I have a floor loom that I love but am thinking of adding a rigid heddle loom to the collection. I want to be able to do samples without having to put a large warp on the floor loom. I also want to beable to weave with it in my lap. In the research I have done so far I see where you can use a RH in your lap but most of the videos I have seen, they are bracing it against a table. I wouldn't beable to do that and wondered if you really have to? I know that if I did get one, it would have to be at least 24 inches wide and have the ablility to add an additional heddle. Can someone give me some advice? Thanks for all your help!! Right now I am leaning to a kromski harp. 

Thanks again!

 

 

Jane

Comments

JacRoyce

There are also rigid heddle table looms, as well as rigid heddle looms that you can get stands for so that you don't have to use a table edge. If you really want it in your lap, you'll be using your belly to steady it on the cloth beam side, but you need something to stabilize the warp beam side. I've used lots of different things for the warp beam edge, including tv trays and lap desks. One thing I like is to sit on the couch with my back against one arm and my legs on the couch; set a lap desk over my knees; and 'hook' the warp beam on the edge of the desk. This position also makes my cat very happy: she sits on my ankles. 

Good luck,

Jac 

HarpStrings

I have a 24" Kromski Harp, and in my opinion, trying to weave with the loom on your lap with no other support is quite unwieldy, and I believe this w/b true of any loom of this size. An arrangement such as JacRoyce described *might* work, but I suspect that would depend on the loom's width; 24" might be too wide to work with that way. I don't have a good table to prop my loom against, and have no room to add another table, so I bought the stand for the Harp, and that has worked out quite well. The stand has a very slim profile and if you turn the legs sideways you can slide it under a bed when not in use. And the Harp itself can be folded with a warp on (as can some, but not all, other rigid heddle looms). Of course, you could always start with just the loom & see how it goes, then add the stand if you need it. Good luck!

Jane Greer

thanks for the comments. I was wondering, with the stand, will it fit up under a chair, like a TV tray? 

Submitted by Jane Greer on