siseltikva (not verified)

Thanks so much! I would have never found that. :) 

Caroline (not verified)

hi, if you are having problems picking up every other warp thread to make a shed and get the continuous heddle on them, its worth using a temporary 3rd shed stick. You then pick the warps from those threads that go over the first 2 shed sticks, which gives you your 2 alternate sheds, then remove the front shed stick, and both sets of heddles will run free up and down the warp. This can be quicker and easier than trying to pick up alternate threads through each other, and you can easily check  that you have no crossed warps.

Ask me how I know...<grin>.

Caroline (not verified)

If you lose your cross, for whatever reason, it doesn't always come back looking like that, grrrrrrr! and sometimes its not obvious to the untrained eye that the warp threads have not gone through the cross in an orderly manner, even if you think you have checked them. If you cross the first warp you pick up for the continuous heddle, you can inadvertently end up with a bunch of twisted warps - after a debacle like that its sometimes  easier to add the third lease stick at the back, and work off the first 2 to pick up the warps on the heddles. Its clumsy, but it also provides a "security blanket' you can use to check that the warps have not crossed, particularly useful if using a black or fine warp, because you can tug the warp you are about to pick up on the first row, and check that its in the corresponding place on the back lease stick. If not, something has crossed and twisted. This does assume that you have correctly picked the sheds in the first place and that the warps are in their correct order in the cross. If not, its easier to start all over again.

This is where a video is worth a hundred clumsy verbal descriptions. I can only tell you how I solve  losing or destroying the cross, without have to undo everything and starting again.

Caroline (not verified)

Yes, both times did require extra sheds like twill, which increases the chance of accidentally crossing warps considerably. The first time I jumped up and not only lost the lease sticks, but because the continous warp was only loose on the front and back loom bars.....................'nuff said.

I was stubborn. Stood me in good stead when the warp I dropped was for a twill, hehe! and its handy for changing the warp pattern too.

Night all!

siseltikva (not verified)

Thanks so much! You guys are really great! This is really helpful. I think I just need to be REALLY careful when I'm warping and make sure all the warps are in the right place, and being really careful when I'm making my heddles too. The close up pictures definitely help. Yesterday (band #2), I switched to a different color weft so I could see what my selvedges were doing and they were doing something weird. Again, probably crossed warps or incorrectly strung heddles.

I think I can picture what you're talking about, adding a temporary stick. Would that be like the tutorial for adding a second cross? I can see where that would be helpful, to be able to tug on a warp yarn and make sure it was in the same place on the third stick.

My sister (floor loom weaver and otherwise fiber geek) gave me some of her carpet warp left over from school in some lovely colors, which I'm pretty excited about. The great part is I can get it locally! Well, sort of. Its 45 minutes away, but I have other reasons to go to the town that its in (like friends!) so its worth it. (The carpet warp is probably from here: www.yarn.com/webs-weaving-spinning-weaving-yarns-fiber-cotton-cotton-blends/webs-weaving-yarns-maysville-84-cotton-carpet-warp/) I've read that some of you have used that. I will make sure and add it to the "suitable yarns" thread if it works out well. Does it wear okay, I mean if I use the same carpet warp for my heddles? I have some nylon yarn that I could use as well for heddles, if I needed to. She also gave me three small bobbins of perle cotton (5/2 perle cotton I think).

Thanks for all your help! I think I'm going to try a small warp of carpet warp later today, and pay all kinds of extra attention, and use the knot diagram for retying my end warps. Thanks for all of your encouragement, I'm trying not to get discouraged. Afterall, I've never woven anything before two days ago. :) (Okay, okay, I did make a plain weave picture frame loom once, but I had no idea what I was doing, and I only wove about an inch. And that warp was warped right on the loom) 

siseltikva (not verified)

Warp #3 went a lot better! I was really careful when I warped and made my string heddles, so there were no crossed warps this time. I tied and retied and cut (probably bad!) and retied my end warps, throughout the weaving, to get the tension right. I played with the tension a lot on the end warps, and I'm not sure if at some points they were too tight. I can't tell. I also varied how tight I was pulling the weft through. I noticed about halfway through that I was sort of pulling the weft down, like in a lowercase n shape, and so I stopped doing that and I think it looked better. Also by the end, I had taken a lot of tension off the loom, and I wasn't pulling so hard on the weft. You can tell a big difference in flexibility in the first and last sections.

beginning - too loose?

Here's the beginning of the band. I think the end warps were too loose here.

The middle

I think this was improved, but I think it got even better after I let some of the tension off the warp in the next picture. I also wove most of the last picture horizontally, which I liked a lot better actually!

the end

Does this look about right? I think I've been staring and critiquing and fooling with the end warps for too long. I don't even know what they're supposed to look like anymore.

It kind of fell apart after this part. My end warps started getting even more slack for some reason, and one of them came untied.

I had a question about the end loops... should I just weave over both layers? Like in the next picture, I wasn't quite sure waht to do. You can see the other side of the end loop on the far left side.

what to do

Thanks for all your help and encouragement! The carpet warp worked really great! It didn't pill a lot, and it didn't shred either like the worsted weight dish cloth cotton I was using the first time. It only got really sticky at the very end.

 

siseltikva (not verified)

Oh okay, great! Those are great ideas for the nearing the end of my piece. Oh, I was ready to cut it off lol by the time I got to the knots. It just got really hard to maneuver at the ends. :) And I did cut it off, right after that.

Throughout the weaving I did try to take up the extra slack with different sized dowels, but sometimes they didn't seem like they did enough. I guess that means the end warps were REALLY slack lol.

I hope its okay that I'm documenting on here! I do hope it helps somebody :) 

I just used the same carpet warp for the heddles, and it really turned out fine. I actually didn't think it would, but it was great. I just the same color as the warp yarn, so it wouldn't leave fibers of a different color on the warp, but if I'm going to cut the end off it probably wouldn't have mattered.

Do you think I should be beating harder? The ends of my warps look kind of "longer" than yours, if you know what I mean. Like the wefts of different color are farther apart on mine than on yours.

Thanks again for all your help!

Bobbie2 (not verified)

Siseltikva, Thank you so much for sharing your first attempts at your backstrap weaving.  I just warped and tried my first attempt earlier this evening and was having all the same problems you were.  It's nice to know I am not alone and this will help me to solve my problems.

djfiberarts (not verified)

What are Pendleton strips?

DJ

Bonnie Datta (not verified)

Pendleton in Portland, and possibly other suppliers, sell the trimmings from their woolens -- blankets, fabrics, etc.  There are two kinds that I know of: the worms, that are 1-2 yards long and are like felted wool chenille; and selvedges, that are very long and fringy and not felted at all.  These are very cheap to buy but postage is a bear as you need to get many pounds.  The colour selection is varied -- in one box of worms (50 lbs) I had about 20 different colourways.

Bonnie.