Caroline (not verified)

Theres also a Peggy Osterkamp book on warping, but I think its very hard to get hold of, at least here in Australia it is.

The first time is the scariest because its such a huge learning curve. I probably do it all wrong, but I divide my warp and find the central threads, and work out wards one side at a time. I have health problems that makes bending over the loom very difficult, but I find if I take it in 1 or 2 inch batches I can work through it. It might eventually take a week, but I do get there. Its tedious more than anything, and by the time I am finished, the warp order is imprinted on my memory. Because I am doing it in short bursts, its much easier to spot a mistake and rectify it, so it has its advantages!

The biggest things to worry about is dropping everything at a crucial moment, so make sure your cross is preserved and everything is as secure as possible, and allow yourself enough length in the warp threads so you can move in comfort - you are less likely to drop or lose the warps you are working with.

And most importantly, slow and steady gets you there. If you rush it, you make mistakes, so you are better off having a coffee break if you start to feel frustrated. You can go back to it refreshed. You could even reward yourself with choccie at various stages of completion, or is that not really allowed, hehe?

Good luck!

dawnmaryfuller (not verified)

I've learned to knit and now want to learn to weave. I just found a 36" loom on craigslist that's reasonably priced. I have no idea what questions to ask so I don't get taken advantage of.  I'm definitely going to order the "Learning to Weave" recommended in earlier comments. Any hints on questions to the seller?

francorios (not verified)

Can you paste the link to the craigslist ad over here?

We can go look at it and make suggestions.

Have a good day!

Caroline (not verified)

Much of what we can help you with will depend on the loom you get.

I'm assuming that the loom you are looking at is either a floor loom or one of those larger, bulky older style 4 shaft table looms, in which case you will need to find a stand on which to put it on. Those babies take up a whole lot of space, more than a modern floor loom!

Because of the different ways that looms are built, there really is no one size fits all advice to get you started, as they even all warp up in different ways, let along work the same way once you start weaving.

As a rule of thumb, if it does not collapse for travelling, and is difficult to move, the cheaper it should be!

Try and find out how long the loom has been advertised; the longer - the cheaper, and the harder it will be to move. Its not cheap if you need to rent a truck and 2 men to shift it!

Buyer beware! Vendors have been known to ignore cracked wood, rust, missing bits etc, and it may not be worth anything more than a bit of kindling if it is an old loom. Many vendors are not weavers and have bought looms thinking they can retire on the proceeds of selling it.

Get a brand name and ask in the general weaving section here on Weavo what people think about it, the more opinions the better.

Contact your local weaving Group or Guild; they can not only help you with getting started, lessons, supplies etc, but they may have a loom you can borrow first, to give you a chance to save up for a nearly new modern loom, or else they will know of pre-loved looms for sale that  are worth considering, and where you won't waste your money on something thats sight unseen.

Good luck!

kds1679 (not verified)

Thank you, Thank you, Thank you. I am one of those newbies. Lots of times I feel like I don't even know enough to know what to ask. The more I learn, the more questions I have. I can tie my brain in knots trying to figure things out and I wonder if I will ever learn enough to feel comfortable with it. Weaving has been a passion for me since long before I can remember. I have to keep at it.

Caroline (not verified)

Your best bet is to get hold of one of the old standards in weaving books, and use that as a base to start from. Many of them can now be found at library sales and in the thrift shops - Amazon is too expensive as they actually have a collectable value because of their age, grrrrrrrr!

Mary Black - Key/New Key to Weaving ( 2 different names for different editions - all are good)

Rachel Brown - The Weaving Spinning and Dyeing Book

Shirley Held - Weaving

and John Tovey has written a book who's name escapes me for the moment. There are a few other older books too I have missed. They may not have the glossy photos of the newer books, but they are high on content - more technique for your dollar!

Then if you don't know something or don't understand something, ask away! Some of the older books were also written in older English, and were very hot on calling things by their correct names, something we get a bit slack about now. Weaving hasn't really changed; the techniques are as old as the hills! Its how its presented these days that makes the difference, and all the exciting new yarns on the market to send us into stash acquisition overload.

