Evelyn (not verified)

Dye pot #2

I followed the instructions with mordanted and unmordanted yarns alternating in the dye pot. 

http://evelynoldroyd.wordpress.com/2010/07/14/natural-dyeing-with-hypericum-perforatum-part-ii/

Helvetican (not verified)

I love them, and they look great together!  Isn't it amazing what you can do with only one plant.  Will be interested in seeing what happens to the unmordanted ones after you do the colorfast test.  I am crossing my fingers for you.

Helvetican (not verified)

My next door neighbor is logging.  Today being Saturday and the loggers not working, I took my helper and went to see what I would find.

What I found was both bark and leaves of the following:  Sassafras, wild black cherry, red maple, tulip poplar, rhododendron, holly, autumn olive.  Gruetli (pronounced greetly), willingly pulled the cartload of treasure back to the house, where I put it on the roof to dry.  Some will need to be used right away, while some can be dried for later use when I'm not so busy.

I have used all of these before except for the holly and autumn olive.  I checked online to see what I could find.  Nothing on the holly.  According to one site, autumn olive, an introduced invasive species, was originally brought to the colonies as a textile dye plant.  Nothing on what color it might yield, so I will be experimenting with these.  Does anyone have any experience with either?

Helvetican (not verified)

The tree id is the simple part for me.  It's a cultural and environmental thing.  When I was a small child we had to know several species of trees before we even started school.  Not just to identify them, but in the course of everyday life, like:  "Run up to the woodshed and bring me a few sticks of that locust (or hickory)" or "Go fetch me some poplar (or sassafras, or soft maple) or "Go cut a hickory switch."  and many other such directives.  We were expected to be able to do it unassisted, and we were well instructed in the different properties of each wood.  And I live in the center of the most diverse forest on the planet.  There are more species of trees in my backyard than in all of Europe!  However, using plants for dying was limited to a very small number of plants.

Evelyn (not verified)

The colour from the chestnut is amazing!  What percentage do you use for the alum mordant?  Do you use cream of tartar as well? 

I see in Wild  Colour by Jenny Dean that she used to use the mixture and on her website that she is now using just a slightly higher percentage of alum with no cream of tartar. 

There is birch on my property and one has come down in a wind so I will collect some of that bark.  Does it have to be used fresh to get the red tones?

 

Helvetican (not verified)

Thanks.  The yarn had been pre-mordanted some time ago, but my usual rule of thumb is to use 1 1/2 Tbs. of alum for each 4 oz. skein that I'm mordanting.  Yes I did use cream of tartar, only one tsp. added to the dye pot, and 1/4 c. salt.  The bark, along with the leaves from the branch had been sitting in a bucket of water from my spring, since just after the storm in mid-June.  When the innner bark of a tree is exposed to the air it will begin to develop color and darken, and when it sits and ferments the color will develop even more.  If you cook it up right away you won't get as much color.  As least this has been my experience.

The most color is obtained from bark on the main trunk of the tree.  Twigs and small stems don't give as much.  I don't know what kind of birch you have, but the two I have used in the past are Black birch, also called sweet birch, and yellow birch, also called river birch.  I've never dyed with white birch.  If you add some leaves of the black birch to the pot of bark that you're soaking, you can get a very dark, almost black color.  The yellow birch I've done was a much lighter yellow brown.  Both black and yellow birch smell like wintergreen.

Among the stuff I collected yesterday was a large piece of quite rotten red maple bark.  (The pieces shown on the roof at the lower far right.  Since I thought it seemed ready to go, I soaked it overnight and cooked it up this morning.  I got a medium brown that doesn't have the purplish color I usually get from maple bark.  I'll post a picture for you tomorrow.  The other barks I collected, are now sitting in containers of water outside.  These need to have lids to keep mosquito larvae out!  I cooked up the sassafras, rhododendron, and holly leaves.  I always throw in a small bit of yarn when I'm cooking to see what is happening.  Sassafras looks like a brownish lt. green, rhododendron is looking neon yellow, and the holly leaves aren't looking very promising.  I'm going to let it sit for a few days and see what happens.

Just a thought:  I've always wondered if the purples from maple bark are actually from the lichens that are often covering the lower trunk of the trees.

Evelyn (not verified)

The birch here is white birch i think,  so no doubt the lighter range of colour.

Lots of maple around here so I will be giving that a try.  Interesting observation about the lichens, I guess you would have to scrape it off or find some without to do a test.

I also have a Burr Oak ( white oak family)  in the back yard and it needs a couple of large lower branches cut off so will be able to try both leaves and bark.    I see a few different colours can be had with and without mordant.  

Are you using cream of tartar from a grocery or a chemist's supply?

I am looking forward to trying this - might run out of undyed yarn before i am done!  Do you ever overdye natural gray wool?

 

Helvetican (not verified)

I found one source that said white birch would give brown.  It didn't state light or dark.  Any oak will produce dye.  My common local ones are white oak, red oak, and chestnut oak.  I use the cream of tartar from the grocery store. I have over-dyed gray wool.  It's more interesting if your gray is mostly light with some darker streaks.  I don't do this much.  Do you spin?  Sometimes I like to ply two different yarns together and then dye them.  Just watch out for the fibers that won't take the dye.  You could also ply wool of two different colors and then dye.

Helvetican (not verified)

I just looked at your profile to see where you were located and looked at your blog.  You do lovely work!  And I see that you do spin.

Helvetican (not verified)

What is your recommended amount of alum sulfate per lb.?  And thank you for being so giving of your expertise.