rose Goldielocks (not verified)

I think its great that that the  handwoven article on the PVC inkle loom is getting used!

I wrote it so that new weavers could weave without going into debt, buying a large loom they have no place for , and find out that they don't need.

There are other versions around, and you can adjust sizes and shapes as you switch between different kinds of projects. (I have been know to string my sprang on it)

 

Sharon

 

Caroline (not verified)

What kind of PVC do you use? Is it furniture grade? If so, what is the difference between furniture grade and plumbing PVC? I can get any amount of plumbing pipe, but I don't think it would stand up to very much stress. I've seen upright tapestry style looms made from PVC as well and it looks like the ideal thing to take along for demonstrations etc. I notice that in some of the videos on Youtube of South East Asian backstrap weavers, PVC agricultural pipe often gets used for back beams and for running repairs on other beams and uprights etc. They slip it over the damaged part.

Plumbing pipe, in my limited experience, is somewhat brittle and shatters easily. This is the one major drawback to using it - does the furniture-grade pipe suffer from the same problem?

kitsune (not verified)

You wrote it?  Awesome.  My DH has co-opted the loom we built off of that article and he's loving it.  I did get to use it once before it became his new toy.  I think before too long I'll get to play with it again, but it did help me get a feel for how things work. After finding this group I can honestly say I'm completely addicted.  Thanks for writing the article, it propted the purchase of that issue, and of our learning to weave.

rose Goldielocks (not verified)

In my experience, the best PVC to use for looms is CPVC, it is the cream stuff, sold next to 10' lengths of copper pipes in the big box home improvement stores. Typically the CPVC comes in only 2 sizes, 1/2 inch and 3/4" , and is about 2 times the price of the similar sized  white pvc that comes in all sizes from 1/2" to 6". (the Cream CPVC has thicker walls, and I have not had it shatter yet, after about 3 years of using it, and leaving it in a hot Florida sunny car.

If your loom is going to be used for a few expericments, the smaller diamenter (1/2 inch) is fine. My 'most used' PVC looms I have use the larger size 3/4" CPVC.

The trick to using the CPVC is to think small, as lengths greater than 12" bow. It is fine to have bowing in the long (warp wise) demention of you loom, but if you are going to set up a wide (greater than 10")  tapestry loom, don't even consider CPVC.

I don't have any acess to Funrature- grade PVC... other than I stoped at a outlet store where they make furnaure from it. A "weaving bench" looking like a footstool, just a little bit higher, was priced between $30 and $40, cheap enough to consder if I were not handy with tools.

If you are going to make a lot of the little looms, for demo purposes, the best tool is a pipe cutter, its a little tool with a roller that cuts like a canopener that you wind around the pipe. For 1 loom, use a saw, the decent pipecutters are in the $6 to $20 price range.

As for the You tube demos, the PVC agricultral pipe in larger diameters, 2 to 3 inches,, I admire the women for using it. It is lightweight, easlily avalible, and makes a wonderfull shedrod.

pegofmyheart (not verified)

Hey.....There's an idea.  Hang them from hooks.  Thanks, I'll have to remember that.  What's this about breeding dowel rods.  I wasn't aware of that and hope I can find same sex rods that don't multiply, at least not too quickly.  Thanks for the heads up.

Thanks,

Peggy in Utah 

Caroline (not verified)

As long as you have dowel, you have the makings of a loom!

franee (not verified)

Thanks for the welcome :)

My name is Fran and I live near Sydney in Australia.  I'm an avid sewer, stitcher, knitter and this year learnt to spin which I also love.  A lot of magazines aimed at spinners are also aimed at weavers and it has been sucking me in, but it was going to be a while before I could afford a loom.  I was thrilled when I found out about the back strap loom and am off to start 'building' mine today - wish me luck :)

Caroline (not verified)

hi Fran, I'm melting in Adelaide; its not nice this morning because i have to whiz out, grrrrr, but with a bit of luck the change will be through tonight. If you need any help putting your loom together, you can PM me - I will be around later on this morning

franee (not verified)

Thank you Caroline and Laverne,

My 11 yr old son was a good help today with cutting and sanding bits of dowel.  I even managed to weave about 12" of 4ply cotton at about 2"wide (46 total wraps).  I'm really thrilled with the whole process and am going to work on smoothness and even edges.

Cheers

Fran

tobytottle (not verified)

Hello All!

Thanks for your PM Laverne, and for all your help over on the Backstrappers Yahoo Group!

I'm finding some time every day to make some more progress reading through all the material online that relates to backstrapping; mostly here on Weavolution, on Weavezine and on the Yahoo Group! I am separated from my loom for another few days, but as soon as I'm back on the house boat, weaving begins again in earnest! I'm excited to try some of Laverne's tutorial pieces on here, I can't express enough thanks for making all these tutorials with photos, Laverne - amazing!