And of course when there are sites like this with loads of people obsessed with the same things you are, and happy to chat about it 24/7.........................! The fabulous thing is that we all come from various backgrounds in weaving, and many of us are happily exploring new techniques thanks to the forums - the rigid heddle group and the backstrap group have both had WALs and these have covered the basics to more advanced techniques, so dive in and have a go, and enjoy yourself!

Milly (not verified)

Thank you, what a great group. I haven't been weaving as much lately because I'm having trouble keeping my edges even and didn't know where to turn for help.

I think maybe it has something to do with the yarn being used, it is a heavier weight than my first project, it is also a silk blend, and before I used cotton. 18:2.

Anyway, I have tried everything I can think of to make my edges more uniform and neat, any suggestions? This is only my second project.

 

Thanks.

Caroline (not verified)

Even edges plague most of us, Milly! No matter how hard you concentrate, one side is better than the other, grrrrr!

You can use something called a temple or stretcher, that holds the cloth in place, when you place it several rows down from where you are weaving. It does have to be moved quite regularly, or it won't do its job. If you don't have one, don't worry. I use a bent paper clip that goes into the cloth a couple of warp threads in from each selvedge, and is tied to the side of the loom. This can be improved by tying to some weight instead, like a couple of metal washers or metal nuts, or fishing weights,  and the weights are then hung over the sides of the loom. The weight will keep the stretcher at a consistent tension and so help maintain an even edge. Its also much easier to move it along the cloth as you weave.

Also, when you are laying the thread in the shed, do you arc it? If you are doing a balanced weave, you need the extra length in the shed to allow the weft to go around the warp threads and lie properly. A bit of practice will soon let you know how much you need to allow for the yarns you are using.

Some weavers will tell you that you NEVER EVER fiddle with the edges as you lay in the shot. Quite a few rigid heddlers and backstrappers do nip the weft at one edge as they give a gentle tug at the other side to straighten the weft, and it may be that this works because of the type of loom and style of weaving they do.

It can also make a difference when you beat the fell with the beater or the rigid heddle. If you beat it in the open shed where you have just laid in the weft, it can bounce out again. If you beat after you change shed, or with the sheds or shafts in neutral, the weft should be gripped by the warp and not have the tendency to go walk-about.

But most of all, don't worry about this! In Saori weaving its the act of weaving that is important, not having precision selvedges.  I think its far more important to enjoy what you are doing, instead of worrying yourself into dreading weaving, as appears to have happened in your case. Remember, its the little mistakes that give hand-weaving its character, and differentiate it from a manufactured piece. In many cultures, it would be presumptious of a weaver to attempt to create a perfect piece, as that is the prerogative of the Creator.

Go back to your loom. I'm sure that once you stop thinking about how crooked your edges are, they will straighten up by themselves! Enjoy what you are doing, and please post photos.

LauraSue (not verified)

Hi.  I just drove over 400 miles today to pick up my new to me LeClerc Aristat loom.  It's a 4-harness jack floor loom.  I have no idea how to use it.  Fortunately for me I went with a friend who is a professional weaver and who walked me through the process of choosing.  She will come back and teach me how to warp it and then off I go.  I don't know enough yet to even have a question.  I am excited, though about this new adventure.

Caroline (not verified)

Great! Once you get the hang of it there will be no holding you back!

Do you have any weaving books? Many of them do go through the process of warping up and tying up to the treadles - I worked mine out using the Mary Black "New Key to Weaving" and I'm pretty sure the Debbie Chandler book covers it too. Both those books are good for new weavers; if you can handle the old fashioned format of the Mary Black book, it is the more useful, as she covers far more, but both books are set out as a teach yourself course, so you can work on your own.They are both a worthwhile addition to your weaving library, and often come up on Ebay at reasonable prices.

For yarns: the tension on your loom is far greater than the tension on a table loom or rigid heddle loom, so while you can use knitting yarns for weft, its not strong enough to use as warp when under tension. If you check the advertisers on Weavo like yarns.com and Halcyon yarns, you will get a very good idea of what is available and what prices you can expect to pay. I have dealt with both companies, and many of the others, and they are quick and reliable when it comes to internet ordering ( I'm in Australia), my only problem being which one of them do I choose when I look to place my next order!

All questions are welcome, there is a vast amount of knowledge on this site, and the weaving community is friendly and helpful -  the members here fall into the "wicked enabler" category, they are brilliant!