Loominaria (not verified)

Glimakra's Susanna also has a warping set-up built in, plus lease sticks and beaming sticks, and metal ratchet/pawl. If they had not discontinued the 31-inch width, I would have purchased that one instead of the Ashford 80 cm.  Also an available stand and second heddle kit.  After reading about 2nd and 3rd heddles, I decided a 4-harness loom would be a whole lot simpler.

I'm starting to tire of the folding Ashford Knitter's Loom, because it keeps loosening at the folding point, where it attaches to the stand, and the heddle rests also get loose.  I'll never get another folding RH loom.  Still waiting to see what width(s) the Glimakra Susanna will have in the future.  Oh, I just noticed that Little Susie will be joining the Glimakra looms, and it will fold. Still under development.

Kurt

Loominaria (not verified)

Sorry, I don't have the loom and can't find a photo online. It's in the description on the Glimakra USA website, but they don't show a picture. You can e-mail Joanne Hall at Glimakra and ask if she has a photo of Susanna in warping mode: [email protected]

Kurt

Trying to figure out if other folding looms have bolts or pegs to keep them solidly in the unfolded position

Caroline (not verified)

I have a Knitters Loom, and I love it! I thought at first that the 12 inch would be too small - I do have a second heddle kit for it if I want to get ambitious - but I don't think that will be an issue. I do have a couple of other RH looms. One is home made and a WIP so not in use, and the other is a cheap European one of unknown make. Neither fold, but they do have one problem in common.

The long distance between the RH and the front beam.

I have short arms, so its not just how wide the loom is, but how deep the loom is that can become an issue if you want to manoeuvre a stick shuttle with ease, then change the position of the heddle without doing aerobic exercises. I cannot reach the back beam to wind on either, and this is on an 18 inch loom. I don't think plastic surgery or a diet would make much difference to how far I can stretch, ;-).

I wouldn't normally recommend embracing strange looms in public before you buy them, but the width and depth of the loom could be critical to ease of use and enjoyment, particularly if its clamped onto a stand.

Just another thing to take into account as you take the plunge.

 

 

Thumper70 (not verified)

I'm glad you mentioned the folding RH - I'd wondered if the problem you cite would be thus. The idea of portability is lovely but . . . . not convinced (grin).

Loominaria (not verified)

 I'm getting a Journey Loom for easy portability, and that should, I hope, be a solid frame each time it is assembled.  I may be drilling holes and inserting removable pegs on the Knitter's Loom, as frightening as the thought of me with a power tool is.

Kurt

PattyAnne (not verified)

I have three rigid heddle looms and I like EACH of them.   :)

I have a 20" Flip, a Cricket, and a Knitters Loom.

To me each loom has its advantages!

I use the direct warping method to warp these looms. Can you please tell me the advantages of winding the warp on the pegs because I have never tried that.

 

 

claudia (not verified)

Hi PattyAnne,

The direct warping method is great with a rigid heddle loom.  I prefer a warping mill or board because you can make longer warps and the accuracy is improved.  A good rh loom can hold up to 15 yards of warp, I think only about 7 on the Cricket and Knitters loom though.  I like longer warps because you only have to measure once and you make tons of variation with your weft.

It's all a matter of personal choice.

Claudia, loving the Kromski Harp 24"

PattyAnne (not verified)

Thanks!

Do you know how many yards the Flip can be warped with?

I guess the length of warp varies  with the type of yarn you're using, right?  You know... bulky vs 8/2?

When companies state how many yards their looms will hold, are they speaking of a certain weight yarn??

Thanks again.

PattyAnne, Loving her 20" Flip, her Cricket and her Knitters Loom all for different reasons.  :)   Hmmmm... wonder if I need to add a Harp? LOL

PS. The Flip comes with the second heddle block in place whereas you have to buy the blocks as an accessory for the Harp?  Am I reading this correctly? Also does the stand for the Harp fit all sizes as does the Schacht stand? 

Just a few questions as I continue to look around at the rigid heddle looms available.

claudia (not verified)

The length of the warp is dependent on the project planned.  One way to learn about this is to go to the Weaving calculator in the Resources section: http://www.weavolution.com/weaving-calculator and fill it out using a specific yarn and a project in mind. It gives you an idea of what you need to plan for projects, if you are a planner and I am. But, the other option is to put on a 7.5 or 8 yard warp and make scarves or table runners or whatever until the warp ends.

I use adding machine tape and measure the length of the project on the tape.  I pin the tape along one edge as I weave so I don't weave the project too long or too short.  For instance, the scarf I am finishing now I wanted to weave for 65" knowing it is 100% wool and I was planning on felling it a little once it is done so there will be some shrinkage.  I want it to be at least 60" before fringe.  I also measured every 5" so I could weave 5" plain weave alternating with 5" of lace pattern.

Hope that helps.  Yes, the second heddle kit is purchased.  I don't know if the stands are specific to the loom size.

Claudia

 

PattyAnne (not verified)

Thanks again!  You've been very helpful.  I will check out the link and also may begin using cash register tape.