shafts in groups.  So, if the first 40 threads are on shafts 1,2,6,7,8,9 I lift those shafts and count out 40 heddles on those shafts and 40 threads, just like threading a 6-shaft loom.  Lifting them singly does not provide the double check I like for getting correct threading.  It takes a minute to program out the lifts (rather than just telling the program tromp as writ), but speeds me up in the long run. 

     On 16 you should be able to thread with your fingers or a hook, however you prefer.  On 32 shafts fingers are a real challenge, but you can tie the shafts together to get a few more inches.  However, it is impossible for me (at 5'7") to treadle the threading and reach to thread the back shafts, so I don't treadle.  You won't have this difficulty. 

    After you thread the shafts, transfer the cross to the front of the shafts and re-insert the lease sticks.  Put the beater back together and sley the reed.

     Put the breast beam back in, tie on, and weave :-)

Laurie Autio