Caroline (not verified)

The first sari silk yarn I came across, and then spun myself was very harsh on the hands when trying to crochet it! The silk fibres were quite straight. I now sell sari silks, and have some lovely soft sari fibres just perfect for spinning. I run them through a picker, card the fibres to break them up even more, then spindle spin them so the twist only just holds together. This results in a much softer and finer yarn than the commercial yarns - or my first attempts, lol!

I'm experimenting with adding lengths of very fine gauge copper wire to the yarn, as there is often gold or silver threads in among the sari silks from brocades. As this is not intended for a garment, but for a bag, I don't have to worry if the wire is a bit harsh but so far I can't feel it its so soft, and the flash of copper complements the sari silks beautifully.

The little bag I'm weaving at the moment is from recycled Thai silk, and the texture, colour and feel is quite different, but its still very tactile. I love it when things just come together like this!

Caroline (not verified)

The first sari silk yarn I came across, and then spun myself was very harsh on the hands when trying to crochet it! The silk fibres were quite straight. I now sell sari silks, and have some lovely soft sari fibres just perfect for spinning. I run them through a picker, card the fibres to break them up even more, then spindle spin them so the twist only just holds together. This results in a much softer and finer yarn than the commercial yarns - or my first attempts, lol!

I'm experimenting with adding lengths of very fine gauge copper wire to the yarn, as there is often gold or silver threads in among the sari silks from brocades. As this is not intended for a garment, but for a bag, I don't have to worry if the wire is a bit harsh but so far I can't feel it its so soft, and the flash of copper complements the sari silks beautifully.

The little bag I'm weaving at the moment is from recycled Thai silk, and the texture, colour and feel is quite different, but its still very tactile. I love it when things just come together like this!

claudia (not verified)

How about posting the picture here and then let everyone know the details are on your project page. The one thing we worked very hard at was making it basically easy to add pictures on Weavolution. Your idea about linking your project to a post is a good one, I'll add it to our development suggestions for the future. Thanks for Joining the Weavolution. Claudia, Weavolution co-founder

claudia (not verified)

How about posting the picture here and then let everyone know the details are on your project page. The one thing we worked very hard at was making it basically easy to add pictures on Weavolution. Your idea about linking your project to a post is a good one, I'll add it to our development suggestions for the future. Thanks for Joining the Weavolution. Claudia, Weavolution co-founder

francorios (not verified)

Washcloth01

Weaving a washcloth on a frameloom

This is an almost finished washcloth done on a frame loom.
http://rabbitgeek.com/loom/washcloth01.jpg

My chopstick loom has evolved.
Still using the craft frame as frame for the loom. The chopsticks have
been replaced by 1/4 oak dowels. The piece on the frame was planned to
be 12 inch square. The bottom edge is 12". The top edge is 10-1/2".
There was some pull in as I worked my way up.

This time I used a
twined edge cords for top and bottom edges. Makes a better looking
finish edge than my previous experiment. If you look closely at the top
edge, you'll see where I remembered to weave around pairs of warp for
four rows. I'll have to experiment with more pairs like that.

I
tried to do edge cords on the sides but this did not come out as well.
I'll be playing with that more in the future. I like the look but I
missed a lot of picks while trying to weave in the side cords.

The weave looks open on the loom, but it tightens up nicely after wet finishing,
which is a trip through the washer and dryer.

The yarn is Peaches & Creme worsted cotton, White for the warp and Shades Of
Spring for the weft.

Have a good day!
Franco Rios

My blog Franco's Fiber Adventure
http://francosfiberadventure.blogspot.com/

francorios (not verified)

Washcloth01

Weaving a washcloth on a frameloom

This is an almost finished washcloth done on a frame loom.
http://rabbitgeek.com/loom/washcloth01.jpg

My chopstick loom has evolved.
Still using the craft frame as frame for the loom. The chopsticks have
been replaced by 1/4 oak dowels. The piece on the frame was planned to
be 12 inch square. The bottom edge is 12". The top edge is 10-1/2".
There was some pull in as I worked my way up.

This time I used a
twined edge cords for top and bottom edges. Makes a better looking
finish edge than my previous experiment. If you look closely at the top
edge, you'll see where I remembered to weave around pairs of warp for
four rows. I'll have to experiment with more pairs like that.

I
tried to do edge cords on the sides but this did not come out as well.
I'll be playing with that more in the future. I like the look but I
missed a lot of picks while trying to weave in the side cords.

The weave looks open on the loom, but it tightens up nicely after wet finishing,
which is a trip through the washer and dryer.

The yarn is Peaches & Creme worsted cotton, White for the warp and Shades Of
Spring for the weft.

Have a good day!
Franco Rios

My blog Franco's Fiber Adventure
http://francosfiberadventure.blogspot.com/

Caroline (not verified)

Yes, doesn't the twined cord does give a nice edge! I've tried it on selvedge, unsuccessfully. I wonder if the secret is to go forward one way, then back the other way, to stop it winding around itself and getting so tangled? A couple of the descriptions I've read about it just said to periodically untangle it, but that implies that the twined warp threads are not actually joined to the frame at the top.

Caroline (not verified)

Yes, doesn't the twined cord does give a nice edge! I've tried it on selvedge, unsuccessfully. I wonder if the secret is to go forward one way, then back the other way, to stop it winding around itself and getting so tangled? A couple of the descriptions I've read about it just said to periodically untangle it, but that implies that the twined warp threads are not actually joined to the frame at the top.