What makes the best choice for a new or used loom for sampling and classes?  

Table loom or small floor model?

What size is best?  How many shafts?  Floor stand or not?

Is the Ashford the only one with Texsolv and overhead beater?

I welcome all comments and advice!

Comments

theresasc

I use Kessenich table looms with stand.  They fold and travel well completely dressed, the loom is heavy enough with strong tension to weave a very firm rug sample with Jason Collingwood with no hassles.  I have also taken my Kessenich for crackle and lace classes at MAFA and had wonderful results.  I have never had equipment or tension issues with these looms.  The only drawback is that I had an 8-shaft, 25" model and it was extremely heavy to carry - it is all solid oak.  The 20" 8-shaft is much easier to cart around.  I prefer 8 shafts, I find it to be versatile enough for what I do.  For sampling , I prefer using my smaller floor looms, which are also Kessenich - you can probably notice a theme here.  These are all solid biult looms made to be woven on with no hassles, my kind of loom!

 

Eileen Crawford

Thanks for making some good points on the ideal sampling and class loom.  I'll have to look up this company, as I've not seen this manufacturer before.

I am intested in flexibility, ease of use and handling

sally orgren

from 20 years of workshops — it depends on how far you typically travel for the workshop experience.

If you have to take a plane (and need to use a suitcase), the fold-up LeClerc Voyagers are terrific, and they come with a variety of shaft counts and in a few widths. (But they not so great if you are focusing on rug weaving workshops and need very tight tension.)

The Schacht Baby Wolf also seems to be very common and in round robins they seem to be the preferred loom to weave on. Many weavers I know can handle transporting them solo. Having the stroller attachment helps to transport it when it is folded up. A really great all-around loom for home or workshops. They won't fit in a sedan, but do fit in SUV's and Toyota Prius.

Watch the length/width of table loom frames. Any table loom that does not fold up and has a long frame will give you a better shed, but might be too unwieldy for you to carry easily, especially through doorways. (Ask me how I know. I sold that one to someone who wasn't going to travel with it. ;-)  

15-20" width would be good for sampling. (Many workshop teachers provide warp instructions in the 8-15" range because they know a lot of students won't have workshop looms wider than that.)

Consider the overall weight of the loom. The more shafts you add, the heavier the castle becomes. Table looms seem to fall into the 25-40 pound range. If you can't easily lift that much weight to place a loom onto a table, that should be a serious consideration. 

One of my friends takes the subway to workshops. So she has a Louet Jane for high portability and low(er) weight. (Yes, it has Texsolv heddles and an overhead beater). 

And you definitely want to invest in a good luggage cart to haul a table loom from the car to the classroom. The Voyager and the Jane come with shoulder/tote bags, but if you had to carry them more than a block with that mode, you'd really be wishing you had a cart!

So, what kind of workshops will you be taking?

And what kinds of things do you like to weave?

Eileen Crawford

You've given me much to consider.  Thanks for taking the time to share your thoughts.  I have plans to attend Convergence in Providence, RI this July, and thought I'd better prepare for the potential learning opportunities.  

I'm interested in making many samples and want to be able to weave lace to rugs. I weave on a 47" Toika countermarch 8 shaft loom at home.  Does it make sense to have a portable loom with the same number of shafts?  

sally orgren

 

That's a great idea. Sampling on a table loom of 8 shafts won't always be apples-to-apples to your floor loom (you may have to adjust sett when you move to the floor loom for longer and wider yardage). But if you got a Baby Wolf or similar, that would be a lot closer to your Toika. 

I am not a fan of overhanging beaters on table looms, so if you can try one before buying, I'd recommend that. The mechanics of the overhanging beater works great for floor looms, but on table looms the size and way you beat is different, so I am not sure you have the advantages that you might with a floor loom. (I forgot to mention the Voyager comes with an overhang option.)

Frankly, wanting to weave rugs on a portable loom is the sticking point. Your floor loom is best for that. Any smaller loom or table loom will let you try patterning and general technique, but for "real" rug projects, IMHO not so much. 
 


I say this because I have taken the Collingwood rug workhop with a Voyager, my warp "sprung" twice (I had to clamp into a locked position) and trying the shaft-switching with his technique didn't work because of the way the castle is sealed on top of the loom for the levers. (A LeClerc Dorothy or table loom with an open top and side levers was perfectly fine.) However I knew a workaround, so I was good. But if I didn't, that would have been frustrating.

 



 

 


I am planning to attend Convergence too! What workshop have you applied for?

 

sally orgren

You know, you can typically rent or borrow looms when taking workshops at conferences. This is a bit tricky because you are unsure of what kind of loom you might be getting at the last minute. But that eliminates the need for a folding loom that must fit in a suitcase, and for a speciality workshop (like weaving rugs or with wire) you will (hopefully) get a loaner-loom well-suited to the task.

(Sorry, the formatting had a mind of its own in my last post.)

theresasc

l took a workshop with Jason Collinwood and had no troubles weaving my workshop sample.  I wove it on my Kessenich table loom.  It was a large class, 20+ weavers on a huge variety of looms.  My sample was the firmest one, including what was on a Baby Wolf.  I would never weave a rug on this loom, but samples for trying color and structure, you bet.  The loom has metal ratches on both beams, and 3 locations for the beater.  

Eileen Crawford

I just printed the class and workshop schedule today, and am filtering through the opportunities.  

Have you made your choices yet?  

 

Eileen Crawford

The sturdy nature of the loom is appealing.  I definitely don't care about using the loom for weaving pieces, rugs or otherwise.  It is for small sampling and portability.  There are some key features to consider, and you've helped me to think about tension and weight.  

I wish that I could try several for the right fit.  

Dena (not verified)

I don't see any reason why you shouldn't try a bunch of looms before making your decision.  Convergence is seven months away.  Why not make a list of everything you are considering and check in with local(ish)guilds to see who has which loom.  I am happy to let you try anything that I've got and I'm sure others would also.

Submitted by Eileen Crawford on