I've been using 8/2 and 8/4 cotton to make weaving recently, but when I wash the weavings the colors alwasy bleed.  I usually hand wash my weavings with dishsoap in cold water.  My red and white weaving, became a red and pink weaving after I washed it.  How do I prevent this?  I tried putting vinegar in the wash, and that kind of helped, but not totally. 

Comments

sally orgren

Toss them in the wash. Use lots if you suspect the color will give you trouble. The sheets collect the dye that is suspended in the water, keeping it from reattaching to the fiber. You can find them in the laundry section of the grocery store in the US. 

Also, watch the dryer. Drying slow might not be your best bet. One of our guildmates commented that her fabric came out of the washer ok, but the dye then bleed when she left it out to air dry.

Anyone else have suggestions?

kerstinfroberg

Have you tried HOT water?

When I was a child, someone taught me to always use hot water (as in almost boiling) for the first wash of everything cotton - especially where there were reds. It was said that was because of the dyeing procedures. It sort of made sense to my young mind, and I have been doing it like that ever since.

Dyeing procedures (and dyes) may have changed, but cotton should survive hot wash. (Shrinkage will happen regardless of water temperature, but it will take longer/more washes, in cold water.)

Catweaver

After I dye fabric or yarn, I soak it in synthrapol - works like a detergent apparently - that stops colour bleeding really well. Perhaps it would work in this case, too? The info I found on retayne says to soak before you dye and use synthrapol afterwards, but I have no experience with it. Hot water can help with cottons dyed with fibre-reactive dyes like procion (which is just about all the cotton you buy) - it helps fix the dye to the fibre - but is even better with the synthrapol.

laurafry

Fugitive dye molecules need to be rinsed out as quickly as possible. Never just soak, but rinse, rinse, rinse until the fugitive dye is gone....if you can find color catchers they will trap the loose dye molecules and prevent them from resettling elsewhere on your cloth. Cheers Laura Who always uses hot water for wet finishing cotton...

Dawn McCarthy

I wash in warm/hot water with Synthrapol and for blacks/reds add a color catcher.  I keep the fabric moving and rinse under flowing water.  The synthrapol suspends excess dye and this with the color catcher seems to work really well.

Dawn

bewove.com

 

Joanne Hall

You might take note of where you purchased those threads and then purchase from a different source.  Good quality threads should not give you so much bleeding of the colors.

Joanne

Heather26

Wow such great info!  Thanks everyone!  I'll give your ideas a try!

sally orgren

And consider taking the yarn in question "out of circulation" so your fellow weaver's don't ruin their projects unknowingly. Maybe toss into the "Yarn Bombing" bin, or the "Glue-around-a-soup-can-for-a-pencil-holder" project bag.

Submitted by Heather26 on