Little Meadows (not verified)

Thanks for all those answers and giving me the blessings to continue changing tie-ups midstream - hopefully that has put any gremlins to rest again <G>.   As to the abrasion issues - on a sail boat we would shift the lines (ropes to the landlubber) a bit to keep the chafe from wearing on one spot, do you think that inching the cords forward or back  might be possible? It would be best if those cords could be done in a continuous loop but if that's not practical than it looks like extra at the end would allow that much more time before the entire cord had to be replaced.  Is there abrasion at the "peg board" too?

Liese

Susan Harvey (not verified)

Hi again!

I used to crew on a racing sail boat in the 1980's so understand the lines / rope and much more!  (Dad was in the Royal Navy)

No, the lines can't be moved as one part of the setting up process is to elevate the treadles to their optimum spot and then weight them to prevent movement upwards. You tug on the cords until all slack is out and then place the peg into the  'sweet spot"....then you mark that spot with a small tie of non slippery yarn. You do that for all tie up positions.

Using a continuous loop would fix this but be twice the cordage, and twice the cost. How would you get the 'end' through the hole in the peg board? How do you keep the sweet spot marked?  I have 384 cords on my loom which reflects the 12 shafts and 16 treadle tie up potentials.  So I don't think this would work, but good thinking!

Then once you are ready to do tie ups... all you do is pull the cord till the marker thread appears and slip in the peg.

That's it... you're done!

Now as for abrasion: My Gerude is 10 years old and I still have the original cordage on her. She gets lots  of regular use, but no rugs. There is some minor abrasion were the outer lamm cords run through small eyes on the outer sides of the loom. But they are still sound.

Texsolv is tough stuff!   But any tool, and a loom is a tool, and has moving parts, is subject to wear and tear and repairs and maintainence will be required. If you have ever been to any round robin workshops you will know. Someone inevitably brings a loom that  needs fixing up or is hard to work on as its worn out.

Cheerio, Susan

 

:) Susan

Little Meadows (not verified)

Ahoy!  Thanks for such an enlightning answer ... I'm beginning to understand this system much better for it.  Well if the coardage is still working after 10 years I'd guess the chafe/abrasion issues aren't really all that significant.  We had to change halyards every 3 years - but on a gaffer that's pretty typical - that upper yard is tough on things :)  Gads how I miss those days!  But back to weaving ....that set up you describe is quite an interesting process!  I've have to go do some more thinking upon it while I milk the girls ... take care,  Liese

Cheekyredhead (not verified)

I think your idea is a great start.  When I first began weaving a lot of my friends got dish towels as gifts.  The ones who cook really appriciated them.  Since you have a 4 harness you could have your study group add a repeat or two of a basic twill to add some interest to what might other wise just be plain weave.

jemwork (not verified)

In some of my early weaving classes, the instructor (AKA my weaving mother), used cotton rug warp for these early projects. This yarn is available in many colors, is very cheap & very forgiving. One she did was a bird's eye placemat of many colors. There might be 8 or 10 colors across the warp. We used one shuttle to weave them with a heavier weft - cotton Sugar'n Cream, which is available even at Joann's & other inexpensive retailors.

Placemats are a great way to make something useful & there are tons of 4H weaves out there that lend themselves to these projects. Learning how to do the figuring for weaving is a great next step to weaving. My "weaving mother" was a great proponant of this - learning to draft & thread is improtant to learning how things work together in weaving - getting into the mechanics!

Joan in Jamestown

Manicgirl (not verified)

Thank you for your comments. I like to tie up my loom with one treadle per shaft, so it's easy to switch between plain weave and twill, and was thinking that we might threadle the weave in birds eye pattern, because it's one of my favourites, and it really makes an interesting fabric that I think will appeal to many.

When vacations are over, I'll ask the people in my group if they like this idea, and hopefully we'll have a small study group when fall arrives.

Thanks again for your input.

Cheekyredhead (not verified)

You can get relatively inexpensive wooden shelves from some of the bigbox craft stores that have a row of pegs under the self.  I store my inkle loom on the shelf and use the pegs to hang hanks of yarn or a warp chain to keep it up out of the way of the cats.

greeneyedjrzgrl (not verified)

dtjacobson . . . .can I say that is AMAZING!!! Will you come organize my house? I don't think I could ever manage anything close to what you have accomplished there.

miafemme (not verified)

My suggestion would be a customized installation of  las vegas closets inside your room which has a complete variety of sizes and kinds, that will definitely fit almost all types of garment and looms that you have and for you to have a spacious working area.