Outbackspinner (not verified)

Hi Everyone, I see I am a month late making my introduction.  I forget to get on the computer to check what is going on.  My name is Paula and I live in Kalgoorlie WA.

I am originally from West Virginia in the US.  I learned to crochet, knit and spin by the time I was 15 in WV.  At seventeen I learned to weave in Grenoble France, by accident, from a nice lady named Martine Cheradame.  I didn't have the chance to weave again until many years later and had to take a beginning weaving class to learn how in english!!!

When I moved to Australia I had to leave my looms behind so I have done a lot of knitting in the last 10 years.  Last year I had a chance to buy two looms.  One is an old four harness table loom from Petlin.  The other is a very large four harness counterbalance loom made of Jarrah.  Now I have the looms I keep hoping for time to do more weaving.  But I am still busy working.  I have one project on the table loom and a rug warp chained off waiting to be threaded on the floor loom.  I move at a snails pace!

I do a lot of mental weaving before I fall asleep at night!  In the past I spun a lot of the wool that I used to weave with even though people told me that you couldn't use handspun for warp.  the results were all good.  My only disaster was a mohair warp that kept breaking, but it wasn't handspun, it was machine spun.  I really enjoy twills and overshot.

I look forward to hearing from all of you and stories of your weaving journeys.

MegWeaves (not verified)

Never too late.  My dad a word for mental weaving - which he claims Mom does more of.  But don't we all?

 

Meg

MegWeaves (not verified)

Never too late.  My dad a word for mental weaving - which he claims Mom does more of.  But don't we all?

 

Meg

Vicki Allen (not verified)

I would like to join your group. I have enjoyed the blogs written by many of you and admire your work already. I am located in Georgia, USA.

I weave on an 8 shaft Maycomber jack loom and a homemade counterbalance 4 shaft loom. I have been weaving since the 80's. Since I work full time, my weaving time is limited, but like others have mentioned, I weave pretty much all the time in my head. (What was that word your Dad had for that, Meg?) : )

I'm learning summer and winter right now and experimenting with different possibilities using that weave. It is fun.

Thanks,

Vicki Allen

 

Lodi_Weaver (not verified)

 I just alternate the side of the loom that I tie-up on.  So for my current project, which uses 8 treadles, I have 1-3-5-7 on the left side, and 8-6-4-2 on the other.

Because of the sequence I'm currently using, I just kept them in "order".  There are times when I tie up so I can just treadle from outside to inside, alternating sides as I do it.  Not every sequence works well for that though.

I hope that make sense.

 

Lodi_Weaver (not verified)

 I just alternate the side of the loom that I tie-up on.  So for my current project, which uses 8 treadles, I have 1-3-5-7 on the left side, and 8-6-4-2 on the other.

Because of the sequence I'm currently using, I just kept them in "order".  There are times when I tie up so I can just treadle from outside to inside, alternating sides as I do it.  Not every sequence works well for that though.

I hope that make sense.

 

amyfibre (not verified)

I prefer to set up my treadles in a "walking order" for the structure I'm weaving....ie. left, right, left, right, left right.  Not always possible, but that's my ideal.

The most useful tool that I have found for achieving this is the shaft shuffling functionality in Fiberworks PCW (for newbies, that's the weaving software that I use).

I design the draft with visually logical treadling, but before I print out the tie-up/treadling and go to the loom, I rearrange the treadles.

For example, if it's a straight treadling on 10 treadles, I rearrange from:

1  2  3  4  5  6  7  8  9  10

to

1  6  2  7  3  8  4  9  2  10

or, as in the case of the summer & winter I am weaving right now:

1  2  for tabby

5 - 10 for pattern

nothing on 3 4

Sometimes it's a bit tricky to figure out what's the most efficient (and logical) way to rearrange....then I start by sitting at the loom and scratching some notes on what "feels" right, but then I eventually go back to the computer and rearrange the treadles in the draft to make sure I get the tie-up right.

Hope this makes sense.

amyfibre (not verified)

I prefer to set up my treadles in a "walking order" for the structure I'm weaving....ie. left, right, left, right, left right.  Not always possible, but that's my ideal.

The most useful tool that I have found for achieving this is the shaft shuffling functionality in Fiberworks PCW (for newbies, that's the weaving software that I use).

I design the draft with visually logical treadling, but before I print out the tie-up/treadling and go to the loom, I rearrange the treadles.

For example, if it's a straight treadling on 10 treadles, I rearrange from:

1  2  3  4  5  6  7  8  9  10

to

1  6  2  7  3  8  4  9  2  10

or, as in the case of the summer & winter I am weaving right now:

1  2  for tabby

5 - 10 for pattern

nothing on 3 4

Sometimes it's a bit tricky to figure out what's the most efficient (and logical) way to rearrange....then I start by sitting at the loom and scratching some notes on what "feels" right, but then I eventually go back to the computer and rearrange the treadles in the draft to make sure I get the tie-up right.

Hope this makes sense.

hlf (not verified)

I admit, I'm scared of trying anything that isn't a straight 1-10, left to right!  I haven't been weaving long enough to have encountered efficiency challenges.  But perhaps on my next project...

hlf (not verified)

I admit, I'm scared of trying anything that isn't a straight 1-10, left to right!  I haven't been weaving long enough to have encountered efficiency challenges.  But perhaps on my next project...