claudia (not verified)

Hi Karen,

You may need to add some weight to the back shafts with only a few threads.  How many shafts are you using and what structure are you weaving with only 3-6 threads on a shaft?  Are using a jack loom or a countermarche?  I'm still learning about countermarche and adding weight would probably not apply if that is the case. 

Claudia

Alison (not verified)

The afterbeat works well for me too.  In my dry dry climate, I've found that a little antistatic spray sometimes helps.

Also, have you sampled your sett?  A denser sett increases the problem.

Has anyone had success with sizing a silk warp?  I have not tried this.

Let us know how it goes and post pictures!

Alison

ScarlettLux (not verified)

Thanks so much everyone for the ideas, I will certainly try them - All.  Anything is better than fixing the warp every single pick.

A little more about my project:  I wouldn't consider it an extremely dense sett, but I wanted the fabric to be both light and dense enough to show the Swedish snowflake pattern well.  The sett is 40.8 epi (160 epd) and I have it sleyed 4 ends per dent in a 40 epd reed.  I don't have any Imperial reeds so pretty much everything I do is Metric.  There are no tangled strands, I've gone through them about 3 times by now (at 700 ends that was time consuming)  There is some pilling, and the stickiness only occurrs within the dents.

Looking forward to any other wisdom you see fit to extend!

 

Crystal

ScarlettLux (not verified)

I don't have any Imperial measurement reeds, just metric, so no 10 dent reed although I am considering buying some reeds that measure in inches instead of decimeters.  It can get confusing doing all of the conversions from American weaving patterns.

I am not using a temple.  I was taught to not use one, but I may consider it for this bad boy. :)

 

Hey Su - I am following the sett prescribed by two different patterns, one from a blog on Swedish Snowflakes by Evelyn Oldroyd and the other from the Silk Snowflake and Stars pattern on pg 55 of The Best of Weavers Twill Thrills book.  They have 30/2 silk set at 40epi and I liked the look of the material it made.  I also made up a sample (but did not wash it) and again I liked the way it looked and felt, the pattern is of utmost importance in this particular piece.  I will take pictures when I can get a bit more going and have something nice to take a picture of!  I am definitely going off to the store for child's hair spray conditioner.  I had been trying water spray which does help a bit, but the conditioner may help even more.

My warp is gold, and I dyed it myself, so maybe that's got something to do with it.

 

Oh well, come hell or high water I will get these stoles woven and will post some pictures.  Thank you all so much for your help.

lkautio (not verified)

I've had good luck with gelatin sizing with a very sticky silk warp.  It was a much thicker singles which I also had to rebeam to a more open sett.  Stickiest yarn I've run across outside of brushed mohair.

Laurie Autio

rose Goldielocks (not verified)

You have done nothing really wrong, just not pulled your weft tight enough.

try this....

weave 4 small diameter sticks.(you will remove them later)... toothpicks/Q-tips/skewers/narrow dowel rod/ pencils/  into your warp.

Push the warp as close together as it will go on the sticks, so that no stick is showing. Wiggle the warp a little bit, let the tension relax a bit, then tighten it. This should give you the "natural" width of your band as warp-faced. Take a ruler and measure how wide your band is. or, mark the edges with a pen on on one of your sticks.

Now, pull the sticks out, and weave your weft in, pulling it as tight as you marked down. (if you marked the edges on the stick, it is real easy to lay the stick on the weaving line to see if your marks line up with the selvages of your weaving.)

It will take between 4 and 6 picks for your band to "narrow down and settle in" so it looks nice.

Warp faced weave has nothing to do with yarn thickness, except that when you go too thick it is very hard to achieve, but "too thick" means something as thick as 1/2" diameter clothesline.

The other thing you can try, is to pull the weft as tight as it possibly can go, for 3-4 picks, then don't pull the weft as tight, but let it settle in to the natural width. I have lots of bands with the first 6" that are wide, then narrow, then medium, then woven at the same width all the way though, as I figure out what width looks best. These are bands from  belts, and when I finish the belt, I cut the "bad" end off and throw it in my bag of samples. (I normally warp about 24" longer than I think I need just for this purpose.) I refer to these bands later when I want to figure out "If I want the band to be X inches wide, how many threads do I need for That Pattern?? using THAT yarn ??? 

 

Great to see people trying.. boy oh boy do I wish I had someone to ask questions of when I started weaving, I had to "raccoon" things untill my bands looked like the picture in the book I was using (no nice color pictures, just black and white drawings).

 

Sharon

tobytottle (not verified)

Thank you so much Sharon for such a detailed response! I'm going to try it right now!

Toby.

tobytottle (not verified)

Thanks for your input too, Laverne, you've both been a BIG HELP!

With your help I finished that piece off and I'm now halfway through another in the comb style, just to make sure I know it! I'm confident about the technique but I'm really struggling with 'sticky' warps at the moment. I haven't made it easy for myself I'll admit - I'm working on a wider band now, so there are more warps to keep an eye on, not to mention the fact that I'm using a synthetic "wool", the very cheap kind! Which is really a bit on the thick side for this I think, and sticks like crazy. I'm also using regular parcel string for my heddles which seem to clog up with fibre as soon as I change the sheds over once or twice!

Am I just making it unnecessarily hard for myself, or is it normal to struggle with sticky warps on EVERY shed change?!

My next logical question is: can anyone recommend a few yarns/fibres that give the least sticky warps, the most attractive final result and the best heddle strings?! (ideally something I could either find here in the UK or buy online!)

Many thanks in advance!

Toby.

Aunt Janet (not verified)

 I just ordered some cotton warp from Laura Fry to try out for backstrap weaving.  I'll let you know how it works.  I think this is going to be a winner.

Aunt Janet

indigojoe (not verified)

I'm relatively new to weavingr but recently purchased a 16 shaft FDL with Dobby 1 circa 1986 last year. I thought it might be kinder to my hips.

I tried a double width replica of an ancient Greek cloak for my partner in 8 ply cream wool for my second project on this loom. I wove a tubular sample in a balanced twill for the  first  8' then left a gap and proceeded with a single selvedge on the right hand side. No problems except  I think I would sley the selvedge side a bit more open just for the last inch on the right hand side as there was a slightly visible seam down the middle. However, none of the Greek re-enactors noticed.

Pat