Aunt Janet (not verified)

You can also work it wet.  That will also eliminate dust.  Works with shell carving as well.  So if you want to drill a hole in a shell or sharpen a bone, just keep them wet while working on them.  If wet doesn't work well on the bone, my apologies, please use a dust mask.

Evelyn (not verified)

The llama bones must be very dense.  I was wondering how a deer antler might do. 

claudia (not verified)

That sounds very doable (is that a real word?) and I will try it next.

About the drawloom.  I saw a picture recently and it looked like a Glimakra Standard with a different structure on top where I now have the countermarche jacks.  Is that correct?  Then, it's the same depth as the Glimakra Standard, right?

Claudia

claudia (not verified)

Thanks Joanne.  I did figure out about removing the long cords and the ones at the bottom of the shafts.  I wasn't bright enough to figure out to mark the cords so I could put them back in the same spot.  Live and learn.

I am truly enjoying the loom and am so happy I bought it.  I can sit and weave without discomfort for 30-40 minutes and then have to remember to get up and stretch.  It's such a difference from before.  It's nice to have found the right loom.

I am fascinated with the drawloom and hope to visit Cheryl's soon.  I missed the group meeting at her home.

Claudia

kimberley (not verified)

thank you, my other secret hobby is trying to learn how to use my camera!

i did notice one downside to using an upright loom, with the warps under constant tension, the patterns get a stretched out look. i have switched to a backstrap now and love the ability to control the tension :)

ellenspn (not verified)

I'm planning on making the backstrap first, but I have have your pebble weave tutorial as well.

I'm going to Stitches Midwest this weekend so I was wanting to pick something up while I'm there :)

Thanks!

ellenspn (not verified)

Didn't find  any of the above, but I did find some cotton yarn from Greece.  Butterfly  Super 10.  It's a cabled yarn and mercerized so should work just fine.

Webs didn't bring any Cotton Classic with them.

Thanks everyone!

jordanj (not verified)

I have been home sick for the last 2 days - no energy for the big looms, but a Andean Pebbleweave on the inkle loom was just the ticket. I am happy that I didn't forget much of what I had learned from Lavern's book after a summer of practically no weaving.

jordanj (not verified)

Jolly colors took more energy than I had. I tried two different combinations and then took the warps off. The color thing is hard for me! This green and brown warp was my daughter's choice for a key fob I promised months ago. 

This is the first time I've tried Aunt Lydia's No. 3 and it's great! And since it's so cheap, I feel I can be generous in the trial and error department.

claudia (not verified)

Can you tell us where you found the pattern?  It might help to be able to decipher it if I can see the whole pattern.

Is there a tie-up in the corner of the draft?   Most draft have 4 parts, the threading (which is usually the bottom or top line) the treadling (which is usually on the right side) and the tie-up (which is at the bottom or top corner) and the drawdown which is the center portion of the draft.  Like this:
 The tie-up at the bottom corner, tells you which treadles are tied together and when treadling you would follow the row on the right side of the draft so the treadle 1 brings up (or down) shafts 4 and 1 and treadle 2 controls shafts 3 and 4 , treadle 3 controls shafts 2 and 3 and treadle 4 controls shaft 1 and 2.  

Rugs are often woven on 2 shaft looms so treadle 1 might control shaft 1 and treadle 2 would control shaft 2.  Then, your pattern would be indicating that you raise shaft 1 twice and shaft 2 twice.  If that is the case, be certain to wrap the shuttle around an edge thread before returning it to the shed for the 2nd time so it has something to secure it.

Hope this helps,
Claudia