Caroline (not verified)

hi Claudia, Now you have really put me on the spot, hehe!

I have just posted the Nina Holland book to Bolivia! She wrote a book called The Weaving Primer back in the 70's that covers, Inkle, Frame and Backstrap weaving, and it has this fabulous chapter on doing brocades using some of the overshot weaves. She actually has a Rosepath sampler in there and explains the whole set up on a frame loom, which is easily adapted onto a rigid heddle loom or a backstrap. You can pick the book up quite cheaply secondhand, though a few of the dealers are realising that old weaving books are suddenly in demand and are therefore upping their prices.

On the rigid heddle loom the easiest way is to use the eyes for the first shaft - the rest of the warps go through the slots, and you can organise a continuous string heddle for each extra shaft. You then pick them up in the order they appear on the draft, like using one of the older table looms. Nina Holland had a slightly different approach, and perhaps you can sweet-talk Laverne into explaining it in about 4 weeks time. From a rigid heddlers point of view, which is similar to that of the backstrap weaver, Rosepath and the other overshot patterns are just automated forms of hand-picking brocades. Laverne wove her towel using typical backstrap techniques. She used the rigid heddle as a spacer rather than as the first shaft, and created 4 continuous string heddles exactly as the draft said, 2 in front and 2 behind the RH.

I hope that explains it. Personally I think its simpler going down the string heddle path than trying to battle with 2 or 3 rigid heddles. There is no trying to adapt patterns - you can read them straight off, and as long as you have the space to add the extra rows of heddles you could even do a satin weave -  though anything more than 4 shafts is going to be very slow. You lift the string heddles in the same order as they are treadled, and can even get a bit fancy and lift 2 at the same time. If the RH is threaded for plain weave, and you  thread 4 string heddles and place them in front of the RH you have the equivalent of a 4 shaft 6 treadle loom, though you would probably not want to do this too often. It would make good borders though - something to think about?    

mischiefmanaged (not verified)

Jean, you might try attaching it somewhere a bit higher and sitting on a chair (horizontal warp that way) or try the nifty thing with 2 chairs that has been posted with pictures somewhere in our group . . . rats, I don't remember which thread. Aunt Janet, was that you??

I have been trying my weaving sitting on a chair and have not had any soreness problems, so I hope you can experiment and find what works for you! Cindy

franee (not verified)

Hi Jean,

Your weaving looks great!  I only took this up this last week from the wonderful tutorials from Laverne and am really enjoying it too :) "opening the door" is a good way to put it.

Cheers

Fran

Caroline (not verified)

Thank you for this Claudia!

I am debating whether to start afresh with an empty loom, or try my hand at tying a warp  onto an existing warp - I have this particular threading already on one of my looms and its been going nowhere for over a year. And no, that was not why I suggested this, hehe! That warp is not suitable for this project, ;-(, and was not too successful anyway, though I did have in mind I might be able to tie on another warp and avoid having to rethread the heddles. I will need to rethread the reed anyway, as I want to use much finer thread.

IF I try tying on a new warp, what are the pitfalls to watch out for? Or am I better off leaving it for this time and starting afresh? and trying the warp business when its not so hot (into the 2nd 40C+ day over here) and I can take my time?

claudia (not verified)

I have only tied one warp onto another once and it worked out well. I know one problem can be getting the knots through the heddles. Some believe it is not a time saver. If you have to resley the reed why not do it from the front and sley the reed and then tie onto the existing warp in front of the heddles and save the threading.

Claudia

Caroline (not verified)

Mmmmm! I hadn't thought of doing it that way. Thanks for the suggestion! Now for a spot of stash-busting!

Caroline (not verified)

Jenny, thank you for that link! That makes the weaver's knot soooooo easy - I think I am knot-challenged, so your clear photos are a real help!

I originally planned a Rosepath project like this back in 1991, and warped my loom up, and then we moved. I had even drafted out various motifs. That poor loom got dragged from pillar to post; the warp remained unwoven because the loom was in storage or I was too sick to weave it, until I parted with the loom in 2005, thinking I would never get to weave again. I even ditched the warp, and I only recently found my draft of one of the motifs I was going to use.

Now I have the chance to work on something very similar, and this time I intend to get it finished. I think I should re-warp, to make sure I get it right. This has been nearly 20 years in the planning, a few extra hours in doing the warp properly is neither here nor there.

claudia (not verified)

OK, I decided I want to use this opportunity to make placemats. We have been using these horrible straw things that I won't even photograph.  I calculated the width and length and put those numbers in the Weaving Calculator here and based on the information I entered, am winding a warp 178 ends and 4 yards long. I am almost finished with the bread cloths on my Baby wolf so I'm going to use that loom for this project.

I am going to print the rosepath threading and see if I can figure out how to weave one of the designs from Laura's pattern. I would like to have the butterflies go up the edges of the placemat and the daisies along the top and bottom or just the bottom. This is my challenge, how to have the motifs in the places I want them. So, I am sampling once I have the warp on the loom.

Claudia

KSfiber (not verified)

I've tied onto the existing warp twice.  The first time I did it I used square knots, with the same result jennybellaire's friend had.  Lots of the knots came untied.

The 2nd time I did it I used overhand knots.  The was more sucessful.  None of the knots came untied, but I did have to ease them through the reed & heddles in small sections.  I would do it again if I wanted the same threading. 

I changed the border on the 2nd one so I pulled the whole thing forward so the beater & the warp I wasn't changing were against the breast beam.  Then I tied slip knots in large groups of the warp to keep it from slipping back.

I put lease sticks in the warp in the plain weave sheds so I could rethread the borders.  Actually, that was the first thing I did.

It saved me a lot of time & I knew I wouldn't have any threading errors in the center part.  This was on a small jack loom.  I'm not sure it would have worked as well on my large countermarche loom because the beater would be in the way.  I would have probably had to resley the whole thing when I rethreaded the border.  It would have still been faster though, because I would have had the threading.

There are some people who think tying onto a dummy warp all the time is better because you can weave more to the end of the warp.  The knots can be closer to the heddles & still get a good shed than the dowel can.

 

Caroline (not verified)

I think the 8/2 crochet cotton is the same, according to the Interweave chart I have, only it does not give WPI, just how much you should get per lb and kg, grrr. Its the same chart as they put in Spin-Off and Handwoven, so perhaps Spin-Off gives the WPI.

I'm busy trying to work out if I have enough warp thread for this at the moment, otherwise I have to go to a 20/2 yarn, which is much finer than I want to go - I DO need to be able to see the stuff! Otherwise I am going to have to buy some in from Petlins, which will take up to next week before it arrives.

Its just hit 38C here this morning ( its 9.30 am) so its not good thinking weather, or warping weather for that matter!