missbeckyohh43 (not verified)

Can anyone tell me if this is a jack loom?  or can be made into a jack loom?

jabberpaws (not verified)

For showing off my loom here I keep forgeting this forum is here!

jlread (not verified)

Hi Dawn....a while back I sent a mail off to Tom B. from LeClerc concerning why they didn't manufacture a double box any longer...He said there were too many problems with them....If you get one made....great...I would like to do a fly shuttle for my AVL...any ideas??    Judy

Liz Gipson (not verified)

I can't really speak to your questions as I have yet to teach my first class.  What I'm supposing is that we need to keep the information to golden nuggets.  I agree that this is a great opportunity to reach new weavers.Liz

Amelia Garripoli (not verified)

I checked out camera angles and views before starting each class to make sure they could see what they needed to. My classes so far have all been Rigid Heddle, so I used a small loom that I could pick up and hold in front of the camera if I needed to. I'd likely use a table loom for any traditional weaving, unless it was a class specific to using a floor loom.

It's hard to be successful if you or your students have unreliable internet connections or old software/cameras. Though you may think they don't need a camera, it's the student without one that runs into issues you can't fix without seeing what they've done wrong.

I also made a point of providing full notes on the same material covered in class so they could continue between classes (or after) with those to jog their memory -- my students remarked they liked that a lot.

 

ruthlisbeth (not verified)

 

Underlig kanske man kan kalla solvnotan, men utan att veta något om gamla amerikanska solvnotor antar jag att man börjar solva partiet där siffran ett står och sen står antalet genomsolvningar på det andra skaftet. En riktigt bra idé tycker jag så länge det inte är fler än två trådar som ska upprepas. Frågan är hur det ser ut om man i ett annat fall skriver 1,2,3,7  och alltså menar att trådarna ska solvas i ordningen 1,2,3,7, sju gånger. Utrymmesbesparande blir det utan tvekan.

På orginalnotan står 46 (trådpar antar jag) repeat, jag tycker din solvnota är bättre.

I boken Daldräll som var orsak till att vi öppnade den här gruppen finns bara partimönster så att var och en själv får/måste göra sin solvnota.

Bra tycker jag!

Gott nytt år!

 

ruthlisbeth (not verified)

Jag tror fortfarande på två trådar eftersom två trådar krävs för att ett mönster ska bildas och varför skriva 1,2 i solvnotan när 1,1 tar lika stor plats?

Gott nytt år!

ruthlisbeth (not verified)

Du har så rätt.

Jag kan konstatera att det inte är enkelt att förenkla och ändå bli förstådd.

Och så kallade förenklade drällar är inte alls enkla.

ruthmacgregor (not verified)

Hi Jeannine,

A 9 mm dowel is very comfortable in the hand, and it's a nice size if you're planning on holding the spindle in your hand as you spin.  It's a good size for people who are just learning to use spindles, too.  ...An 8 mm dowel has the same "comfort" features.

When I make spindles to sell (inexpensive ones!), I use either a 9mm or 8mm size dowel.

A thinner dowel, on the other hand, has the advantage of letting you store more yarn on the spindle before the spindle becomes "full".  You don't want to go very-very thin, because then the shaft will be fragile; but 5mm or bigger should work just fine.

The kind of wood that the doweling is made of will affect the weight of the spindle (which seems obvious, but I sure didn't think much about that until it confronted me!) -- and interestingly, it has a subtle effect on the way the spindle spins, too.  I haven't figured out exactly how that happens (or how to use the information to get what I want), I just know I've seen it.

The whorls your woodworker friend made look great!  How big are they?

Ruth