steve104c (not verified)

Claudia,Caroline, I have two Rigby Cutters, model B's. They are the single blade. Your cutter Caludia has a multi cutter roller and and single blade cutter. You can use either one. It's a nice cutter. The Co. is still around and will sharpen blades but $$$$$. You can sharpen them yourself. I have, and with very good results. Be careful not to tight down the roller too much , just when there is a slight resistance on the wing nut. It takes a little time to get use to feeding the fabric. Once you get the hang of it you will enjoy it. I made a stand for mine so I can use it when I'm sitting on the sofa watching tv. I can send you info. on how to sharpen and a pic. of the stand I made............Steve. PS Your cutter new would go for well over $200.00.

dyeing2weave (not verified)

The short answer is yes; the longer answer is I'm not sure if it's the dye take-up or the way the light reflects off of different wools so it appears that the dye take up is different.  That would require a control test.  I have found the fleece appears to be lighter than spun wool and loosely spun wool is lighter than tightly spun wool.  Long staple worsted spun seems to be the darkest; short staple woolen spun the least.  But then Mohair locks will get very dark.  I used to think that it was because there were more dye sites available on fleece so if you added more alum; you might get a darker color.  It may also be that the light reflects differently, and it's an illusion.  Sheep breeders probably have more of a handle on the difference between 'goat hair' - mohair - and sheep hair.  Alpaca is also hard to dye dark - I think because of the hollow core.  I would be interested in other people's experiences.  I keep thinking it would be worth doing a control experiment varying the alum, dye, and sheep breed.

mamaladka (not verified)

Yes - also in my experience. I use mainly the wool of the Slovenian native sheep breed "jezersko-solčavska ovca" which is medium coarse and sometimes the "pramenka" from the island Cres in the Adriatic sea which is very coarse. The coarser one takes colour in a lesser extent than the finer one: I even dyed the two in the same pot for the same time and premordanted together.

dteaj (not verified)

Thanks for sharing that, Marie. Very interesting!

dteaj (not verified)

Along similar lines of future technology, two physicists just won the Nobel Prize for a very thin (one atom thick) sheet of carbon, among the properties of which is conductivity...

dteaj (not verified)

I haven't done this, but my approach would be to get the sett right on a single weave piece of cloth, then double it for the double weave.

I'm not sure about the weft faced sett, perhaps 2/3 - 1/2 of the typical sett to start? With your warp, the typical sett would be 5 epi, so maybe 3 for the single weave? That would leave you with 1-2 epi for the double weave. I would definitely try this out to make sure it works. I've never heard of anyone using a sett that wide.

I hope someone with more experience answers. Perhaps the rag-rug group can help you get the single weave part right.

 

 

 

miri37 (not verified)

Thank you dteaj, Sara and Laura for your help and - it now seems to me - saving me from a "disaster". I wasn't aware of the problem of achieving an even beat in both layers of a double weave, let alone when a weft-faced weave demands an even more strict uniformity in beating. Apparently, this is a much larger bite than I can chew at this stage of my weaving, so I think I will take Laura's advice and weave two panels and then join them together.

passapman (not verified)

This was  one of my first questions when I began shopping for a loom.

The guidance I received from numerous sources is condensed below with thanks to all who generously shared.

1) A weft faced rug is HEAVY! Even if you succeed in maintaining an even beat on both layers, and even selvages, and hide the fold line in the center you still have to wind this double width rug onto the cloth beam, which creates the following problem:turn of the cloth. As it wraps around the take up beam, the under layer is going to be of smaller diameter than the outer layer, and as you keep weaving and keep wrapping the layers are going to distort diagonally, no matter how perfectly matched they were as they started around the cloth beam. In sewing lightweight fabrics, turn of the cloth is of almost no consequence. When sewing coats and jackets out of melton and camel hair, and the like, it becomes a very big deal in managing seam allowances.

2) A rug that large is going to be difficult to handle and finish, to say nothing of dragging it to shows, and shipping to the eventual purchaser (if any)

3) If you are really serious about weaving rugs that wide, consider getting a 63" weaving width loom, with draw in you could approach 60" finished width, 54" for sure, possibly 58-59"

4) Weave a border at the start and finish of the rug, then weave two side borders simultaneously and cut them apart. The border will hide the seam. The only critical seam areas will be the border-to-border seams top and bottom.  But a 58" to 59" rug is pretty big. Certainly enough to make a bold design statement even in a very, very large room. If you absolutelty had to make a larger room size rug, you could make four 5' x 9' rugs and sew them together, that would yield a 10' x 18'  Can't imagine doing that, but it would still be easier than doing a double width thick weft face rug. Once I had experienced weavers help me think it through, I decided 5' x 9' is the largest rug I would ever weave, and probably not too many of those. I have seen so many beautiful rugs 36" wide and less. At a certain point the surface becomes more than the eye can take in and appreciate. As an interior designer I can tell you that most accent rugs are certainly less than 45" wide, with most of them below a width of 36.  28" to 32" wide is the most common. Good luck with whatever you decide to weave.

Passapman a.k.a. Robert

telaranha (not verified)

Eladio,

Muy lindo y bien hecho tu tejido.

Saludos

Helena

 

 

graciela (not verified)

Stunning color and beautiful design.

Impactante color y bello diseño. Bravo Eladio! Saludos. Graciela