claudia (not verified)

We are proceeding with the rosepath project Laury Fry published in Weavezine. I'll be posting more information in the next two days. It's a perfect WAL for you and your new Dorothy.

Join us, please.

Claudia

mischiefmanaged (not verified)

I've been keeping a blog with a long-time friend for a couple of years (she lives in Arizona and me in Wisconsin). It is named after her wool-obsessed cat and is mostly about our crafting adventures. I just did a post (the first of many, I hope!!!) about backstrap weaving:

http://knit-n-spinninkitten.blogspot.com/2010/01/on-weaving-and-weary-mind.html

As you will see, I'm a bit stuck and welcome any suggestions from weavolution members, either here or on my blog! Cindy

Caroline (not verified)

Hi Cindy, the first thing you need is a solidly reliable warping board. If your board is otherwise OK, glue that wobbly peg back in because that is only going to cause more grief, and make sure it goes in straight!  Continuous warps are not as  forgiving as the warp on a rigid heddle loom, although you could take a leaf out of loom warping: when I warp my RH loom I tie knots in the warp at the front beam then use strong cord to loop those knots onto the beam. Sounds complicated but it works wonders for an even start! Its no good if you are wanting to start with a  selvedge, but if you are happy to have a fringe its great. PM me if you want to know more.

Otherwise you can hang bits of nuts, bolt, nails and or fishing weights off the back of the loom to keep the loose warps tensioned, but if you don't have equal tension on your warps, it all flows through into the weaving, and to get even tension you need to be able to get each warp thread exactly the same length as the one next to it, and that takes practice. Remember that the people in the videos on YouTube have been weaving since they were kids, so they make it look soooooooo easy!  And Laverne has been at it for years, so she makes it look very easy too, lol! The rest of us do fringes, and hem our pieces.

claudia (not verified)

The backstrap group has been invaluable at helping put Weavolution on the map, er..web. Anyway, I get a little nervous when I see you moving off here and onto your blogs. I hope you will all continue to use Weavolution and continue to add all your beautiful projects to your notebooks.

Claudia, Weavolution co-founder

claudia (not verified)

Whew!

At one point this afternoon, I checked the Hot threads and every single current comment was from a thread in the Backstrap group. I think you are the busiest person on Weavolution.

And that's why we love you!

Claudia

franee (not verified)

I take a full 'session' just to set up my little projects, and don't get time to weave until the next day lol.

Aunt Janet (not verified)

I had a leaning warp recently.  it was the widest piece I had done yet, and now I realize for wider pieces I can't use my warping board because as I get out away from the board the pegs begin to pull in.  However there I was with the leaning warp.   I cured the lean at the beginning of the piece.  I wove with the warp slanted at my near end, but wove it straight instead of following the slant.  After weaving for an inch, I took out the near stick and reinserted it into the warp above the inch of weaving.  I was all straightened out, with just a few inches of waste.

Aunt Janet 

Aunt Janet (not verified)

That makes sense.  That is exactly the way I'll warp my next wide piece.

Aunt Janet 

bibi (not verified)

well, that doesn't make any sense for me ! can you show pictures of how you process ? because I will soon try wide piece, so I'll be very happy not to suffer too much :)

Michelle

bibi (not verified)

I got you !!! lucky me, I posted the pictures just before I ask you a favour !!!

Michelle