missbeckyohh43 (not verified)

Where did you find your 400 grit sandpaper? That sure sounds fine.

sarahnopp (not verified)

You should be able to find 400 grit at art supply shops, or any hardware store that sells finishing quality wood. I would imagine Home Depot has it. I bought mine at a local hardware store. There is finer grit available too- for fine metals, I found it 600 or higher.

EDIT-
My brother makes guitars and he uses extremely fine grit sandpaper. 400 grit is coarse for him. He was telling me about a micro-fiber polisher/burnisher too. So apparently wherever they sell materials for making musical instruments has nice fine grit polishers :)

missbeckyohh43 (not verified)

that helps. I have found fine sand paper and have made my own knitting needles - but I didn't use such fineness as 400 grit. This gives me more ideas that I can find somethign so fine.

I picked up a paint stick at our local hardware store, but I find the wood to week or soft, and sometimes as I am beating quite hard, it bends a little (hasn't broke yet). So, I am wanting some harder materials.

ruthmacgregor (not verified)

On the same line as belt shuttles sold for inkle weaving -- I've started sanding a sharp beveled edge on one side of regular stick shuttles, and it works beautifully!  I weave a lot of bands, but lately I've been weaving wider bands -- and a stick shuttle with a beveled edge makes an excellent beater!  After inserting a weft pick, open the next shed, insert the shuttle, and pivot its beveled edge up and down against the fell line to pack in the weft.

Most of my weaving is with rigid heddles of one kind or another, but I never use the heddles themselves to beat the weaving.  It started as a personal taste (it seemed unkind to the heddle!), but it's become something I really like, because it lets you use whatever heddle you have to weave any width you want (even warp-faced bands), and the selvedge threads don't suffer from extra wear.

We all develop our own quirks as we go along -- and one of mine is that all my stick shuttles now have beveled edges. ;-)

Ruth

dyeing2weave (not verified)

There is a table on this www site of % - http://tablerockllamas.com/instructions.html#1 - I think there are other places that have some of the % as well.  There is a booklet by Michele Wipplinger that also has dye information for extracts -  http://www.earthues.com/.   You didn't say what you were trying to dye so the % may vary if it is cellulose.  You don't need to soak the logwood overnight; just mix it with hot water.  The % is 1.25 - 2%.  Good luck

Diane

 

 

jemwork (not verified)

Those were very helpful links. I think they answered most questions & I will let you know how things turn out. I'm working with wool yarn this summer.

How do you think extracts compare to using the original dye stuff? While they are pricier, I guess they must be more concentrated & dye more. Quicker to use as well.

Joan

dyeing2weave (not verified)

I am actually giving a talk on this topic at the natural dye conference in Taos next week so could be lengthy about it but I'll keep it brief.  I have not seen recent cost studies on extracts but one place that did a comparison found them less expensive than plant/animal material.  If you take into account the time involved in growing .... if that's what you are doing they may be a lot less expensive but you cannot get everything as an extract - the native rabbitbrush around here is a good example.  You do lose the satisfaction of growing your own dye materials.  In some cases the extracts do not give as 'potent' a color as the plant/animal material.  Cochineal, logwood, and walnut are the ones that come to mind.  They are easier to use and you use less heat source as you don't have to extract the dye before dyeing with it.  You can combine them easily to make other colors and you can paint with them which is not as easy to do with raw materials.  And you can get repeatibility as long as it's from the same 'lot' as the dye stuffs do change over time.  I'd be interested to see what other people have to say about it.

I forgot the maiwa's www site in my previous post - they are starting to put up some nice natural dye guides.  I think it's www.maiwa.com.  The other issue relative to extracts that I didn't mention is that there is some concern about the ecological issues related to extracts as far as whether or not the extracts come from endangered species and/or how environmentally friendly the extraction process is.  The reputable extract companies have researched this but it's something to consider. 

dyeing2weave (not verified)

I checked with table rock llamas, my extract supplier, www.tablerockllamas.com - all of their extracts are either GOTS certified or have an organic certification in the country of origin.  Organic certifications vary but it's nice to see the industry moving in that direction.  Karren - thanks for pictures of your work - it's beautiful. 

jemwork (not verified)

You feel you need to mordant between applications? I haven't read that in dye books, but then I haven't NOT read that. Perhaps its right sometimes: I did have some dyes that didn't overdye so well, but I had others that did. Let me check my notes.

 

jemwork (not verified)

Those are good points about too much mordanting. I did some over-dyeing on both commercially dyes rug wool (some colors came out, others ran) and my own dyes (worked better in most instances). Haven't tried doing alum over. Those commercial dyed yarns changed in the alum too.