Helvetican (not verified)

This morning I spent two hours making a backstrap loom from the kitchen rack shown below.  I had already disassembled before thinking to get the camera but I have loosely placed the pieces back in order.

The next pic shows the disassembled parts.

 

This one shows all of the backstrap parts, some additional pieces that are destined to become a 12" rigid hedde and most of the parts for a medieval box loom.  The frames to the little doors will be heddle frames for the box loom, but could also be used with the backstrap.  The little birdhouses will be either discarded or used as warp weights for warp weighted weaving.

The three rods 7/8" dia by 14" are the back, front, and roll-up bars.  They came complete with grooves around the end and nothing needed done to them.  The two bars that held the serrated cutting edges are the shuttle stick and heddle stick.  I used the drill shown at top to drill a few holes in the heddle stick and shed bar.  I cut the widest shelf piece into two pieces for the shed bar - I prefer a flat bar, otherwise I could have used the piece I'm using as a shuttle stick - and for the sword.  The sword took the most time, tools and effort to make.  I used the pocket knife to roughly shape the ends and sharp edge, then the wood rasp to refine the shape, followed by sanding.  The shelf cost fifty cents at a yard sale, and the total time spent was under two hours.

francorios (not verified)

After seeing Norene's beautiful shuttles made from a yardstick on her blog here, I remembered I need some more shuttles. But not having much time, I knocked out some quick and easy shuttles with wooden rulers bought from the dollar store.

Using a small hacksaw, I cut a Vee shaped notch in each end of the ruler.

 

Then I sanded and smoothed all the edges using sandpaper wrapped around another ruler.

That was it, it was easy, it was quick. But not as pretty as Norene's.

Have a good day!

esmecat (not verified)

very cool! when i get back from a trip this week, i'm going to be making some. i need more shuttles!

Little Meadows (not verified)

Wow!  Isn't that a generous offer, I'd certainly like a the information.  Liese

bev_ryn (not verified)

Were you able to find the attachment? I uploaded it, but can't see it. Maybe I don't know where to look. I can email it to you.

Bev

Little Meadows (not verified)

Hi Bev,  Doesn't seem to have come thru,  would you email it to me at [email protected]?  Thanks for going to all the trouble!  Liese

Susan Harvey (not verified)

Just posted in the other same title topic.... please read there about rear mounted tie up assist....

 

Susan

marywareodc (not verified)

Hi

That is really neat.  I weave on a 4 shaft table loom but would love to do simple looms like this as well, especially for samples and experiments.  Thanks.

francorios (not verified)

I didn't proof read well enough the first time.

I plied some wool on the charkha for use as WARP!

And Charkha is what they call the little box spinning wheels in India. Charka means wheel. A charkha can also be an upright wheel that looks more like a traditional spinning wheel.

Okay, enough for now.

Have a good day!

 

Caroline (not verified)

What Franco is too modest to tell you is that this idea was taken up by some small independant schools so that they could teach fibre crafts and spinning to their students. It made the subject affordable.

My upright charkha is made of PVC and a wheel-chair wheel, but was commercially made. If you use half inch furniture grade pipe, its plenty strong enough for wheels and inkle looms.

There are instructions for a large pvc wool wheel here - the text is almost unreadable in Firefox, but the photos are self-explanetary:

www.pjsadventures.com/DragonsKeep/personal/PVCWheel.html

There are instructions for a wheel here:

www.angelfire.com/journal2/donisfuff/booklets.html

And this lady built a beauty too:

rosemaryknits.blogspot.com/2008/08/my-new-wheel.html

If you Google "pvc spinning wheel", then switch to the images, at the bottom of the first page you will find a pvc weaving loom.

Happy hunting!