francorios (not verified)

Great job Janet!

Thank you for all the good pictures and information!

Have a good day!

Ellen (not verified)

Hi,Laverne

I have decided to experiment with doing this technique, two weft double weave, on a floor loom, using just two shafts. So far I have made a warp, set it up, and after some initial fumbling doing all rigt with weaving the black background. This is a fairly lengthy process in a fine yarn, so while I go I have time to think ahead. And have got this problem I can't figure out :  I had counted the pattern for the Abba Yohanni motif to about 80 wide, so I made a warp with the single thread sides and then 80 double warp-ends. Now I am thinking: When I get to the pattern, I'll be getting half of them raised in each shed, i.e. 40 pairs. Should I have made the warp twice as wide? Or do I just use half as many picked up ends  as in the pattern chart? My head is spinning with trying to imagine this ;-)

(ps I know it is preposterous to do something as advanced as this, but I had got it into my head that this would look great as pockets on the latest jacket I have made out of some fabric I wove this winter)

Ellen

Ellen (not verified)

Hi, Laverne, Thank you, I was afraid this was the case, when I tried to think of it once I had the warps between my fingers. You do speak "weaver-speak" ( I like the term:-) ), at least I understand what you are saying. I have got the grasp of the technique now after some fumbling, and it is just about possible to do this on a floor loom, if I choose a compromise tension, not as firm as I would do if I had to throw a shuttle through the shed, but firm enough to beat the yarn in. Don't ask me why I don't use a backstrap loom (grin), I guess I am just set in my weaver's ways.

Oh, well, back to the warping board, but I think I'll finish this bit with just the central figure in, anyway. Otherwise it will take ages before I get to make a new one, I have loads of projects lined up and will be off to my weaving retreat again soon!

I'll post it if it becomes "postworthy" :-)

Ellen

jordanj (not verified)

 I have been mulling over how one might take advantage of a 4 or 6 harness loom to make the sheds in the Andean Pebble Weave and have not yet figured it out. If you have Laverne, please share!

jeanne (not verified)

Wow!

Looking at what you're doing with the loom, I wondered about a couple of things for working on a floor loom. First, it might be possible to thread this up on the loom, and then instead of tying the warp to the front beam, tie it up to a backstrap instead- instant tension control!  Or, maybe controlling tension by placing a dowel between the back beam and warp beam, attaching it on both sides to a foot-control lever next to the treadles. Sorry, maybe that is too mechanic-speaky, but by pushing down on the lever with your feet, you could increase/decrease tension.

I've been thinking about that tension control thing a lot, since I'm quite spastic and need the mechanical help of a loom. I've also considered messing with a rigid-heddle loom that has a foldable hinge, and somehow using that hinge to change tension on the warp by changing the angle of the frame.

I hope this isn't too confusing! I'll go back to designing a Dial-a-Dent reed now!

What fun!

Jeanne

 

francorios (not verified)

Are those knots where you went over the bar once leaving a big loop and tied to the warp away from the bar?

Try going over the bar and tying off as close to the bar as possible, so the warp has no where to slide to.

Have a good day!

francorios (not verified)

Sitting and weaving on that monster must be like getting out of a sports car and climbing on a tractor.

Don't forget your seatbelt.

Have a good day!

mydogwidget (not verified)

 Hi, Laverne!

I'm working through the tutorials and I'm doing my first double-weave band.   I like the way it's turning out so far, but I'm not happy with the way the reverse side looks.   The "top" side looks good-- nice and neat, with more or less clean lines for the designs--but the reverse side looks rougher and not as refined.  Is this usual?  I thought the front and reverse sides would be mirror images in terms of the resulting quality of the weaving.  Am I doing something wrong?   I can get pictures for you later if you need them!

 

Widget

mydogwidget (not verified)

 Thanks!  I'll try this!   I must not be beating the lower layer enough.

 

Widget  :)

michelegirard (not verified)

From my beginner's point of vue right now, you're a genius Laverne :)