Sue Pierce (not verified)

Hi i have been weaving for about 12 years I love learning about my craft and of course hints are wonderful the hint I use the most is when I am tieng onto the front beamjwhen doing the final tighting of the knots I will start in the middle of the warp tighten about 3-4 on either side of the center knot thenuse the front brake and tighten it by 1-2 notches.

continue tieing the knots tighting the front brake

doing this keeps the tension the same across the warp without the retieing of knowts

sue

Alaire Rieffel (not verified)

Get a tie-up kit from Vavstuga--the kind that uses texsolv and knitting needles.  It makes tying up a breeze!  Now my biggest tie up problem is getting back up off the floor (arthritis and all...).  Hopefully I can train my grandchildren to do it for me someday.

deb turner (not verified)

Glad to be part of this group - Hi, Laura. We're always learning - I change methods of warping all the time and am always getting better. After 22 years I should hope so. Now I always warp with tension - I hang full large water bootles from S hooks in an overhand knot. 2 for wide warps and 1 for narrow. Periodic "tugging" in 2" groups helps. I also agree that Peggy Osterkamp is a great source for info.

Ludmilla (not verified)

I have been weaving for about 3 years but I am quite adventurous and have done a lot of different types of weaving. However, I work 2 jobs and fit in weaving whenever I can. I have warped btf and sectionally and am always looking for ways to both speed up the process and eliminate errors. I am always learning and am hoping this group can keep me learning new things.

Nancy

fireflytex (not verified)

Perpetual-beginner weaver needs advice on assigning treadles --

I can't figure out how to start a thread, so I'm not sure where this will appear.

I am preparing to weave a 4H pattern requiring only 4 treadles (no tabby needed) on an 8H loom with 10 treadles. It seems easier to reach the treadles in the middle, but perhaps easier to hit the right treadle using the outside ones. What's the best approach?

Deanna (not verified)

When I only need a few of the treadles.  I pick the ones that are where my feet fit the best.  Usually for four treadle patterns, I skip the center two and use the next two on each side off the center ones.  My legs and feet fit there well and it is comfortable for me to weave.

Deanna

Deanna (not verified)

How do you keep the tools that you need to use close to the loom.  I have been thinking of a basket, bucket, a tied roll, or a plastic carrier.  I have looms in several different rooms and I want to have the tools I need by the loom and not floating between places.  I hate to have to stop to go find the needed tool.  I do keep the warping tools with the warping board and they only appear at the loom when needed, but there are several items that are needed repeatedly and I want to have them at the loom in a tidy way.

Also how do you take the tools to a workshop/class?  What do you take, do you have a special device to hold them?

Deanna

Deanna (not verified)

My new tool

Some months ago on weave tech, a weaver found some great paper clips in a japanese office supply store to hold the heddles back  so they don't walk to the weaving heddles.  I have not Japanese office supply close and decided to roam the office stores to find something...I did.  A great paper clip.  It's called "Supaclip" by a company called Rapesco.  I found it in Office Depo.

Its like the bullnose paper holders, but without the handles to open them and it's very small.  I comes with a dispenser to put them on and they just fit the metal heddle rods on my looms.  They are easily put on with the despenser and come off just as easily.  They are reusuable, you just relear the dispenser and put them on again.

I will try to get a picture of the package and the clips in use.  (I need a little direction from my computer helper to get pictures on.)

Deanna

Lodi_Weaver (not verified)

I have a small rolling cart next to my loom.  It has a couple of wire drawers that I use to hold shuttles and bobbins/pirns.  There are also two shelves that I can stack other items on so they are close at hand.

I also have a magnet on the castle that I use to hold pins, scissors, etc. for ease of reach.  I can also use it with a small metal clip I got at the hardware store for holding my draft & notes as I weave.

I haven't really done any workshops so I can't speak so much to that.  I would probably use a small plastic storage tub and just try to organize things in there as best I could.  A cheap plastic tool box or tackle box might work well if you find one large enough to hold shuttles below and the little separated sections for holding your sundries.

loomweaver03 (not verified)

I use Lee Valley magnetic paint brush holders

http://www.leevalley.com/garden/page.aspx?c=1&p=60019&cat=2,42194,40727

They will clip onto a harness to hold scissors or reed hook while threading; or onto my bench to hold scissors, pins, needle for hemstitching,a pen, etc. while weaving. The only draw-back is that they don't open as wide as I'd like, limiting their use to clipping onto narrower things.