Hello Weavers!

My warping board is a Leclerc and is 1 meter wide. Most North American patterns discuss warp requirements in yards. I know the difference between the two (3.5"). Up till now, and having not done a big project yet such as a blanket or really long warp for many towels, etc. I have wound my warps based on yards, but using a board that measures meters - so the reality is, I'm wasting materials with every project. The good news is I have a warping mill on the way that measures yards, but my kids will be using the warping board for their projects. Is anyone else in this situation and do you actually sit down and do the conversion between meters and yards before winding your warp to save materials, or do you consider the difference so small, why bother? Jest curious!

Thanks in advance!

Comments

Liese (not verified)

After designing & calculating total length needed  in yards and inches for a warp I measure that off on a guide string.  So even tho I too have a LeClerc board, I still get the exact length I want and don't have to do any metric/yards conversion.  Now sometimes I can't find a configuration just right for the string length in which case I just go a wee bit longer -'cause we all know longer is always better!

Liese

tien (not verified)

I would consider the difference a great opportunity to experiment (aka sample) with "leftover" warp.  Try different colors ,different wefts, different treadling...you'll learn a lot with that "wasted" warp, believe me!  it's not a waste at all. 

laurafry

I wind my warps in meters and as Tien suggested use that bit extra to sample - different colours, different yarns, different weave structures. 

cheers,

Laura

woolgirl (not verified)

Liese, that's a great method you use to make the conversion without having to figure anything else out!

Tien and Laura, I feel like I'm having a V-8 moment, smacking myself on the forehead, because of course sampling is a brilliant idea and I have so much to learn! I have 3 looms warped and going right now, all with extra warp and I am going to try everything I can think of trying on them. One obvious thing on the rayon chenille warp would be simply to try the pink scarf colors across the blue/green warps. And lots of possibilities on the tea towel warps! I'm really glad I decided to ask this- it seemed like a stupid question, but your replies have been great.

Thanks a million Ladies ;)

Sara von Tresckow

One yard is 0.9 meter. That is easier to visusalize than 3.5" difference.

Just do your warps knowing that your 10% takeup is already included.

I never cease to be amazed at how people cannot move from one system to the other. The main measurements - pound, yard and quart are all 0.9 the metric equivalent. For cooking, it doesn't really matter if you put a pound (454g) or a half kilogram(500g) ground meat in the spaghetti sauce.

Also, any dress pattern I've purchased in the last several years has both meters and yards on the back of the envelope.

And FYI - for those who consider themselves "math challenged", there are no fractions to convert in metric - you simply slide the decimal to the right or left when changing from one unit to another.

Karren K. Brito

454g, which is one pound, is 45.4% of a kilogram.

Sara von Tresckow

Karren, I saie HALF a kilo which is 500g. Please read the comments.

woolgirl (not verified)

Thanks for your reply Sara! I was a knitwear (garment) pattern writer for years, and everything had to be in both cm/in, gm/oz, so I am comfortable going back and forth, but I was wondering if anyone actually bothered to. That said, I have never thought of a one yard equivalent as .9 meters - that is brilliant! I'm an American, so those darn inches are engrained in me. So 6 yards is 6 x .9 = 5.4m -- talk about easy! OR just allowing the extra 10% to become the take up is something I never would have thought of! Wow, great, great tips Sara!!! Thank you again! ;)

Matt (not verified)

Another corollary to Sara's comment is useful when buying linen or cotolin in 250g packages. Since 500g is a little more than a pound as mentioned above, the 250g packages are a little over half a pound. Useful when you are used to buying cones of yarn in pounds, and you don't want to convert yd/lb to m/kg. And when you buy yarn this way you'll of course end up with some extra yarn leftover (like with the warp).

kerstinfroberg

and... as a yard is almost a meter, ans a pound is almost half a kilogram, then, for a quick estimate, halve (divide by 2) the meters/kilo to get the yards/pound...

Math is magic, isn't it?

woolgirl (not verified)

Those are great points, Matt and Kersten! I agree, math is indeed magical! It's right up there with fiber arts and the internet in my mind! lol My two fav subjects in school were math and art :)

Andy_SA

I tend to work things out in inches and yards, mainly because I'm old fashioned!I went to school in England in the 70's. We were taught both imperial and metric, but daily life revolved around the imperial system. Bit different nowadays. Either way, it's easy to convert, so the maths just depends on where the yarn's come from.

woolgirl (not verified)

Yes, me too Andy - I own rulars, yard sticks and tape measures - I'm an inches and feet kind of gal ;) I've been up here in Canada for over 2 decades, and the one metric conversion I cannot get used to is km to miles (1km = .62 miles). Wish there was an easy trick for that one. If I know how far away something is in miles, I can visualize it, feel it, know exactly how long it will take me to drive there. Km...? Forget it, I'm lost. But I digress... back to weaving...

Andy_SA

Easy: 1km = 5/8mile, therefore km to miles is "times 5, divided by 8"; miles to km is "times 8, divided by 5". I'm sort of converted to metric, except when it comes to weaving and clothing sizes (and homemade wine). Luckily, shops down under are used to people like me!

As for the yardstick, I always that was a form of punishment...

woolgirl (not verified)

OK, that works! :D

Actually I use my yard stick mostly to fish things out from between the washer and dryer! For punishment, we have a 'repentance' bench. The two offenders sit side by side and aren't allowed off until they can tell me what *they*, not the other kid, did wrong.

Neshobe (not verified)

Karren wrote that 454g, which is one pound, is 45.4% of a kilogram, which is correct. It sounded to me like Karren was simply adding an observation. 

Neshobe (not verified)


I learned both systems. But I THINK in each one, and rarely translate, though the equations are also part of my brain. I find each useful for different things. For instance, I use metric when dyeing, but inches and yards when weaving. Also when building something. Reason is that you have to figure out the measurements, and I've found it is actually easier to avoid errors in measurement as a result. Accounting systems build in redundencies to catch errors, and pharmacists do too, because there is a high rate of errors with grams alone. It is easy to miscalculate when you move a decimal point and forget, or mistakenly move it too far. Some measurements can be off and it won't matter much. Others need to be more precise. I think what you use and how you do it depends on the situation, what you are trying to do, and what works most intuitively for you. (I almost never measure when I am cooking-- the amounts are so ingrained I don't even have to think about it.)

LOL- I measured my height with my tape measure the other day. It came out 152.4 cm. The other side said exactly five feet. Five feet it is.

Submitted by Anonymous (not verified) on