anatcheva (not verified)

The linkage strips from AVL are cable ties (see picture below) that you can buy from the hardware store (I ordered a set myself from AVL not knowing at the time what they were and that they could be bought locally).

Unfortunately I don't know who now owns the loom I had. The person I sold it to has resold it.

Do you have the loom manual? I have an electronic copy (it's a bit hard to read) if you are interested.

cable ties

wwknitandspin (not verified)

 They have a new strip with holes in it.  They screw into the bars (up to 20 per strip).  they are to keep the spacing between the bars perfect.  http://shop.avlusa.com/parts/mechanical-dobby  Amazingly, a reasonable priced item from AVL.  Mine are being shipped.  I'll let the whole forum know if they are worth having

Thanks for the offer of the manual.  It took me months to find a copy through the internet.  I have a marginal scanned copy, but in the process of trying to find the bars, I found someone with a good copy that will scan me a good copy.

Thanks again for your help with my weaving project!

 

Kathleen

 

anatcheva (not verified)

Ah, seems I was thinking of the dobby chain ties the dobby linkage strips do look helpfull.

Good luck with your weaving.

stcroixweaving (not verified)

It makes it easier to thread onto the loom because we have 2 beams one above the other.

FybeRae (not verified)

Welcome Tri-Loomers!    Be sure to drop in at the group forum with an intro and to show us what you are working on...

One Long Thread forum area

You can't write a lot in this section, so grab your tea and meet me over at the forum! 

 

doreenmacl (not verified)

Come one, come all- weavers in Canada, unite to promote your passion for weaving!

frazzlehead (not verified)

I'll start! I was reading the introductions and saw that there are quite a few Canadian weavers here!

I'm Frazzlehead and I live on an acreage just outside of Edmonton, Alberta. I've been spinning for a couple of years now, and got a loom just this past winter. I have a Leclerc Tissart 2 harness (tapestry) loom on which I do ... well, plain weave, obviously, but that makes me happy all the same. I love how quickly a work progresses on the loom compared to, say, knitting, and I love being able to use my handspun yarns to make real fabric.

With life being so busy, I haven't got time to spare to go (physically) to the local fibre guild meetings, so virtual groups like this one help to fill the gap!

I'm actually going to Olds College Fibre Week next week (just for a day class) and very excited about it. I'll come back and tell you what I saw!

qcknitter (not verified)

 Hi there everyone!

I live in Trois-Rivieres, Quebec and I own 2 looms. A 45" Leclerc and a 60" Leclerc Myra. Both are 4-shaft. I am presently doing some tests to make a tablerunner as a Christmas gift for my sister-in-law. I will also be starting on cotton rugs within a few weeks.

I like to use the patterns at this website :

http://www.leclerclooms.com/pattern.htm

I also love the patterns in Handwoven magazine and on their website.

I'd like to make a small tablecloth for my mother-in-law for Christmas...but I'm having problems finding a simple 4-shaft pattern. Do any of you have any suggestions?

Can't wait to hear about other Canadian weavers... where they purchase their fiber, patterns, kits, looms, etc...

Carole

Virag (not verified)

Hi all, I'm greatly interested in Backstrap looms, ground looms, and interesting hybrids.  I am working on learning to weave on the ground loom and am working on learning to use a backstrap loom as well.  My thanks for the new group:>

Coolsticks (not verified)

Hi Virag,

I started weaving over 25 years ago on a backstrap loom I made from a rigid heddle.  I worked my way through most of Betty Davenport's "Textures and Patterns for the Rigid Heddle Loom" with it (borrowed from the library.)  Talk about weaving on the cheap!  The rigid heddle cost (new) less than $8.  Nowadays (cue little old lady music) these-here youngfolk gotta spend big bucks on fancy looms to weave.  (Pay no attention to that big-ol' loom behind the curtain!)  Anyhoo, you can do anything on a backstrap loom that can be done on a rigid heddle loom--great way to start (and keep)weaving, that's fer sher.

Never tried making my own string heddles, but I'd like to try.  What's your loom like?