Bonnie Datta (not verified)

Thanks for your interest Sharon.  I haven't seen any of Staudigel's books, but I also did some ram's horn and variations thereof on 6-holed tablets:

Please excuse the little strings and tags that are sewn into the selvedges -- these are my numbering system and I don't want to remove them.  They link to my pattern files and notes.

The threads used for all of these samples were nylon -- because I had it and I thought it would be good for samples that might be handled a lot.  It wrapped at about 30 wpi.

I group my tablets according to the pattern which has grid lines every 6, 8, or 10 columns.  So I would group so that all tablets between grid lines are together.

For weights I use some scrap metal pieces that I got from a metal recycling place, also some fishing weights.  For big projects (lots of tablets) I use the round weights that come with gym sets.  I like a very taut warp so I put lots of weight on.

These sample bands were warped about 5 yards long (I think).  I made 10 warps altogether, and wove 120 different patterns/images in 5 techniques (threaded designs, repp, diagonals, twill, diagonals with floats).  I should mention that in my original post I wrote 3/1 repp and 3/1 twill -- that is incorrect as on 6-holed tablets the structure is actually 5/1.

On the warp-weighted loom photo, the distance from the ground to the upper dowel is about 6 feet.  What's important is that you can raise or lower the whole arrangement so that you can weave comfortably either standing or sitting.  The fell line of the textile should be at about shoulder height (for effectively beating upwards), and the tablets should be just a few inches above the elbow (for ease in turning them).

I have done scans of both sides of a portion of 5 bands:

    

Bonnie.

rose Goldielocks (not verified)

thanks! thats the kind of info I was looking for, espeically about that the fell line should be at sholder level

the scan of both side of a portion of the bands is perfect.. it lets me see how the pattern transfers (or not) to the backside.

the tags and strings are normal... you will love it much later in a few years when you teach classes or want to repeat a portion of the bands.

 

Thanks again! Sharon

 

Evelyn (not verified)

Oh my - those are all amazing and wonderful.  I am just beginning to explore tablet weaving having tried it once a long time ago.  So much to learn and I have been reading everything I can and now have a sample going in double faced technique.

Cathy (not verified)

Su --

Currently I am not weaving anything in chenille, but I have a couple of projects in mind.  I have done some scarves in the past without problems, and a throw for my daughter which was my first chenille project and with which I experienced what seemed like a lot of broken warp ends.  I said I would never do another blanket at the time.  My son, however, wants a chenille throw/blanket wider than my loom.  I have been trying to get up the courage to try a double-width blanket.  Have you done double-width in chenille?  Any advice? 

I have been to your website.  It looks like the only way to order your book on CD is via snail mail with a check.  Is that correct or did I miss something?

Cathy

Maryse Levenson (not verified)

I just finished a chenille scarf using 3 different reds and a bit of supplementary warp. A black, a natural and another black ribbon. I found it quite lovely as it shimmer in the light.  Now i hope that the customer likes it. 

How do I put pictures here?   Thanks.

Maryse

Maryse Levenson (not verified)

Whoa!  Amazing!  I tried to dye chenille warps a few years ago and ended up with a mess.  How did you keep everything without tangles?  I love your design, is it OK to share your technique?  I will try  adding a picture.

Maryse

PS:  I wish I could take your lecture!  Where will this take place?

Maryse Levenson (not verified)

PS:  Did you warp F2B or B2F?   Maryse

Maryse Levenson (not verified)

Thanks Su.  If you warp B2F you must use the raddle at least for this kind of warps.  I also love your design and it better not be a tie weave or I cry......

In you message #8 you said that you will lecture on rayon chenille in IL.  this is why I asked.  I  will sometime go to Chicago and visit my daughter so you never know :-)  I am looking forward to your CW lecture.  I will give your name to my guild workshop chair.

I wove 3 of the 4 red scarves I had on the loom but I am getting bored although I did some ribbons supplementary warp. I want to make the last one with colored blocks here and there  unsing clasp weft.  I hope it works!

 I printed the directions for posting pictures but I haven't been successful yet!

Maryse

Maryse Levenson (not verified)

3 hours?  Well, it take me a bit longer to weave a plain weave scarf at 16 ppi!  I was a lot faster but I am getting slower and slower.... 

I looked at you scarf again, let see if I get it right :-) The weft green chenille weave the pattern and I expect that you use a fine  thread as the tie down.    The warp is of course the painted warp and threaded with the pattern.    The warp was set at 20/24 epi and the weft  was woven at 20/24 chenille + 20/24 for the fine thread.  Now this open lots of possibilities!  You were correct when you told me that I was thinking "overshot".    I have made a few overshot coverlets and could only imagine my S&W warp ends (unless the pattern was turned) to be the same fine threads as the weft tie down.  It seems that it can be done either way.  It just gives a different look.  This means that, for my samples, if I use chenille in the warp my fine thread could be used as the weft tie-down.  Of course, I could use this fine thread doubled or tripled in the warp and the chenille in the weft with a single fine thread as the weft tie down.  How wonderful!  There is nothing like talking out loud to solve a problem.    At least I am not too old to learn new tricks.  And you are a treasure to put up with me!

Maryse

 

 

Maryse Levenson (not verified)

OK, I think I got it.  Not quite sure yet of the reason why using thick or thin warp threads is alright  as I am still a bit stuck on overshot but I think that in overshot it is necessary to use a fine thread in both warp and weft because the pattern needs to be squared but in tie-weave this is not necessary.  If this is correct then I got it.  Cool.    Now I need to look at all of my yarns adn see what goes with what and get started. 

Do you think that we need to move this conveersation to CWTW?

It is snowing and cold here, a good day to weave and watch the super bowl. 

Maryse