francorios (not verified)

HEMSTITCHING FROM MY BLOG!



I'm hand hemming the ends with a fringe. I hem it on the loom because it is easier that way.

Here is a video that showed me how to hemstitch with the fringe.


hemstitch video
http://www.youtube.com/watch?v=NHBKqG2Do2I



Here is the almost finished towels. They still have to go through the washer and dryer to finish and shrink some.

PattyAnne (not verified)

Caroline,

I think you've solved my problem!

You tie on every half inch or so with FINE thread.  I tied on every....oh... 1 1/2 inces with the Peaches and Creme.  I figure my knots were just way too bulky.

Next time I will adjust the number of knots I tie thereby making each knot bump smaller!!

Thanks!

PattyAnne

Caroline (not verified)

Way to go Franco! Like your LH selvedges. Apparently there is always one side, that no matter how we concentrate on it, is difficult to get neat. I wonder if the secret is to ignore it and try and get into a regular beat? Anyone know?

sandeleh (not verified)

PattyAnne -  there is an easy fix for the lumps on your cloth beam from tying on.  Put a dowel slightly larger than the knots on the beam when you first wind on and it will smooth out the cloth beam for you.   If you have the kind of warp that needs to be tied onto the back apron rod (rather than having the rod slipped thru loops) you can do the same thing there.  Some larger looms have cutouts for the knots to lie in so you dont get those bumps in the cloth.

I have not found cardboard rolls from paper towels to be strong enough to withstand the tension of the cloth winding on.  I find mailing tubes to be quite a bit stronger and easy enough to cut using a serrated knife.  I guess PVC pipe is best for that sort of thing, but there are ways to minimize the size of your tie-on knots.

here is Peggy Osterkamp's tip of the month on lacing on.  http://www.weaving.cc/leasesticks/maytip.html   Say you tie an overhand knot in every 4 ends from the front of your warp, then lace the knots onto your front apron rod.  The knots will be small (only 4 ends) and they will flow across the whole front of your warp - making a very even layer of bumps.  Lace them on to your rod, then as you wind on and take the first turn around the beam, lay in another dowel that will let your cloth (or heading) roll right over the lumps of the knots. 

If you have time, read thru Peggy's tips.  They are worth their weight in gold and while you may not use all of them now on your RH loom, they will come in more than handy when you move up to a multi-shaft loom.  :)

Sande in Fresno, CA

PattyAnne (not verified)

Those are beautiful!!  I really wish I could zoom in on them!

I have a question.  Have you already hemstitched between the two towels or do you do that after cutting them apart?

Thanks,

PattyAnne

francorios (not verified)

Hi Sande,

What brand of yarn did you buy at Joann's? I never seem to find any interesting cotton worsted in 14 oz size there.

Have a good day!

francorios (not verified)

Thank you.

I put some links to a couple of the pics and the one in the middle I made bigger. I learned it is easiest to hemstitch on the loom before cutting it off.

I'm also learning that you should cut them apart before finish (wash/dry) or the long cloth can end up being tied around the washer agitator. Which is very agitating.

Have a good day!

PattyAnne (not verified)

I need to make sure I hemstitch while ON the loom next time for sure.

It is funny how each step helps me discover what NOT to do.... or to put it positively... I'm learning what TO do next time.

I am enjoying this WAL.  Thanks, Franco!

francorios (not verified)

I'm glad you are enjoying this WAL.

I'm also glad I took pictures and uploaded to my blog before I started this week. Me and the boys are going to have another talk about THEIR stuff and PAPA'S stuff.

Have a good day!

 

 

francorios (not verified)

This is one of my first warp stripe towels, made with a color called "Gumdrop" from Peaches & Creme.

Goto my blog to see bigger pics you can click to zoom in

http://francosfiberadventure.blogspot.com/2009/05/gumdrop-towels.html

 

http://rabbitgeek.com/loom/0420towel2med.jpg

 

This is another made by varying the warp stripes and using the same colored yarn as weft, alternating two of color, two of white. I think the color is P&C Shades Of Spring. It gives a kind of accidental plaid pattern.

francosfiberadventure.blogspot.com/2009/05/look-back-to-my-first-dishtowel.html

Take a variegated yarn like this P&C Shaded Denim and use it for warp and weft! More accidental patterns occur. I'm told this effect is called "pooling" and the effect can vary from piece to piece. I can buy cones of variegated cotton yarn from walmart (limted selection) or directly from P&C or Sugar and Cream for practically unlimited selection. These cones can be the source of very color infused towels like this, or the stripes can be used to pep up the white yarn base color.

Have a good day!