Janet (not verified)

 Hi 

I would think that if you have 3 heddles you would need to have 1 and 3 up and 2 down to get a clear shed. Then, reverse it so 2 is up and 1 and 3 down. Have you tried that?  At rest, you have no shed from any heddle so it makes sense to me that if you want plain weave, all 3 heddles need to be somewhere.

See if that helps,

Janet

WeavesToo (not verified)

 Thanks-I've tried a few things but may not have done that clearly enough, so will give that a try.  It does make sense.  I keep thinking, "if he has #2 at rest all the time, what is it really doing???  I started trying to follow threads visually and now my eyes are crossed.  LOL.

WeavesToo (not verified)

 Well that wasn't it.  I am not getting tabby.  I don't get every other thread up.  I wonder why I wasn't happy just weaving with one heddle??  I"m fighting the idea that maybe I threaded wrong.  I get something regular but there are three to five threads (depending on section) between the two up/down threads.  Drat-that was the end of my weaving time today!

Caroline (not verified)

I've just read through McKinneys description of getting the 2 sheds. Its not terribly clear but here goes what I THINK it says ( can't be sure it will work!):

1st pick:  Raise heddles 1 & 3, heddle 2 just hangs and its weight keeps it in place, but you are probably only getting a 1/2 shed to insert the sword, which is why you have to use it. The warp will be raised to make the sheds, with the warp on the number 2 heddle going straight across.

2nd pick: Phycially lower heddles 1 & 3 so that they are below heddle 2, which doesn't move. Basically thetop of the warp will be flat, instead of raised. The shed created by lowering heddles 1 and 3 will make a tiny shed immediately underneath, and this is where you insert the sword to create enough space to put the shuttle through.

Heddles 1 and 3 do not "rest" in the neutral position that heddle 2 "rests" in, they have to be deliberately lowered below the level of heddle 2 to create the shed.

i assume that this is what he means - please excuse the rough drawings - I tend to get a bit messy - but you should be able to see where the shed appears. Hope this helps.

There is also the photo of heddles 1 and 3 in the up position on the front cover of his book.

WeavesToo (not verified)

Thanks, Caroline.  Great drawings-I should have figured out how to do that to clarify my question.  I won't get to weave until tomorrow.  The shed almost looks like it is evenly split, with a set of ends at the top, one in the middle and one on the bottom (when 1 and 3 are lifted.)  Maybe my #2 wasn't in a neutral enough position.  It seems like I shouldn't be having such a hard time!

Caroline (not verified)

You are never going to have large sheds - they are not large on a rigid heddle loom for starters, and you lose half of that by using the 3rd rigid heddle.

I'm beginning to think that perhaps its easier to put in continuous string heddles instead of using 3 rigid heddles to create the different shafts. There is less calculating to do, and you can follow the original draft and lift plan. I've done a twill on a frame loom like this, and it was not too hard following the order of lifting. It was slow, but I suspect that using the 3 rigid heddles is going to be slow as well.

Good luck!

WeavesToo (not verified)

My plan now is to use the pick up stick for a few throws, observing what the shed looks like for the two lifts, with the sword in place.  My hope is that I start to recognize the shed I'm after.  I realize the shed won't be great...but I have to get better at it or this project joins my history of "warps from h-e-double-hockey-sticks."  I'm thinking that part of the problem is ends sticking together where there are two in a slot, so maybe the header weaving will help.

I got one throw in last night, on to the next!

I hear you on the string heddles.  Right now I'm thinking slow with progress would beat slow with nothing to show!  I'd like David McKinney to publish a you tube or a great flicker set on his sheds!

WeavesToo (not verified)

I'm using three heddles to do four shaft patterns, supposedly without a pick up stick ala the David McKinney bookleth

ttp://www.amazon.com/Weaving-three-rigid-heddles-introduction/dp/B0006ELT6E

Caroline (not verified)

McKinney has a self-published book on using 3 rigid heddles to achieve 4 shaft weaves. Its fairly limited in its scope, and while it covers a twill sampler, it doesn't cover things like Rosepath  or the other overshot patterns, which I think is what most  are really after. I haven't had a chance to look at the Xenakis technique for creating 4 shed weaves, but suspect its just as difficult to follow.

WeavesToo (not verified)

Well last night in my 15min of weaving time, I did another throw, after threading the pick up stick through.  (again, my hope was that this would help me see the shed the heddles give.  So far, not so good!

I am beginning to think this simply isn't going to work.  I don't think it's helping that my warp is cotton not wool.  No extra stretch, no surprise.  If I tighten the tension, to try to get the ends to separate better in the heddles, where there are two ends in a slot, I can't move the heddles.

I'm really good at creating warps from H***.  I'll persist to 2in of header but I have my doubts.  I'll also see if anyone local wants to take a look.