philgreer (not verified)

 not sure if im in the right spot for this question, but, here goes.

I bought some cotton the other day from big W and its 3ply cotton, thats all the label says, doesn't even tell me roughly how many meters or yards... *NOTHING*   Being in Australia our measurements are different.  All books and websites that i visit talk about cotton being 10/2 or 20/2.  so to make some for of comparison what is the 3ply cotton that i bought...   is it  8/2 or 10/2.  I have no idea?  any ideas how to convert this or figure out the size?  so i can compare it to my books and web sites. any info would be wonderful.

Regards  Phil 

Caroline (not verified)

hI Phil, what brand is this?

Here in Adelaide we get Milford/Semco Perle #5 and a 4 ply knitting cotton from Big W - the Perle #5 is finer than the 4 ply, but like you say, its hard to work out what they actually are in weaving terms. I think the only thing we can do is try the wraps per inch method and see what it compares to. Perle #5 is not as fine as the 20/2 cotton I have thats come from my local Guild, and I'm guessing its probably the same as 10/2 perle cotton, but I could be way off here.

Since I've only used my Perle on a backstrap loom so far it hasn't been really important for me to find out what it compares to, but like you I'm interested if anyone who can throw light on this as I want to use it for other projects where its size will be relevant.

philgreer (not verified)

 Hi Caroline,

Thanks for replying, i would really like to try and get my head around this.  Its milford Soft knitting an crochet cotton 50g, 3ply     then on the barcode it says its 4ply equivalent.

Phil

Caroline (not verified)

Phil, I know the one. I'm off to fossick in my stash and do a spot check in a Handwoven magazine to see if I can get an approximate. Back shortly.

philgreer (not verified)

 Wonderful and thank you.  :-)

Caroline (not verified)

Phil, The Milford/Semco  4 ply is 4 ply @ 1720 yards per lb or 3460m per Kg.

Our Perle# 5 is the same size as 5/2 Perle, and works out at 2100 yards per lb or 4230m per Kg.

This is as near as I can get it. Hope this helps with your calculations!

philgreer (not verified)

 so strange, thank you very much for you help.

i have no idea why there packaging states 3ply.

 

Caroline (not verified)

Count out the number of slots and eyes in your heddle for an inch - that will give you the ends Per Inch - epi - now double that, and that will give you the number of wraps per inch your yarn should be. Because plain weave warps and weft yarns wind around each other, you allow half the wraps for the warp and half for the weft ( if you are using the same yarn).

There is an article on this page:

www.bellaonline.com/articles/art15510.asp

That will explain yarn size classification to you, and what the sizing means.

If you have a 10 epi heddle, you will be looking at a yarn of approximately 20 wpi.

To find the number of wraps per inch of any yarn - wrap it around a ruler, making sure each turn of the yarn touches its neighbours, but is not crowded, and count how many turns it takes to cover an inch.  Don't pull the yarn tight as you wind or it distorts and gives a false result. This will give you a ball-park guesstimate - because we all wrap differently.

You can also find the wpi of the Homespun using this method.

 

 

nctxweaver (not verified)

I am guessing that the Mountain table loom has a metal reed in it.  You'll need to find out what dent your reed is, that will determine what type of warp/yarn you can use.   The most common sizes are 12 & 15 dent (12 & 15 threads per inch). It will say it on either end of the dents, or you can measure how many spaces there are in an inch. 

Homespun is pretty beefy, it would be best used as weft and get yourself a thinner yarn for warp.  Something in the range of size 10, size 3, size 5 mercerized yarn (or similar in size).   I am talking about commercially available yarns because they are more recognizable for most non-weavers. 

To find out if the yarn will work in your reed, measure your yarn by figuring out the wraps per inch.  You wrap your yarn on a ruler within an inch measure.  Just wrap the yarn side by side over the inch.  Count the wraps inside the inch measurement and divide in half, that tells you what size reed you need (ie.- 6 wraps= 3 dent/10 wraps=5 dent).

One more thing to consider is that commercial knitting yarn is not made with a high twist which is necessary or preferred for a warp yarn, the beater on weaving looms will continuously go through the yarn as you weave and .  beat - so they yarn needs to be able to take that continuous aggitation or it may fall apart. 

I hope this helps, don't let the warping process hold you back.  It was not my favorite part of the weaving process, but I have learned that if I want to weave I must warp my looms to do so.  I still make threading mistakes, but my reward is the actual weaving.  

 

Elaine in TX

claudia (not verified)

Hi Joan,

If you are anxious to weave but don't want to work out the warp you can buy a kit with a pre-wound warp. Several of our advertisers, Laura Fry, Glimakra (Joanne Hall), Lotsaknots, to just name a few, sell kits with pre-wound warps. Many others sell kits with the yarn and directions for exactly what to wind and how to weave the chosen item.

Our advertisers are all here and each name is a clickable link to their website or click on the ads that rotate on every page of the website.

Claudia, Weavolution co-founder