DJCNOR (not verified)

And I'm in Norwich. You guys are close enough that I wonder if you would be interested in a project I'm working on. What I want to do is to establish a "textile incubator", a common workshop with a variety of equipment available for the members to use as members or renting by the hour. I want to include a loom that would be kept warped and ready for people who enjoy the weaving part and would like to make things for themselves but would rather avoid the warping part, the opportunity for students to learn weaving through one-on-one instruction at their convenience, a tourist-centered program that offered residential weekends with a combination of museum visits, lectures, and hands-on textile projects, and even a retail section where only UK yarns and fibers are offered, including handspuns, I hope. My ultimate objective is to revive the local textile industry. I'm hoping that the workshop will be a catalyst for the establishment of a number of new textile businesses that would coordinate colors and thus be able to market together. My problem, of course, is getting the initial funding and space to set it up. I have discovered a similar project set up by an artist called Smockshop that has indeed resulted in several participants setting up their own businesses, so I can show that my idea is likely to succeed. Anyone interested?

Donna

Holly Shaltz (not verified)

I have the use of an AVL 16 shaft 60" mechanical dobby loom, thanks to a friend who had to make room for her MIL.  I've only  used it 3 times so far--have a 30-yard warp of 8/2 unbleached cotton, 22" wide, on right now, threaded to a point twill, for napkins, table runners, and the like--some for gifts, some for a weaving group exchange, some to hopefully sell.

Because this loom isn't mine, I'm hesitant to spend money on it--my friend may want it back at any time, though I suspect I'll have it for a few years yet.  It's reconditioned from the mid 80s--86 I think, though I'm not sure without looking it up.  It has a sectional beam with 2" sections, which deters me from fine warps.  I have to borrow bobbins to fill, or make some (I've used toilet paper rolls, which actually work quite well), to be able to use even my standard 8/2 cotton.

Holly

lisack (not verified)

Hi all,

I bought my AVL 16H loom in 1992.  I wove a lot at that time and since then life has gotten in the way.  I have recently been working my way through Bonnie Inoyue's book about multishaft design.  I got stuck on the network drafting chapter so then I bought Alice Schlein's book...so I'm set for summer weaving which for me will start in 4 days when school is out!! 

I love to weave clothing weight cloth. I dye warps, wefts or do shibori to get color effects as well as weave effects.

I'd love to hear what other people are doing with their looms!!

Lisa in Frederick, MD

suehelmken (not verified)

Hi Lisa,

Are you a member of the Potomac Craftsmen guild?  I'm in VA, but I met Bonnie at some of the meetings and got her book.  I do shibori and clothing, too.  I got a 60" LeClerc Colonial, used, with 12 shafts and flying shuttle.  I figured LeClerc could help me, but no such luck.  They don't deal with mechanical dobby systems any more and wouldn't/couldn't even give me a place to look for parts.  I'm getting by with what I have, but I'd really like to have another set of bars and straps [have lots of pegs] so I don't have to re-set them every time.

 

Sue Helmken

www.barefootweaver.com

 

suehelmken (not verified)

Hi Holly

I use a sectional beam, too.  When I'm using finer yarns, I run 2" sections on my warping board and put them directly on the warp beam.  It works well for 12-15 yd warps, but I think it would be too hard to control the tension on 30yds.  I wonder if sections of pvc pipe would work if you could glue bits of cheap carpet or rough cloth on them for friction.

Sue Helmken

KokoSam (not verified)

Hi Everyone,

I have an 8 shaft Mecchia dobby loom 60" wide. Mecchia is from New Zealand and is in beautiful native woods. It takes up nearly 5cubic feet in my studio!!!  I am just about to start winding a very fine (32epi) cotton and rayon stripped warp. The rayon catches on everything there is to catch on!!.  I have only had this loom a couple of years and haven't had too many warps on it.  I am just trying to get used to the dobby system.

Cheers Judy

pilcrowlit (not verified)

 I'm Carol, and I joined this group because I own a 22-shaft dobby made by John Bettencourt. I haven't had it long, and haven't had the courage to warp it yet, so I'm hoping to get support, encouragement and ideas from everybody else. I have six other looms, my favorite of which is an 8-shaft countermarche, but I really want to get the Bettencourt going.

Cheryl Muckenfuss (not verified)

Hi,

I'm Cheryl and I have a 36" 12 shaft AVL made in the early 80's.  I also have my friend's 48"  16 shaft AVL production dobby loom.  I would really be pleased to locate dobby bars for the 12 shaft 36" loom.  I have only seen two other looms like it for sale in the last 10 years or so.  It is a nifty little loom.

lisack (not verified)

Wow Sue! Your work is so beautiful!

I love the dyeing process and Shibori is wonderful because it gives a structure to the dyeing process.  Have you ever done woven Shibori?  I have not yet, but hope to someday.

What are you having trouble with on your LeClerc? Maybe people on this forum could help.

I have been a member of Potomac Craftsmen and may join again as I weave more.

Bonnie has always been very forthcoming with help and inspiration.  I didn't mean to imply that Bonnie's book was the problem....it is that I am having a hard time understanding the structure of network drafting. 

 

Lisa

wwknitandspin (not verified)

 Hi Cheryl,  

How nice to find someone else with the same loom.

I have the same 12 shaft loom and the same problem of not enough bars.  I'm trying to locate them through the internet (which would be the fastest way), but also trying to get AVL to make some.  They don't have the specs any more, so I'm FAXing them the measurements and tracings of mine.  If there are two of us, maybe we can get a better deal.  Do you by any chance have the original manual.  I have a marginal copy, and could use reprints of a couple pages.  

Kathleen