eggplantlady (not verified)

That makes SENSE!  Thank you!  Now, I love the direct warping method which when I thought I could go with 20 epi I thought I would just put one 'doubled' thread through each slot and hole, thus not needing to thread each hole individually by using one of the two threads in the slot.  My two questions:  1) is that possible?; and 2) if I use your count (thank you so much for pointing out that the difference was 25% - it was easy to gloss over 2.5 threads!) then would some method of direct warping be possible? 

claudia (not verified)

I was about to do it when your note popped up. My plan was to direct warp through the back or 2nd heddle. Then beam the warp, cut the front thread and rethread through both heddles. Claudia

apw1970 (not verified)

Also: where is a good supplier for BLEACHED linen thread in either a 40/2 or 70/2?  Most places that carry them have them on small spools and I will need a lot of yardage.

Mary C (not verified)

Hi Cherieann,

I hope to get a Schacht Baby Wolf someday so I can try a loom with  more harnesses.  Also learning on my own but when I move to Oberlin this summer I hope to find a guild there or least someone to exchange thoughts with in person.

I've seen a couple of your projects and think you are doing a really good job!

Mary

dognapper2 (not verified)

In search of inspiration...

Tote - Old newspaper reprint with layout possibilities. Thinking set in bottom/side seams to make it wider. Lined. maybe fringe end trimmed short and folded into outside pocket...

A challenge project nothing short of genius! May have seen this on Ravelry or here at Weavolution a while ago, but googled it from memory and found it pictured on flickr.

Interweave bag of the month links

Laurie in Maine

MUST find uses for newly woven "fabric" or yarn stash will just end up turned into fabric stash!

tien (not verified)

What's wrong with the folded tote?  You could always use some other fabric for the handles.

Or use a standard tote bag pattern - handwoven is only fabric, after all!  If you need to piece it, I'd overlap it, stitch it twice close together, and then possibly cover the overlap with some sort of decorative binding - but it can certainly be done.  Or you can just sew a regular seam - that's what I did with my wedding-dress fabric, when my fabric wasn't quite wide enough.  If it has a regular pattern you can match up the pattern very closely so the seam is nearly invisible - on my wedding-dress you can see it if you look really hard, but it's nearly invisible.

Tien

dognapper2 (not verified)

Nothing is "wrong" with the folded tote - except if I use something else for the handles it won't be the "folded tote". I'm not much of weaver but can recognize what I have to work with (so far) would not work with that pattern.
It's on my list to try something specifically that would. Eventually.
 
I guess I should have titled this post "Terrified of Scissors"!
 
Perhaps a group challenge for the newbie weavers, hobbyists & dabblers on this list who've managed to remove a few things from their looms but have yet to take scissors to anything.
 
I may be in the wrong group...a little petrified of making that first cut.
Today shall be the day. I have a plan :)
Laurie

dognapper2 (not verified)

Fear of taking scissors to woven material (sort of) conquered...and a lesson in what warp faced means.
Some raveling issues to deal with; technically, most of the cutting was done with a rotary cutter ;) From 3 skeins of yarn to a lined bag in less than a week.

 

 

jemwork (not verified)

Your tote is lovely. The weaving looks great. What fibers did you use?

Did you wash/finish the fabric in any way before cutting? That could help set the cloth so there is less tendency to fray. Another treatment to control fraying is to carefully cut & then immediately iron on an iron-on interfacing. I've done this with California rag fabric, which can fall apart very easily.

Did you use a commercial fabric to line the tote? That can help stabilize things too.

dognapper2 (not verified)

I'm using up freebie acrylic - listed on my project page but not much write about. It was free :)

I did line it - used some leftover lining I had cut away from a skirt my daughter bought at Goodwill and asked me to shorten. By more than a foot! It's pretty and when I asked her if she recognized it she wanted to know if the bag was reversible. But then saved herself by saying, "But why would anyone want to?" [grins]

I stay stitched every cut as soon as it was made. My cutting board is 2 feet from my sewing machine and I handled it carefully to get it under the presser foot ASAP. Probably normal to loose every warp right up to the stitching to fray. I double stay stitched most of it.

I made another bag!

Used up the last of the free warp - but this time I knew I would get upholstery-like fabric and planned to cut it for another exercise in Fearless Cutting. Cutting comes easier with practice?!!  It needs a button or two but I stuck a scarf pin to the top someone gave me. Project page.