francorios (not verified)

Hi Claudia - I have done pieces that wide before. The difference was they were not as long and could be warped on a frame. This one I used upright sticks for warping that were not as sturdy so I did not get the tension even.

I am going to get some wood to assemble a longer warping frame.

Alison - Thank you for the encouragement.

Have a good day!

claudia (not verified)

Jordan, you tease, I was hoping for a link when I came here.  Now I will go test the search box and see if it shows up.

Claudia

PS-found it, just put Mud Cloth in the search box and choose Project.  It's the only one that shows up.  Great project.

jordanj (not verified)

I thought I had put the link in, but it was late and I didn't test.... sorry. The link is there now. I really like the "edit" tab! :-)

claudia (not verified)

Good finishing techniques are essential, no matter what the source.     Although not required, a sense of humor is always greatly appreciated.

Claudia

lkautio (not verified)

If you try using this yarn as warp again, you could size it, ply it with a stronger thread if you spin, use it only as weft with a stronger warp, or (my preference) run it with a strong fine thread such as sewing thread or 60/2 silk so that each heddle has a fine and a sari thread. On the fly, you can sometimes use white glue to repair a broken end (let it dry before returning to weave). It is pretty and looks worth trying again. cheers, Laurie Autio

April Mae (not verified)

Laurie,

Thanks for the ideas.  Using the Sari Silk as a warp seemed like a good idea and a way to tone down some of the wild colors by having them stripe lengthwise rather than double across each other as a weft on a narrow warp.  One thing which would have helped would have been using a reed with less dents per inch - like a 6 dent.  Maybe I'll try again one of these days.

April

Caroline (not verified)

If you are a spinner, or felter, you can re-use those precious silk threads either by carding them and re-spinning them, or adding them to felted projects. I have used softly spun sari silk as weft, and love it, but spinning my own I do get a chance to tone down the colours and can keep a colour sequence going for a while.

tien (not verified)

My AVL Workshop Dobby Loom has heat-shrink tubing over the cables, extending very slightly down over the hooks (put on by the previous owner).  This prevents the hooks from flying off, and reduces the incidence of cables catching on things, but does make it more difficult to remove the the shaft from the cable.  I think it's worth it, you might want to give it a try.

jordanj (not verified)

Thanks to both for your suggestions. Laura, I do periodically push the extra heddles on the ends of the shafts (there are not very many) towards the center as I know this has caused problems in the past. This time this was not the issue - I need to do some more problem solving and the shrink tubing sounds like a good idea.

 

jordanj (not verified)

Good point, Laura. I'll check that out too.