bibi (not verified)

 

patience... I'm on the way... it's coming... soon... lol

Michelle

claudia (not verified)

Congrats on the reopening Robin!

Claudia, co-founder Weavolution

RobinLynde (not verified)

 Saturday, September 12 from 10-3.
Grand Re-Opening of the Meridian Jacobs shop Many new products in stock! Visit with the new lambs born at the State Fair! Not only have we remodeled the shop, we are celebrating 10 years at Meridian Jacobs! So there will be 10 prizes  given out. There are three ways to get your name in the drawing--come out on the 12th, sign up on the home page to receive this newsletter by e-mail, or get your friend(s) to sign up for the newsletter. You will get one ticket for each friend who signs up (and they'll be in the drawing too). We hope that you'll bring your wheel or knitting or portable loom and spend the day with us.
Shop Open to Customers The shop will be open for your convenience every Thursday from 10 a.m. to 6 p.m. starting September 17. Please use the new entrance on the west. There is no gate to negotiate there!

http://www.meridianjacobs.com

nosila78 (not verified)

I used singles as weft in a collapse project, and it worked great.  The warp was Tofutsies, and the weft was shetland singles.  I was going to post a photo here but am not sure how to do it.  Anyway, if I stretch it to the full width, it is about 6" wide.  Relaxed, it is less than 3" wide.

cmtigger (not verified)

 I recently made something with an overactive merino tencel single as a pattern yarn.  It tried to collapse a little bit but I was able to block it out when wet finishing.  I think that the fact that there was a commercially spun tabby yarn, with a very stable twist, is what kept it from totally going wonky.

cmtigger (not verified)

 It was wonky because it was uneven and where I didn't want it.  If I had wanted it, it would have been neat.

dteaj (not verified)

Tina,

I've both spun and woven cotton cloth and done some work with overtwist yarns, so here's my 2 cents.

It really depends on how much twist you put into the cotton and how closely you sett and beat it. Cotton singles for weft can be spun just tightly enough to hold together well. For towels, that's probably about perfect, since you want the absorbancy that comes from the yarn not being too dense.

As the singles get to be higher twist, they will have a tendency to cause a collapse fabric, given enough room in the web to do so (that's the sett and beat part of the equation). A singles which twists tightly enough on itself to form a decent 2-ply, would be appropriate to use for collapse.

If you sett and beat tightly enough, no amount of twist short of outright corkscrewing is too much. The native people of South America have proven that pretty definitively. That produces a pretty stiff cloth though, and is not what you are going to be looking for in towels.

Debbie

Manicgirl (not verified)

Thanks for all your input. I don't want collapse fabric for my towels, so I'll try and spin a very loose cotton single (that will be a challenge!). And I'll do a sample, to see that I get what I want.

Thanks again!

Guiding Myth (not verified)

 I experimented with commercial (so it was evenly and softly spun) singles cotton weft with a warp of non-mercerized cotton.  It took about 5 inches of weaving to see that it didn't work for me.  What happened was the softly spun singles would grab the warp in odd places (not the fell)  resulting in loops of the singles yarn.  At the same time the yarn did twist in on itself causing additional frustration.  After wet finishing it did not collapse - but I did not intend to weave collapse fabric.  I was weaving towels also.  

I would ply the singles cotton before weaving with it. 

fantasticfelter (not verified)

well i must say i hate weaving a scarf on my 20" rh loom. i have a 13"emilia i love to weave scarves on , but the wider looms are not as much fun. my philosophy here is have a smaller loom for scarves and another on for other projects. i have a way i teach students to warp which helps with this, too wordy for me to go into but the biggest complaint i feel is the width of the larger heddle , and the extra bulk and weight seems to make it less stable to beat. it is doable but not as much fun, i agree and more work to keep the fell line straight.