rose Goldielocks (not verified)

The best thing you can do is to put together a frame loom, or best yet a backstrap loom! and WEAVE,. and WEAVE, and WEAVE! Claudia answered the question best as far as a 'textbook' answer that you will get from most any teaching weaver. (I got a similar answer when I asked at my guild)

Read all you can, looking at the definitions in books. The best begginer "stand alone" book is Rachel Brown's book, "the dyeing spining, weaving book" or something like that... the title has all those words in it.

As for sett, For a backstrap, it is important to know what it is, and to be able to measure it if you really want to, or to talk to another weaver so they can duplicate your work (or vise versa). For practical everyday use, just do it so it 'looks right'. I only worry about sett if I am actually using a reed to weave with... (and.. I belive laverene is in the same place of mind.)

I have lots and lots of bands with an "hourglass" waist where I was checking to see which sett (or weaving width) I liked best. I start out by scrunching the yarns close together on my loom end, or on the poppscicle sticks I am using as a header, I weave 5-6 picks, (throws of the weft).... then pull the weft really tight, weaving again 5-6 picks, then gradually loosing how much I pull the weft tight untill I get the width that 'looks good' and leave it at that to finish the band. Generally when I am done, I cut the section of 'hourglass waste" off and throw it in a bag to save a sample to look at later...  weeks or years latter! In a perfect world, you would print out or write out a sheet that has the draft, attach a few of your warp and weft  yarns to the sheet, the sample you wove and stick it in a loose leaf binder. But... I am not perfect.

I did a project on sett here: look at the difference between the two bands. The only thing differnt is the color of the weft (one I used the white border yarn, the other I used the orange border yarn.) (this is the wave sampler on my projects page)

http://www.weavolution.com/node/8993

Any questions on building what you need, PM me... I have built most everything I use for next to nothing.. and can give you some pointers on which is worthwhile, and which is best purchaced.

Sharon

Cindy Jo (not verified)

Thank you so very much for your response! Looks like I have found a home on the internet that is more than willing to help out someone who is just beginning. Thank you all so much.

Cindy Jo

Cindy Jo (not verified)

I am extremely interested in Navajo weaving! Although the more I read, the more I want to do each kind of weaving. Thank you very much for the links, Franco.

Cindy Jo

Caroline (not verified)

Cindy Jo, did you understand better what is meant by sett? Claudia and I have started a thread on the subject on the Weaving101 forum,  here:

www.weavolution.com/node/9245

Its not usually a subject that gets much mention in books about smaller looms. For some reason many writers seem to think rigid heddlers, Navajo and backstrap weavers don't need to worry about it, but unless you are only going to be weaving narrow bands, its something we all need to know about.

If you have any more questions like that, go and ask away as lots of the more experienced members of Weavo are happy to help new weavers out, and have lots of valuable knowledge to share with the rest of us.

sequel (not verified)

Wow, I always intended to make a jig like this to hold the raddle and lease sticks.  I'm glad somebody did it!

I make my raddles with whatever nice smooth straight stick presents itself.  I use a drill press to drill the holes, but I'm too lazy to file the heads off the nails or cut dowels as you have.  I just poke the nails into the wood and tap them in so they are all, or mostly all, the same height. 

I make lease sticks from screen door spline and round over the edges that aren't already rounded over.  To get them really smooth, I sand them, then mist them to raise the grain.  When dry, repeat this using progressively finer abrasives.  I usually use polyurethane varnish and smooth that with 0000 steel wool for a really smooth lease stick.

 

Erica Tiedemann (not verified)

Thank you, Deb!

I'm trying to figure out how to put a raddle on my old 60" cranbrook.

It looks like the raddle raises the warp above the level of the back beam.  Does that have any adverse effects?

-Erica

 

 

Erica Tiedemann (not verified)

Thank you both Sara and Deb,

I started weaving with a friend who left the raddle on -- or maybe it was just the leas sticks.  She had several looms and a lot going on.  It's hard to remember.  But it seemed like I ought to take the raddle off.  I like both suggestions and going over the top makes a lot of sense. 

I'm so glad to have found people who have experience with my loom.  I put it together with a partial set of instructions while I was pregnant.  When it came to tying up the harnesses I couldn't figure out what I should be doing to save my life.  I'd gotten too big to crawl around in the loom anyway and I put it off for another 6 or 8 months by which time I'd thought it through.  Since then I've shown that I can make it go, but I'm still not pushing the loom to it's limit.

I've been warping front to back, but I got it into my head that I should start working back to front.  Thank you again for sharing your experience.

-Erica

sequel (not verified)

I sometimes leave the raddle in on my Minerva because it seems to improve the tension on the lower shed, otherwise the lower shed can be a little slack and cause the shuttle to submarine because the Minerva does not have a shuttle race.